PRODUCT RANGE - Krahn Chemie GmbH
PRODUCT RANGE - Krahn Chemie GmbH
PRODUCT RANGE - Krahn Chemie GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PRODUCT</strong> <strong>RANGE</strong><br />
COATINGS, CONSTRUCTION CHEMICALS<br />
RUBBER<br />
ADHESIVES AND SEALANTS<br />
PLASTICS<br />
LUbRICANTS<br />
TECHNICAL CERAMICS
KRAHN CHEMIE – A STRONG PARTNER<br />
WELCOME TO KRAHN CHEMIE. As an independent chemical<br />
distributor and sales and distribution partner to leading producers,<br />
we know that some things are simply better together.<br />
That’s why we connect markets with innovations, processors<br />
with producers, and questions with solutions.<br />
At KRAHN CHEMIE, you can find everything that a processor<br />
Additives<br />
2<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
Accelerator Nocceler Puyang Willing<br />
Ouchi Chemical<br />
Co.<br />
Robac Robinson<br />
brothers<br />
Anti-ageing agents Robac Robinson<br />
brothers<br />
blowing agents,<br />
chemical<br />
Organic rubber chemicals for tires and automobile rubber<br />
parts: CbS (N-cyclohexyl-2-benzothiazole sulfenamide)<br />
widely used in NR, SbR, NR/bR, and other synthetic rubber<br />
based compounds. MbTS (2-2 dithiobisbenzothiazole) used<br />
with NR, SbR, SbR-NR/bR blends, NbR, IIR, EPDM and<br />
other synthetic rubber based compounds.<br />
broad product range including Dithiocarbamates (e.g. CuDD,<br />
Arbestab Z, ZbeD), Aqueous Dithiocarbamates (e.g. SDbC,<br />
SDEC), Activated Dithiocarbamates (ZDbCX), Thiurams<br />
(e.g. DPTT, TbzTD, TETD), Thioureas (e.g. DETU, LATU ,<br />
TRIbTU), Xanthogens (e.g. AS100, DIXD), Robac PM Polymer<br />
Masterbatches.<br />
Robac antioxidant dithiocarbamates have powerful antioxidant<br />
properties: high solubility in hydrocarbon polymers,<br />
protection against heat and UV degradation, low nitrosamine<br />
percentage. Used in cables, hoses and under-bonnet applications.<br />
Used in NR, CR, CSM, ECO, NbR, EPDM/EP, latex<br />
compounds and in polyolefins.<br />
Unifoam AZ Hebron Azodicarbonamide – Exothermic chemical blowing agent for<br />
fine pored and regular foams, e.g. insulation foams made<br />
from synthetic rubber. The pure ADC is available in various<br />
particle sizes ranging from 3.5 to 23 µm, both as standard<br />
and as low-dust Ultra series. For low temperature applications<br />
also modified grades with kicker are available.<br />
Co-stabilisers Epovinstab Hebron Epoxidised Soybean Oil. Secondary Plasticiser and Co-Stabiliser.<br />
Yellow liquid, available in drums, IbC‘s as well as bulk<br />
to be applied as a co-stabiliser because of its good heat resistence<br />
and as secondary plasticiser for rubber, e.g. rubber<br />
mixtures for conveyor belts or other technical rubber parts.<br />
Metal soaps Alugel ® baerlocher Aluminium di-/tri-stearate. White powder with fine particle<br />
size distribution for good lubricating properties within the<br />
compound. Following types are available: Alugel ® 34 TH,<br />
Alugel ® 30 DF.<br />
Calciumstearat<br />
C85<br />
in the chemical industry values: a broad range of products from<br />
top international producers, competent technical support, and<br />
excellent service. We share your high standards in terms of<br />
speed, flexibility, and quality – and have proudly served as your<br />
strong and reliable partner for more than 100 years.<br />
We look forward to assisting and advising you.<br />
baerlocher Calcium stearate. Highly pure, fine powder with large surface.<br />
Use as release agent.<br />
MG Siel 1 baerlocher Magnesium stearate, white powder as mold release agent for<br />
compounds. Hydrophobic agent for bicarbonate- or phosphate<br />
containing formulations. Used as acid scavenger e.g.<br />
in chlorinated formulations.
