Micro Sagittal Saw Blades

SMALL 

BONE 

POWER 

PRODUCTS 

HALL SURGICAL 

® SURGICAL 

CATALOG 

SMALL BONE POWER PRODUCTS

Ordering Information ................................................................... J.2 

Product Support ........................................................................... J.3 

Product Support and Service Programs ......................................... J.4 

Service Programs .......................................................................... J.5 

Return/Repair Information ........................................................... J.6 

Consoles....................................................................................... J.7 

MicroChoice ® Handpieces, Guards and Attachments............. J.8 - J.9 

MicroChoice Attachments .......................................................... J.10 

PowerPro ® Handpieces and Attachments.................................... J.11 

PowerPro Attachments .............................................................. J.12 

Mini-Driver Handpieces, Guards and Attachments.................... J.13 

Mini-Driver Attachments ........................................................... J.14 

Micro100 Handpieces, Guards and Attachments........................J.15 

Micro100 Handpieces and Guards .............................................. J.16 

Micro-Driver Handpieces, Guards and Attachments.................. J.17 

C-Serter ® Handpieces, Guards and Attachments ......................... J.18 

Staplizer ® Handpiece and Attachments ....................................... J.19 

Staplizer Accessories ................................................................... J.20 

Small Bone Accessories ..................................................... J.21- J.28 

Small Bone Irrigation Accessories ...................................... J.29 - J.31 

Micro Burs ........................................................................ J.32 - J.44 

Micro Sagittal Saw Blades ................................................. J.45 - J.57 

Micro Sagittal and Oscillating Saw Blades........................... J.58, J.59 

Micro Oscillating Saw Blades............................................. J.60 - J.66 

Micro Reciprocating Saw Blades........................................ J.67 - J.70 

Bone Fixation Wires.................................................................... J.71 

Staplizer ® Staples ................................................................ J.72, J.73 

Numerical Index................................................................ J.75 - J.84 

Alphabetical Index ............................................................ J.85 - J.94 

CONTENTS 

Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540 SMALL BONE POWER PRODUCTS, J.1

Terms 

Linvatec Corporation’s standard terms are net thirty (30) days, F.O.B. 

shipping point, unless otherwise approved in writing by Linvatec. All orders 

and transactions are subject to the laws of the state of Florida. 

To Place Your Order 

Please provide a purchase order number, billing and shipping instructions, 

terms, product catalog number and description, quantity and pricing to one 

of the following: 

Your Sales Representative 

Customer Service (Within U.S.) 

Phone: 800-237-0169 

Fax: 727-399-5256 

E-mail: cust_serv@linvatec.com 

Customer Service (Outside U.S.) 

Phone: 727-392-6464 

Fax: 727-397-4540 

E-mail: cust_serv@linvatec.com 

Linvatec Corporation 

Attn: Customer Service 

11311 Concept Boulevard 

Largo, FL 33773-4908 USA 

Ordering Information 

True Purchasing Flexibility 

Linvatec Financial Services offers a variety of flexible financing programs from 

leases to procedure fees to delayed payment plans. Ask your Sales Representative 

for more information on how you can acquire the latest technology through 

a financing program that fits your unique budgetary requirements. 

Rental Kits 

In every O.R., there are times when you have to schedule a case but do not 

have the equipment needed. Either the capital funding for the equipment 

has yet to be approved or you have been unable to justify the cost of the 

equipment due to the procedure’s low volume. 

For these situations, Linvatec offers a rental program for procedure-specific 

Instruments and powered equipment. One toll free phone call, to Linvatec 

Rentals at 888-587-9742, and everything that you need for the case is on its way. 

To enroll in a rental program contact your Sales Representative. Your 

representative will help you customize the kits to fit your procedural 

requirements. After the case, simply return the Instruments sterilized, if 

appropriate, along with any disposables you did not use. You will be billed 

only for the rental fee and for the disposables not returned. 

J.2, SMALL BONE POWER PRODUCTS . . . . . . . . . . . . .Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 813.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540

At Linvatec Corporation, we want to offer more than a quality product. We 

take pride in being able to provide you with value added services to support 

our products. The information given in this catalog is designed to address 

your questions regarding product support. 

Customer Support 

If you encounter a problem or need technical assistance, contact Customer 

Service or your Sales Representative. Refer to the Customer Service 

telephone numbers listed. 

Regulatory Compliance 

Report any injuries or malfunctions to Linvatec Customer Service. Refer to 

the Customer Service telephone numbers listed. 

Original Warranty 

Linvatec Corporation (“the Company”) warrants to the first purchaser or 

lessee (“Customer”) that the Instruments, attachments and parts 

manufactured by or for the Company (hereinafter collectively “Instruments”) 

have been tested, inspected, and shipped in proper working order. 