Additives Continued<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
Metal soaps Natriumstearat baerlocher Sodium salt of the stearic acid, sprayed, white powder.<br />
Effective release agent in compounds.<br />
Adhesion promoters<br />
Zincum baerlocher Zinc stearates. Fine, white powder with extremely large<br />
surface with excellent release properties.<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
Chemlok ®<br />
Chemosil ®<br />
Parlock TM<br />
RUBBER<br />
Zinkfluid baerlocher 40% dispersion of a zinc stearate. Avoids sticking of semi-<br />
and finished parts during dipping or spraying. Does not leave<br />
deposits and will be absorbed by the rubber during vulcanization.<br />
Release properties can be varied by dilution to 10,5%<br />
or 3%.<br />
Zinc oxide Zinkoxid Empils Zinc Metal oxide made by pyrogenic oxidation: Activator for<br />
sulphur-vulcanisation and curing agent for carboxyl and<br />
halogen-contenting rubber. Acid acceptor for peroxide curing.<br />
In higher dosage also improvement of elastic properties and<br />
heat resistance during dynamic forces of the rubber.<br />
Fillers And reinForCements<br />
Lord Germany broad product range of rubber to metal bonding agents. The<br />
bonding is characterized by a high adhesion and resistance<br />
against corrosion, high temperature, oils and solvents.<br />
All common vulcanization methods, like i.e. compression-,<br />
transfer- and injection procedures as well as autoclave heating<br />
with steam or hot air, are applicable.<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
Glass microspheres MinTron TM RockTron<br />
International<br />
intermediAtes<br />
MinTron TM 7 RockTron<br />
International<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
Alumino-silicate spheres, predominantly spherical, 100%<br />
recycling material = eco-minerals with minor carbon footprint.<br />
Particle Size Distribution d 90: 35 – 55 µm, Particle Size Distribution<br />
d 50: 8 – 14 µm. Performance: Filler for plastics to replace<br />
ordinary glass beads and to improve the mechanical<br />
properties.<br />
Alumino-silicate spheres, predominantly spherical, 100%<br />
recycling material = eco-minerals with minor carbon footprint.<br />
In replacement of classical fillers to improve the mechanical<br />
properties. Particle Size Distribution d 97: 90 µm, Particle Size<br />
Distribution d 50: 7 µm.<br />
Monomers DAISO DAP ® Daiso Diallylphthalate monomers, cross-linking agents for unsaturated<br />
polyester and insulating varnish as replacement for<br />
styrene monomer.<br />
3
hydroCArbon resins<br />
4<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
C9-alkyl aromatic<br />
resins<br />
plAstiCizers<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
Phthalates Jayflex TM DIDP<br />
Jayflex TM DINP<br />
LF Serie Resinall Rütgers<br />
Resins<br />
AD Serie,<br />
NL Serie<br />
Resinall Rütgers<br />
Resins<br />
ExxonMobil<br />
Chemical<br />
Jayflex TM DIUP ExxonMobil<br />
Chemical<br />
Jayflex TM DTDP ExxonMobil<br />
Chemical<br />
Plasticizer oils Paganini Q8 Kuwait<br />
Petroleum<br />
Puccini Q8 Kuwait<br />
Petroleum<br />
RUBBER<br />
Copolymer resins, alkylaromatic/cycloaliphatic resins. Necirès<br />
LF resins are used in inks, coatings, adhesives, rubber, concrete<br />
curing and foundry applications.<br />
Aromatic, chemically inert, and non-saponifiable C9 resins,<br />
promoting filler wetting and viscosity control, along with tack<br />
and adhesion; in adhesives (suitable for solventbased, pressuresensitive<br />
and hot-melt adhesives) and caulks to improve<br />
tack and bond strength; and in rubber compounds as a processing<br />
aid.<br />
Diisononyl-Phthalate and Diisodecyl-Phthalat are high molecular<br />
weight standard plasticizers on phthalate basis; DINP<br />
and DIDP are applied to improve the processibility of NR, bR,<br />
SbR, NbR, CR, ECO, ACM and AEM. Due to the branching of<br />
the alcohol chains DINP and DIDP provide a high migration<br />
resistance und a low volatility.<br />
Diisoundecyl-Phthalate is a high molecular weight special<br />
plasticizer on phthalate basis. Due to its low fogging values<br />
and high migration resistance DIUP is used in automotive applications,<br />
e.g. car interior. DIUP can be applied in NR, bR,<br />
SbR, NbR, CR, ECO, ACM and AEM.<br />
Ditridecyl-Phthalate is a very high molecular weight special<br />
plasticizer on phthalate basis. Due to its very high molecular<br />
weight und the outstanding low volatility DTDP is recommended<br />
for high temperature applications, such as high-voltage<br />
cables and for parts inside or close to the engine.<br />
Paganini Oils (370P – 4500P) are paraffinic Group I oils (processing<br />
oils) without labeling obligation and a high content of<br />
aromatic hydrocarbons. The main applications are in the rubber,<br />
paint and plastic industry. benefits: low ash content, low<br />
aniline point, low asphalt content and a low loss of vaporization.<br />
Puccini Oils (4P – 475P) are paraffinic Group I oils (processing<br />
oils) with the main application in the rubber and printing inks<br />
industry. benefits: Core cuts with low sulphur contents<br />
(< 0,3%), color fastness, bright color, minimal vaporization<br />
loss when heated, low contents of aromatics and good oxidation<br />
stability.