The Company warrants all new Instruments to be free from defects in materials 

and workmanship for the following periods, measured from date of sale: 

Original Warranties 

Powered Surgical Instruments ..................................... 12 Months 

PowerPro ® Attachments.............................................. 12 Months 

Burs/Burrs and Blades ............................................. Upon Receipt 

Handpiece Cords and Power Cords............................... 6 Months 

Pneumatic hoses........................................................... 6 Months 

Bur guards, blade guards, attachments ......................... 6 Months 

Battery Packs ................................................................ 3 Months 

Battery Chargers ......................................................... 12 Months 

Skull Perforators ........................................................... 6 Months 

Camera Consoles........................................................ 12 Months 

Video Components..................................................... 12 Months 

Video Cables and Light Guides ..................................... 3 Months 

Non-autoclavable Camera heads ................................ 12 Months 

Envision 1 /4” Autoclavable Camera Heads ................ 500 uses or 

12months, whichever comes first 

Envision Autoclavable 3CCD Camera Heads ............... 12 months 

Shutt Non SLG Instruments ........................................ 12 Months 

Footswitches............................................................... 12 Months 

Irrigation Systems (pump and sensor) ......................... 12 Months 

Reusable Procedure Specific Instruments..................... 12 Months 

Product Support 

Following the Original Warranty, Linvatec offers additional warranty and 

service programs that support our products throughout their lifetime. Service 

programs address the necessity to control cost and greatly reduce repair 

turnaround time by eliminating the need for repair quotes. Products not 

covered under a service program are subject to variable repair charges that 

typically result in significantly higher repair costs. To find out which service 

option best meets your needs, contact your local Sales Representative. 

Service Agreements 

Service Agreements provide additional warranty coverage on capital 

equipment. This additional warranty period covers all repair costs, provides 

for free loaner usage (upon availability) during repair time and covers freight 

charges out from Linvatec both on the loaner product and the repaired 

Instrument. You are responsible for the freight charges in for both the 

Instrument needing repair and the return shipment of the loaner. Options 

are available that allow for purchasing one (1) year or two (2) year 

additional warranty coverage. 

Service Warranty 

At the end of the Original or Service Agreement period, Instruments may 

still be returned to Linvatec for repair at the Customer’s expense. Linvatec 

warrants that any service or repair work performed by Linvatec shall be free 

from defects in workmanship and materials for a period of 90 days after the 

date the Customer receives the Instrument(s). This limited warranty applies 

only to the actual service or repair work performed by Linvatec authorized 

service centers. Linvatec warrants that all parts and assemblies used in the 

repair or service of Instruments meet new part functional specifications, 

although some parts or assemblies may have been remanufactured. 

Linvatec components are manufactured to exacting tolerances and design 

specifications. As a standard practice, all repairs are subject to strict product 

performance and testing specifications prior to returning the Instrument to 

the Customer. Linvatec ensures that each Instrument is inspected according 

to the guidelines used for new manufactured Instruments. If an Instrument is 

determined unrepairable, Linvatec will offer to sell to the Customer a 

refurbished or brand new Instrument or comparable equivalent to the 

Customer at a preferential price. All parts and assemblies replaced by 

Linvatec shall become the property of Linvatec 

Repair Quotes 

Repair quotes needed on products not covered by a warranty should be 

requested when calling Customer Service to initiate an RG (refer to 

Return/Repair section). If a quote is not requested, the repair will be 

processed and your account billed accordingly provided the repair is not 

covered under warranty. 

Minimum Service Charge 

There is a minimum repair charge of $100 (except for products covered 

under warranty). This charge applies to the evaluation and testing 

completed on the Instrument. 


Warranty Terms 

Product Support and 

Service Programs 

If the Customer discovers within the warranty period (original or Service 

Agreement) that an Instrument has a defect in materials and/or 

workmanship, the customer must promptly notify the Company. Also, if the 

Customer discovers within the service warranty period that any service or 

repair work performed by Linvatec has a defect in workmanship and/or 

materials, the customer must promptly notify the Company. If it becomes 

necessary to return the Instrument to the Company, the Customer must (a) 

acquire a “Returned Goods” authorization from the Company Customer 

Service Department, (b) pack the unit carefully, and (c) return it to the 

Company via air freight, prepaid. 

Within a reasonable time after receipt of the Instrument, the Company will 

investigate and correct any defect covered by warranty by providing, at its 

option, one of the following: service or repair of the Instrument, a 

replacement of the Instrument, or a refund of the purchase price of the 

Instrument. All parts and assemblies replaced by Linvatec shall become the 

property of Linvatec. These remedies are the Customer’s exclusive remedies 

under the warranty. 

The foregoing limited warranties do not apply to: 

• Instruments that have been tampered with, altered, abused, neglected, 

or misused. 

• Instruments damaged through use with other than Company authorized 

accessories, attachments, burs or blades. 

• Instruments not manufactured by or for the Company. 

• Instruments used for purposes other than those for which they were 

designed and manufactured, including use in any way inconsistent with 

the instructions and warnings contained in the Company instruction 

manuals and package inserts. 

• Instruments that were last serviced, refurbished, reprocessed or 

reconditioned by a nonauthorized service entity. 

THE FOREGOING LIMITED WARRANTIES ARE IN LIEU OF ALL 

OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT 

NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

In no case shall the Company be liable for any special, incidental or 

consequential damages based upon breach of warranty or any other legal 

theory. Some jurisdictions do not allow limits on warranties, or on remedies, 

and, in such jurisdictions, the limits in this and the preceding paragraphs may 

not apply. 

The Company reserves the right (a) to make design changes to Instruments at 

any time without notice to Customer and without incurring any obligation to 

incorporate those changes into Instruments previously purchased or leased, and 

(b) to make changes from time to time in the contents of any publication, 

instruction manual or package insert without any obligation to notify 

Customers of such revisions or changes, and (c) to change price without notice. 

Additional Service Programs 

R.A.P.I.D. 

Linvatec’s R.A.P.I.D. (Replacement Arthroscope/Endoscope with Priority for 

Immediate Delivery) program is designed to minimize downtime and 

inconvenience when a Linvatec reusable scope is damaged. Linvatec will 

replace reusable scopes covered under this program on an exchange basis, 

via overnight delivery, subject to availability. 

RAPID Program Guidelines: 

1. Linvatec will replace the damaged scope via overnight shipment (subject 

to availability) with a model of equal quality. Linvatec Customer Service 

must receive the request prior to 4:30 p.m. EST for next business day 

delivery. A customer purchase order is required. 

2. An invoice up to list price will be issued. It is your responsibility to return 

the damaged scope to Linvatec within fifteen (15) working days. The 

returned scope will be evaluated and, if repairable, a credit will be issued 

for the salvage value (as determined by Linvatec) of the damaged scope. 

3. If the damaged scope cannot be refurbished, credit will not be issued and 

you will be notified. 

4. Linvatec reserves the right, from time to time, to modify the list of scopes 

being covered under this program. 

For additional information, contact your Sales Representative or Linvatec 

Customer Service at 800-237-0169. 

Advance Payment R.A.P.I.D. 

Linvatec’s Advance Payment RAPID (Replacement Arthroscope/Endoscope 

with Priority for Immediate Delivery) program is designed like the RAPID 

program, but is intended to capitate scope repair costs. Under the program, 

customers will pre-pay a fee based on the number of their Linvatec scopes. 

Linvatec will replace damaged scopes up to four (4) times [the number of 

scopes covered under the agreement per year]. 

Advanced Payment RAPID Guidelines 

1. Customer must sign an agreement for one (1), two (2), or three (3) years. 

2. Upon signing the agreement, an invoice will be issued for the amount of 

the agreement. 

3. Linvatec will replace the damaged scope via overnight shipment (subject 

to availability) with a model of equal quality. Linvatec Customer Service 

must receive the request prior to 4:30 p.m. EST for next business day 

delivery. A customer purchase order is required. 

4. A zero-dollar invoice will be issued. It is your responsibility to return the 

damaged scope to Linvatec within ten (10) working days. 

5. If the damaged scope is not received within ten (10) working days, you 

will be invoiced $1,500.00, which is not refundable. 

6. This program does not currently cover 1.9mm small joint scopes. Linvatec 

reserves the right, from time to time, to modify the list of scopes being 

covered under this program. 


Envision Flat Rate R.A.P.I.D. Repair 

Linvatec’s Envision Flat Rate Repair program is an alternative to the standard 

R.A.P.I.D. program. Our Flat Rate program is designed for hospitals that still 

require a 24-hour placement but want a price cap on repair costs. 

For a flat rate, Linvatec will provide a replacement scope within 24 hours. 

This program keeps scope repair simple and convenient. 

Program Guidelines: 

1. Customer will sign an agreement stating they will use the Linvatec Flat 

Rate program and agree to have scopes only serviced by a Linvatec 

authorized repair facility. 

2. Linvatec will replace the damaged scope with a model number of equal 

quality using next business day delivery service. To ensure next business 

day delivery, Linvatec Customer Service must receive the request by 4:30 

p.m. EST. A Customer purchase order is required. 

3. An invoice at up to list price will be issued. It is your responsibility to 

return the damaged scope to Linvatec within fifteen (15) working days for 

evaluation. The returned scope will be evaluated and a credit will be 

issued (the difference between the invoiced price and the flat rate repair 

price). 

4. If the scope has been previously repaired by a facility other than an 

authorized Linvatec repair center, the warranty will be void and a credit 

will not be issued. 

For additional information, call your Sales Representative or Customer 

Service at 800-237-0169. 

Clear Repair 

Pay-For-Service Repair Program for Damaged Arthroscopes /Endoscopes 

Linvatec’s Clear Repair program is another alternative to our R.A.P.I.D. 

program. With Clear Repair, you will receive the same scope after it is 

repaired to its original specifications. All repairs are warranted in accordance 

with our service warranty period (refer to section Service Warranty Period). 

Processing a Clear Repair: 

1. Call your Linvatec Sales Representative or Customer Service to obtain a 

Return Goods number for a repair through the Clear Repair program. 

When you are issued your RG number, you will be advised of the location 

where to send your Instrument. 

2. Mail the damaged scope in a shipping carton provided by your 

Sales Representative. 

3. The Linvatec Repair Coordinator will present you with a quote within 24 

hours of receiving the damaged scope: 

• The repair quote is based on the repair required. Prices are estimates only. 

• Approval of the repair quote is required. 

Service Programs 

4. If the scope is severely damaged, you may choose between a replacement 

through our R.A.P.I.D. program or having the scope repaired. 

5. If the scope cannot be repaired, a new or refurbished scope will be 

offered. 

6. The scope is returned to you within 5-10 working days of Customer 

approval. 

For additional information, contact your local Sales Representative or 

Linvatec Customer Service at 800-237-0169. 

Loaner Program 

Linvatec’s loaner program is designed to minimize downtime and 

inconvenience when an essential product needs off-site servicing. 

Loaners are available for most capital products. Loaners are available at no 

charge during the warranty period (includes both original and extended 

warranty) A nominal loaner charge is associated with products not covered 

by a warranty. 

Program guidelines: 

1. Linvatec will strive to send the same model number as your unit but 

reserves the right to send a different model. 