synthetiC rubber<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
ACSM (chlorosulfonated<br />
polyethylene)<br />
RUBBER<br />
extos ® Tosoh ACSM based on alkylated polyethylene. Special elastomer<br />
with high resistance against oils and hot air and good weather<br />
resistance. Available are different grades: e.g. TS-530, TS-<br />
830, TS-430 which are different in viscosity and chlorine content.<br />
Applications: Fuel hoses, hydraulic hose systems, power<br />
steering hoses, cable covers a.o.<br />
bR (butadiene rubber) Kumho KbR Kumho<br />
Petrochemical<br />
CPE (chlorinated<br />
polyethylene<br />
CR (polychloroprene<br />
rubber)<br />
CSM (chlorosulfonated<br />
polyethylene)<br />
ECO (Epichlorhydrin<br />
rubber)<br />
beside SbR is butadiene rubber (bR) the second largest<br />
volume synthetic rubber used. bR has an excellent elasticity<br />
and abrasion resistance. The major use of bR is in tires.<br />
Further application fields are technical rubber goods, golfballs<br />
and shoe soles.<br />
Dakren TM Daiso Dakren CPE in an elastomer with good resistance against<br />
ageing and agressive medias. These powdered material is<br />
mainly used as plasticizer in PVC, PE, AbS; elastomer outer<br />
layers of fuel hoses, turbocharger hoses and as covering for<br />
cables. The Dakren TM products (1035, 1035H, 1035UH etc.)<br />
are different in chlorine content and mooney viscosity.<br />
Skyprene ® Tosoh Skyprene CR is a synthetic rubber with extraordinary properties<br />
in case of resistance against weather conditions, oil and<br />
many aggressive chemicals. Additional CR has a very good<br />
resistance against mechanical usage and is flame-resistant.<br />
Applications: several usages in the automotive industry.<br />
TOSO-CSM ® Tosoh CSM based on HDPE. Elastomer with high resistance against<br />
oils and hot air, as well as good weather resistance. Available<br />
are several different grades: TS-530, TS-830, TS-430 etc. who<br />
are different in viscosity and chlorine content. Application:<br />
Fuel hoses, hydraulic hose systems, power steering hoses,<br />
cable covers a.o.<br />
EPICHLOMER ® Daiso ECO has a balanced heat-, oil-, low temperature- and ozone<br />
resistance. Therefore it is used in fuel systems, membranes<br />
and engine hoses. Further applications are copy-rolls and<br />
membranes who require special flexibility in low temperature<br />
areas.<br />
EPDM Esprene EPDM Sumitomo<br />
Chemical Co.<br />
FKM<br />
(Fluoroelastomer)<br />
LSR (Liquid Silicone<br />
Rubber)<br />
SbR (Styrol butadiene<br />
rubber)<br />
SbR (Styrol butadiene<br />
rubber)<br />
FKM<br />
(Fluoroelastomer)<br />
Shanghai 3F New<br />
Material Co.<br />
EPDM is used in the automotive, construction and electronic<br />
industry and for technical rubber goods. It has an excellent<br />
resistance against UV radiation, ozone, heat and humidity and<br />
it is mostly resistance against acid and bases. EPDM has also<br />
a good durability and a very high elasticity (temperature range<br />
-40° C to +120° C).<br />
Available are: VDF-HFP Copolymer (FE2601), VDF-HFP-<br />
TFE Terpolymer (FE2462, FE2463), TFE Propene Copolymer<br />
(FE2701), Precompound (FE2651), Fluorosilicone elastomer<br />
(FE2801, FE2802, FE2803); benefits: Excellent heat, chemical<br />
resistance; resistant to nearly all inorganic/organic chemicals.<br />
Silastic ® Dow Corning Silastic ® and RbL ® are Liquid Silicone Rubbers which cure<br />
by polyaddition. The products are always delivered with Part<br />
A and b, which are mostly used in a 1:1 ratio.<br />
Kumho SbR Kumho<br />
Petrochemical<br />
Kumho SOL Kumho<br />
Petrochemical<br />
Styrene-butadiene-Rubber (SbR) is the most widely used<br />
synthetic rubber and is applicable in many different fields.<br />
It is primarily used for the production of tires, flooring, conveyor<br />
belts, shoe soles, seals and and has a good heat stability,<br />
abrasion and ageing resistance.<br />