2. Loaners, if available, will be sent using next business day delivery service. 

To ensure next business day delivery, Linvatec Customer Service must 

receive all loaner requests prior to 5:30 p.m. EST. 

3. For warranted products, Linvatec will pay freight charges out (includes 

both the loaner unit and the repaired unit). You are responsible for freight 

charges in (includes both the unit needing repair and the return shipment 

of the loaner unit). 

4. A loaner unit will be considered delinquent if any of the following 

conditions are met: 

• If the loaner is not returned within fourteen (14) calender days after 

shipment of your repaired Instrument 

• If the loaner is not returned within seven calendar (7) days after your 

rejection of a quoted repair price 

• If your Instrument needing repair is not received at Linvatec within 

fourteen (14) calendar days of loaner shipment 

5. Linvatec reserves the right, at its sole discretion, to charge non-refundable late 

fees and/or to charge up to full list price for any loaner product which is not 

returned on time or which is damaged due to customer misuse or negligence. 

6. Linvatec reserves the right to ask cash-in-advance and credit card 

customers to pay the standard repair charges and loaner fees (if 

applicable) prior to shipping a loaner. 


Procedure for Returns/Repairs 

1. All Instruments must be cleaned and sterilized, if appropriate, prior to 

return of any Instrument to Linvatec. Instruments contaminated with 

biohazardous materials will be returned to you at your expense. 

2. An authorized Return Goods (R.G.) Number must be obtained prior to 

returning any Instrument for repair/return. 

3. To return a product for repair, contact Linvatec Customer Service. The 

following information is needed to process a repair/return: 

• Catalog Number 

• Serial/Lot Number (if applicable) 

• Original Invoice Number 

• Detailed description of the problem or reason for return 

4. The R.G. number must be displayed on the outside of the box, included 

with all paperwork, and must be referred to when making an inquiry 

about the status of a repair/return. 

5. Linvatec maintains various repair centers around the world. When you are 

issued your R.G. number, you will be advised of the location where to 

send your product. 

Ship returns only to: 

Linvatec Corporation 

Attn. Return Goods Department 

11155 Concept Boulevard 

Largo, FL 33773-4908 USA 

Return Terms 

If it becomes necessary to return a product after purchase, the product must 

be returned within 45 days of ship date. Returns must be shipped prepaid 

freight. Returns that are not shipped prepaid freight will not be accepted. All 

product returns, except those attributable to a Linvatec error, are subject to a 

restocking fee of 15% of the purchase price or $25, whichever is greater. 

Products Not Eligible for Credit: 

• Sterile products/disposables returned with the outer packaging seals broken 

• Non-sterile products that have been sterilized and/or placed in the 

surgical field 

• Products damaged by customer misuse or negligence 

• Altered or customized products 

• Products purchased through a sales promotion 

• Products damaged in return transit due to inadequate packaging 

• Less than full packages – all products must be in original packaging 

• Obsolete products 

Return/Repair Information 

Products purchased under “True Purchasing Flexibility” or Linvatec Financial 

Services programs may have different return guidelines depending on the 

program selected. 

Packaging 

Whenever it is required to return your product, be sure to package it in a 

protective carton. We recommend that you save the original shipping 

container for this purpose. In-transit damage is not covered by the warranty; 

therefore, it is best to always insure shipments. 

Return Shipping 

All repaired products will be returned to you via second day air delivery 

unless you request an alternate shipping method. The cost of return shipping 

is your responsibility unless the product is under a warranty. 


Consoles 

Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 727.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540 SMALL BONE POWER PRODUCTS, J.7 

Cat. No. 

Advantage ® Console with Cord 115 Volt .......................................................... D3000 

Height 5 1 /8” (13cm), Width 17” (43.2cm), 

Depth 13” (35cm), Weight 19.5lbs (8.86kg) 

Advantage Console with Cord 230 Volt .......................................................... D3000I 

Height 5 1 /8” (13cm), Width 17” ( 43.2cm), 


Advantage Console with Cord 100 Volt .......................................................... D3000J 

Height 5 1 /8” (13cm), Width 17” ( 43.2cm), 


Operates: Advantage Shavers, Apex ® Shavers, PowerPro ® Electric Handpieces, MicroChoice ® 

Handpieces, Mini-Driver Handpiece and E9000 ® Handpieces 

E9000 ® Console with Cord 115 Volt.................................................................. E9000 

Height 4.63” (29.25cm), Width 11.75” (11.76cm), 

Depth 12.25” (31.11cm), Weight 15.4lbs (7.0kg) 

E9000 Console with Cord 230 Volt................................................................. E9000G 



E9000 Console with Cord 100 Volt .................................................................. E9000J 



Operates: Advantage Shavers, Apex Shavers, MicroChoice Handpieces, 

Mini-Driver Handpiece and E9000 Handpieces 

PowerPro ® Console, with Cord, 115 Volt ..................................................... PRO2000 


Depth 12.25” (31.11cm), Weight 17.3lbs. (7.847kg) 

PowerPro Console, with Cord, 230 Volt...................................................... PRO2000I 


Depth 12.25” (31.11cm), Weight 17.3lbs. (7.847kg) 

Operates: PowerPro Electric Handpieces, Apex Shavers, Advantage Shavers, MicroChoice 

Handpiece, and Mini-Driver Electric Handpiece. Includes AC Cord. 

3-Pedal Footswitch........................................................................................... C9863 

For use with Advantage, E9000 and PowerPro Consoles 

2-Pedal Footswitch...................................................................................... 5020-053 


Universal Handpiece Cord............................................................................. MC5057 


12’ (3.6m) 

Operates: MicroChoice, PowerPro, E9000 and MC Shaver Handpieces

MicroChoice ® Handpieces, 

Guards and Attachments 

J.8, SMALL BONE POWER PRODUCTS Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 813.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540 

Cat. No. 

MicroChoice Elite High Speed Drill............................................................. 5020-025 

Electric 

Stainless Steel and Aluminum 

Max Standard Operating Speed 100,000rpm 

Torque 2in-oz 

Weight 7oz (196g) 

For use with Advantage ® , E9000 ® and PowerPro ® Consoles 

MicroChoice Medium Speed Drill ................................................................ 5020-021 

Electric 


Max Standard Operating Speed 25,000rpm 

Torque 6in-oz 

Weight 7oz (196g) 

For use with Advantage, E9000 and PowerPro, Consoles 

MicroChoice Medium Bur Guard ................................................................. 5020-060 

Stainless Steel 

Use with 5091 Series Burs 

For use with 5020-025 and 5020-021 Handpieces 

MicroChoice Long Bur Guard ...................................................................... 5020-061 




MicroChoice Extra Long Bur Guard ............................................................. 5020-062 




MicroChoice Laminectomy Bur Guard ......................................................... 5020-067 


Use with 5092-203 Bur Only 


MicroChoice Tissue Retractor ...................................................................... 5020-068 

Stainless steel 

Use with 5092-236 Bur Only 


MicroChoice 20˚ Angle Attachment............................................................. 5020-063 



Use 1375-037 Spray Lubricant 

MicroChoice 20˚ X-Long Angle Attachment ............................................... 5020-064 




MicroChoice Bur Changer ........................................................................... 1375-003 

Plastic 

Used for Inserting Wire Pass Burs into 70º and 90º Angle Attachments. 

MicroChoice 70˚ Contra Angle Attachment ................................................. 5020-065 


Use with 5089 and 5090 Burs 



MicroChoice 90˚ Angle Attachment............................................................. 5020-066 


Use with 5089 and 5090 Burs 



MicroChoice Dental 70˚ Contra Angle Attachment ...................................... 5020-069 




Uses Friction Grip Burs Only. Not Available from Linvatec

MicroChoice ® Handpieces, 



Cat. No. 

MicroChoice Low Speed Drill....................................................................... 5020-026 

Electric 


Drill Head Maximum Speed 2,500rpm 

Screw/Tap Head Settings 4-30rpm 

Torque min. Drill Head 15in-oz 

Screw 25in-oz 

Tap Forward 55in-oz 

Tap Reverse 60in-oz 

Only Operational with Footswitch (5020-053 or C9863) 

For use with Advantage ® and E9000 ® Consoles 

MicroChoice Dental Implant Head............................................................... 5020-034 


Use with 5088 Dental Latch Burs 

For use with 5020-026 Handpieces 


MicroChoice Dental Implant Screw/Tap Head ..............................................5020-035 


Use with 5088 Dental Latch Burs 

For use with 5020-026 Handpieces 


MicroChoice Oscillating Saw ....................................................................... 5020-024 

Electric 


Standard Operating Speed 25,000cpm 

Stroke Arc 8º 

Weight 8.0oz (224g) 


MicroChoice Reciprocating Saw .................................................................. 5020-023 

Electric 


Standard Operating 17,000cpm 

Stroke 1 /10” (2.54mm) 



MicroChoice Sagittal Saw ............................................................................ 5020-022 

Electric 


Standard Operating Speed 20,000cpm 

Arc 4º 



Replacement Safety Slide............................................................................. 5020-057 

For MicroChoice Handpieces 

Replacement Handpiece Lever..................................................................... 5020-058 

For MicroChoice Handpieces

MicroChoice ® 

Attachments 


Cat. No. 

MicroChoice 1 /4” High Torque Jacobs Chuck Attachment ............................ 5020-042 


For use with 5020-027 Wiredriver Fixation Drill 

With Key 504499952 

MicroChoice 5 /32” High Torque Jacobs Chuck Attachment ........................... 5020-031 


With Key 504499953 


MicroChoice 1 /4” Jacobs Chuck Attachment ................................................ 5020-041 



With Key 504499952 

MicroChoice 5 /32” Jacobs Chuck Attachment ............................................... 5020-030 


With Key 504499953 


MicroChoice Universal Drill Attachment ...................................................... 5020-029 


Accepts AO/Trinkle Cutting Accessories 


MicroChoice Pin Driver................................................................................ 5020-032 



Accepts Steinman Pins (0.079-0.125”) 2mm-3.2mm Dia. 

No Lubricant needed 

MicroChoice Wiredriver Attachment............................................................ 5020-028 


Accepts Threaded or Unthreaded K-Wires from 

.028“ to .062“ (.7mm to 1.6mm) Dia. Wires 



All the above attachements are for use with the discontinued 

MicroChoice Fixation Drill, 5020-027

PowerPro ® Handpieces 

and Attachments 


Cat. No. 