Solution SbR (S-SbR) is mainly used for treads of environmentally<br />
friendly tires (Green Tire). S-SbR in combination with<br />
silica reduced the rolling resistance which has a positive effect<br />
on the fuel consumption and the CO 2 emission. Furthermore,<br />
the durability as well as the wet traction improved.<br />
5
proCessing Agents<br />
6<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
Mould Cleaners Frekote ®<br />
Reiniger<br />
RUBBER<br />
Henkel Mold cleaner for removing residues of release agents, finger<br />
prints and waxes. These products are used at a temperature of<br />
20-40°C.<br />
Mould Release Agents Frekote ® Henkel Solvent based semi-permanent release agent with a high<br />
thermal stability for multi releases of advanced composites<br />
(Epoxy systems, Polyester, Vinyl ester) as well as rotational<br />
molding. Depending on the product a matt finish, satin finish<br />
or gloss finish of the molded part is possible.<br />
Frekote ®<br />
Aqualine ® C<br />
Frekote ®<br />
Aqualine ® R<br />
Henkel Water based semi-permanent release agents with a thermal<br />
stability up to 315°C for multiple releases of advanced composites<br />
(Epoxy systems, Polyester, Vinyl ester). The Frekote ®<br />
Aqualine ® C Products are applied at room temperature and<br />
cure fast at a temperature.<br />
Henkel Water based semi-permanent release agents for multiple releases<br />
of rubber parts. The Frekote ® Aqualine ® R Products have a<br />
thermal stability up to 315°C to 400°C after curing. There is no<br />
contamination of the molded part during the molding process.<br />
Frekote ® HMT Henkel Solvent based release agent for multiple releases of rubber<br />
parts. These products are especially for application on hot<br />
molds > 60°C. The Frekote ® HMT-2 is less moisture sensitive.<br />
Frekote ®<br />
PUR-100<br />
Mould Sealers Frekote ®<br />
Versiegler<br />
pigments<br />
Henkel PUR-100 is a semi-permanent, water based release agent for<br />
multiple releases of PU parts. Molded parts can be painted or<br />
bonded without any post-finishing steps.<br />
Sipiol ® CS Henkel Tenside based release agent with corrision inhibiting effect and<br />
high thermal stability for release of rubber parts.<br />
Henkel Mold sealers which are easy to apply to seal new molds and<br />
older molds with micro porosity and light surface blemishes.<br />
These products enhance the release advantages of Frekote products.<br />
pRodUct gRoUp pRodUct NAME pRodUcER pRodUct dEscRiptioN<br />
Color Masterbatches LPX Color<br />
Masterbatches<br />
Dow Corning The LPX Color Masterbatches for Liquid Silicone Rubber<br />
consist of heat stable, cadmium free pigments, dispersed in<br />
cross-linkable fluid. Normal addition levels are 1 – 2%.
Any information given on the chemical and physical characteristics of our products, including technical advice on applications whether<br />
verbally, in writing, or by testing the product, is given to the best of our knowledge. However, this information is given without obligation<br />
and does not exempt the buyer from carrying out own investigations and tests in order to ascertain the product’s specific suitability for<br />
the purpose intended. The buyer is solely responsible for the application, utilization, and processing of the products, and must observe<br />
the laws and government regulations and the consequential rights of any third party. Our Conditions of Sale apply at all times. Our product<br />
lists include dangerous goods. The correct marking of such goods is described in the respective datasheets.<br />
Synthetic rubber, additives and auxiliaries for the<br />
production of rubber compounds for technical<br />
rubber products (e.g. sealants, moulded articles,<br />
hoses).<br />
7
www.krahn.de<br />
[ bRING IT TOGETHER ]<br />
KRAHN CHEMIE <strong>GmbH</strong> | Grimm 10 | 20457 Hamburg | Tel +49 40 320 92-0 | Fax +49 40 320 92-322 | www.krahn.de | info@krahn.de<br />
09/2012 | Title, 3rd picture lefthand view: IFAM/Technology Review