PowerPro Electric II Modular Handpiece ...................................................... PRO6100 

Electric 

Modular Collet 


Variable Speed 0-1275rpm 

Weight 1.31lbs (610g) 

PowerPro Electrice II Pin Driver.................................................................... PRO6032 


Accepts Wires from 2.0mm (.078”) to 3.2mm (.125”) 

PowerPro Electrice II Wire Driver ................................................................. PRO6028 


Accepts Wires from .71mm (.028”) to 1.57mm (.062”) 

PowerPro 1 /4” Jacobs Chuck Attachment ..................................................... PRO2041 


5.1mm Cannulation 

PowerPro 1 /4” Keyless Chuck Attachment .................................................... PRO2250 



PowerPro 1 /8” Keyless Chuck Attachment.................................................... PRO6050 


2.0mm Cannulation

PowerPro ® Attachments 


Cat. No. 

PowerPro 5 /32” Jacobs Chuck Attachment .................................................... PRO2030 



PowerPro 1 /4” High Torque Jacobs Chuck Attachment ................................. PRO2042 



PowerPro Small AO Attachment.................................................................. PRO2038 



PowerPro Trinkle/AO Attachment ............................................................... PRO2029 



PowerPro Sagittal Saw................................................................................. PRO2043 


Uses 5023-xxx Hall ® Sagittal blades 

Wrenchless 

Blade Oscillation: 15,800cpm 

Stroke: 4º Arc

Mini-Driver Handpieces, 



Cat. No. 

Mini-Driver Electric Handpiece Cord, 15’............................................................M334 

For use with K500 Mini-Driver Electric Handpiece 

Mini-Driver Adapter ........................................................................................... K501 

For use with M334 Mini-Driver Handpiece Cord and E9000 ® , 

PowerPro ® and Advantage ® Consoles 

Mini-Driver......................................................................................................... K200 

Pneumatic 


Operating Pressure 90-110psi 

Max operating Speed 1200rpm 

Forward/Reverse 

Through Cannulation 4.0mm (0.156“) 


Mini-Driver/Micro-Driver Air Hose ................................................................... A201 

For use with U100 Micro-Driver Handpiece, 

K200 Mini-Driver Handpiece, Staplizer ® 

and Minos Handpieces 

Mini-Driver Sagittal Saw Attachment.................................................................. K120 


Blade Excursion Arc 8˚ 

For use with K200 Handpiece Only 

For use with Blades K121-K125 and K131-K136 Only 

Mini-Driver Small Jacob Chuck Attachment ........................................................ K110 


Jaw Cannulation 0-4.0mm (0-0.156“) – (0- 5 /32“) 

For use with K200 and K500 Handpieces 

With Key 504499953 

Mini-Driver 1 /4” Jacobs Chuck Attachment ......................................................... K109 


Jaw Cannulation 0-6.35mm (0-0.250“) 


With Key 504499952 

Mini-Driver 1 /4” High Torque Jacobs Chuck Attachment ..................................... K210 



Jaw Cannulation 0-6.35mm (0-0.250“) 

With Key 504499952

Mini-Driver Attachments 


Cat. No. 

Mini-Driver AO/ASIF Twist Drill Chuck Attachment ......................................... K114A 


Through Cannulation .126” (0-3.2mm) 


Mini-Driver Hudson Chuck Attachment.............................................................. K113 


Accepts Adapters with Hudson Fittings through Cannulation .057” (0-4.0mm) 


Mini-Driver Trinkle Attachment .......................................................................... K112 


Accepts Drill Bits 

Screwdrivers and Other Accessories with Quick Release Trinkle arbors 

Through Cannulation .157” (0-4.0mm) 


Mini-Driver Automatic Pin Driver Attachment .................................................... K211 


Accepts .065” to .0157” (1.64-4.0mm) 


Mini-Driver Automatic Wire Driver Attachment................................................ K111A 


Accepts .028” to .071” (0.7-1.8mm) Wire 


Mini-Driver Sagittal Saw Attachment.................................................................. K220 


Blade Oscillation 13,500cpm 

Blade Excursion Arc 6˚ 


Use with K141-K149 and K151-K156 

Requires use of 1365-005 Hex Wrench

Micro100 Handpieces, 



Cat. No. 

Surgairtome Two ® ........................................................................................ 5058-001 

Pneumatic 


Operating Pressure 100psi 

Operating Speed 95,000rpm 

Torque 1.75in-oz 


Micro100 Drill ............................................................................................. 5053-009 

Pneumatic 



Operating Speed 500-20,000rpm 

Torque 6in-oz 


Micro100 Medium Bur Guard...................................................................... 1375-012 


Overall Length 1.8” (4.57cm) 


For use with 5053-009, 5058-001 Drills 

Micro100 Long Bur Guard........................................................................... 1375-011 





Micro100 Cloward X-Long Bur Guard ......................................................... 1375-023 


Overall Length.3.7” (9.4cm) 



Micro100 Laminectomy Bur Guard.............................................................. 1375-020 



Use with 5092-203 Burs Only 


Micro100 Rhinoplasty Bur Guard................................................................. 1375-021 



Use with 5092-274 Burs Only 


Micro100 Tissue Retractor Guard ................................................................ 1387-022 



Use Only 5092 Series Long Burs which have a Diameter of 4.0mm or Less 

Recommend 5092-236 Burs 


Micro100 20˚ Angle Attachment ................................................................. 1375-032 





Micro100 20˚ X-Long Angle Attachment ..................................................... 1375-033 





Micro100 Contra Angle Attachment with Surgical Head.............................. 1375-035 


Use with 5089, 5090 Series Burs 


Micro100/Micro E ® 90˚ Angle Attachment................................................... 1375-036 


Use with 5089, 5090 Series Burs 


Use 1375-037 Spray Lubricant

Micro100 Handpieces 

and Guards 


Cat. No. 

Micro100/Micro E ® Contra Angle Attachment with Dental Head ................ 1375-034 




MicroChoice ® Bur Changer .......................................................................... 1375-003 

Plastic 

Used for Inserting Wire Pass Burs into 70º and 90º Angle Attachments. 

Micro100 Oscillating Saw............................................................................ 5053-012 

Pneumatic 



Operating Speed 22,000cpm 

Cutting Arc 7º 


Micro100 Oscillating Saw XL....................................................................... 5053-022 

Pneumatic 


Operating pressure 100psi 

Operating speed 22,000 cpm 

Cutting Arc 7º 


Micro100 Reciprocating Saw ....................................................................... 5053-010 

Pneumatic 




Stroke 0.1” 


Micro100 Sagittal Saw................................................................................. 5053-011 

Pneumatic 




Cutting arc 4º 


Requires use of 1365-005 Hex Wrench 

Hex Wrench .................................................................................................1365-005 


For use with 5057-040 Repeat Sternotomy Saw, 

5053-011 Sagittal Saw and 5053-012 Oscillating. Saw 

Micro 100 Wire Driver................................................................................. 5053-013 

Pneumatic 



Max. Operating Speed 1,000rpm 

Torque 30“ oz 

Weight 22oz 

Hall ® Wire Driver 100 Adapter Chuck .......................................................... 5053-019 

for use with 5053-013 Micro 100 Wire Driver 

Universal Hose, 10’ (3.05m) ........................................................................ 5052-010 

For Micro100 Handpieces, Series 4 ® Handpieces, Sternum Saw Handpiece, 

UltraPower ® Foot Control, Osteon Foot Control and Ototome Foot Control

Micro-Driver 

Handpieces, Guards and 

Attachments 


Cat. No. 

Micro-Driver ...................................................................................................... U100 

Pneumatic 



Torque 5in-oz 

Weight 3.25oz (92.1g) 

Micro-Driver Long Bur Guard............................................................................. U211 


For use with L Series Burs 

Use with U200 Micro Driver Drill Attachment 

Micro-Driver X-Long Bur Guard ......................................................................... U212 


For use with X Series Burs 

Use with U200 Micro Driver Drill Attachment 

Micro-Driver Drill Attachment ............................................................................ U200 


Integral Medium Bur Guard 

Variable Speed 0-28,000rpm 

Accepts Long Bur Guard (U211) 

Accepts X-Long Bur Guard (U212) 

Use with M Series Burs 

Micro-Driver Sagittal Saw Attachment ............................................................... U300 


Variable Speed 25,000 Oscillations per min 

Blade Arc 5-6˚ 

Eight Position Saw 

Use with U Series Blades 

Micro-Driver Oscillating Saw Attachment........................................................... U500 


Variable Speed 25,000 Oscillations per min 

Blade Arc 5-6˚ 



Micro-Driver Reciprocating Saw Attachment...................................................... U700 


Variable Speed 16,5000 Reciprocations per min 

Blade Stroke 1.73mm 



Mini-Driver/Micro-Driver Air Hose ................................................................... A201 

For use with U100 Micro-Driver Handpiece, 

K200 Mini-Driver Handpiece, Staplizer 

and Minos Handpieces

C-Serter ® Handpieces, 



Cat. No. 

C-Serter Handpiece ..................................................................................... 5050-020 

Battery 

Stainless Steel/Aluminum 

Operating Speed 600rpm 

Torque 11in-oz 

Wire Range .028-.062” (.7-1.57mm) 

Weight 12.57oz (356.5 g) without Battery 

Weight 21.33oz (605g) with Battery 

Use Only with C-Wires 

C-Serter Kit 100 to 120 VAC ....................................................................... 5050-010 

C-Serter Handpiece ................................................................................. 5050-020 

Introducer Sleeves (2 ea.) ...................................................................... 5050-021* 

Sterilizing Case ........................................................................................ 5050-026 

Power Pack ............................................................................................. 5050-028 

Transformer............................................................................................. 5050-031 

Battery Charger ....................................................................................... 5050-033 

Battery (2 ea.) ....................................................................................... 5050-035* 

Storage Case ........................................................................................... 5050-037 

C-Serter Kit 220 to 240 VAC ....................................................................... 5050-060 

Transformer 220 to 240 VAC................................................................... 5050-061 

*As order 1 per box 

Power Pack Original Handpiece................................................................... 5050-027

Staplizer ® Handpiece 

and Attachments 


Cat. No. 

Staplizer.............................................................................................................. T100 

Pneumatic 


Max Operating Pressure 90-110psi 

Weight 25.7oz, 731g 

Staplizer 7mm Carrier ......................................................................................... T107 


Accepts Cartridges Containing 7mm Bridge with Staples 

Staplizer 10mm Carrier ....................................................................................... T110 









Drill Guide 7mm ................................................................................................. T307 

Drill Guide 10mm ............................................................................................... T310 

Drill Guide 13mm ............................................................................................... T313 

Drill Guide 16mm ............................................................................................... T316

Staplizer ® Accessories 


Cat. No. 

Staple Pry ........................................................................................................... T121 

Staple Seater....................................................................................................... T122 

Width Gauge ...................................................................................................... T123 

Punch Disassembly Tool...................................................................................... T301 

Autoclave Case ....................................................................................................T210 

Anodized Aluminum 

Dimensions: 8.5 x 14.75 x 4.87” (21.59 x 37.465 x 12.37cm)

Small Bone Accessories 


Cat. No. 

AC Power Cord ........................................................................................... 5039-003 

1 /4” Jacobs Chuck Key............................................................................ 5044-999-52 


1/Box 

For use with 1 /4” Jacobs Chuck Attachment 

5 

/32” Jacobs Chuck Key........................................................................... 5044-999-53 


1/Box 

For use with 5 /32” Jacobs Chuck Attachment 

Micro100 Foot Control................................................................................ 1375-028 

Comes with 5053-074 Throttle Clip


Automatic Screwdrivers with Trinkle Fittings 


Cat. No. 

Screwdriver with Choice of One Bit.................................................................... D520 

Use with D521, D522 or D523 Bits 

Slotted Bit .......................................................................................................... D521 

Cruciate Bit ........................................................................................................ D522 

Phillips Bit........................................................................................................... D523 

Screwdriver with D525 Hex Bit........................................................................... D524 

Hex Bit ............................................................................................................... D525 

Twist Drill Bits Stainless Steel with Trinkle Fittings 

3.0mm (0.12”) Bit.............................................................................................. D471 

2.8mm (0.11”) Bit.............................................................................................. D472 

2.4mm (0.095”) Bit............................................................................................ D473 

3.45mm (0.136”) Bit.......................................................................................... D474 

4.5mm (0.178”) Bit............................................................................................ D475 

3.7mm (0.146”) Bit............................................................................................ D476 

3.2mm (0.127”) Bit............................................................................................ D477


Cat. No. 


For Micro100 Handpieces, Series 4 ® Handpieces, Sternum Saw Handpiece, 

Ultrapower ® Foot Control, Osteon Foot Control and Ototome Foot Control 


For Micro100 Handpiece, Series 4 Handpiece, Sternum Saw Handpiece, 

Osteon Foot Control and Ototome Foot Control 





Specail Order Only 



Extension Hose, 10’ (3.05m) ....................................................................... 5052-018 

Male Connector: Schrader 

Female Connector: Schrader 

Extension Hose, 10’ (3.05m) ....................................................................... 5052-029 

Male Connector: DISS 


Extension Hose, 15ft (4.57m) ...................................................................... 5052-030 



Extension Hose, 20ft (6.10m) ...................................................................... 5052-031 



20’ Hose..............................................................................................................A101 

For use with Minos , Mini-Driver , Micro-Driver and Staplizer ® Handpieces 

10’ Hose............................................................................................................. A201 

For use with Minos, Mini-Driver, Micro-Driver and Staplizer Handpieces 

Male Stryker to Female Schrader Adapter.......................................................... M321 


DISS to Schrader Adapter .................................................................................. M322 


Small Bone Accessories


J.24, SMALL BONE POWER PRODUCTS . . . . . . . . . . .Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 813.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540 

Cat. No. 

Hose Handler .............................................................................................. 5052-101 

Velcro 

Clip: Stainless Steel 

5/Box 

Pressure Tester............................................................................................. 2075-017 

Nitrogen Regulator, Single Outlet...................................................................... M207 

Replaces 1375-007 

Nitrogen Regulator, Dual Outlet........................................................................ M208 

Replaces 1375-030 

Schrader Coupler......................................................................................... 5144-002 

Connection: Female Schrader 

Y Connector .................................................................................................1375-040 

Connection: Male Schrader 

Dual Female Connection: Schrader



Cat. No. 

Universal Autoclave Case .................................................................................... E306 

Aluminum 

Dimensions: 8.5 x 14.75 x 4.87” (21.59 x 37.465 x 12.37cm) 

Autoclave Container.................................................................................... 5030-010 

Half Size 


Dimensions: 11 x 12 x 6” (27.94 x 30.48 x 15.24cm) 

Basket, Half Size .......................................................................................... 5030-011 



Autoclave Container.................................................................................... 5030-020 

Mid-Length 


Dimensions: 18 x 12 x 6” (45.72 x 30.48 x 15.24cm)



Cat. No. 

Basket, Mid-Length ..................................................................................... 5030-021 



Autoclave Case, Large ................................................................................. 1384-042 



Autoclave Case, Standard............................................................................ 5052-012 



Blue I.D. Labels............................................................................................ 5030-031 

Description: Hall ® Surgical 

For use with 5030-010 and 5030-020 

Disposable Filter .......................................................................................... 5037-033 

1000/Box 

For use with 5030-010 and 5030-020



Cat. No. 

Holding Clamp, Small .................................................................................. 5030-028 

Holding Clamp, Medium ............................................................................. 5030-029 

Holding Clamp, Large.................................................................................. 5030-030 


Sterile Container Accessory Kit .................................................................... 5030-040 

Includes: 

5030-025 25 Sterile Processing Cards 

5030-026 50 Tamper Evident Arrows 

5037-033 50 Disposable Filters 


Sterile Processing Cards ............................................................................... 5030-025 

500/Box 


Tamper Evident Arrows................................................................................ 5030-026 

500/Box 


Bur, Blade Cabinet ....................................................................................... 5052-400 

Labels for Bur, Blade Cabinet ................................................................ 22173470000 

Cleaning Brush ............................................................................................ 5053-124 

1/Box



Cat. No. 

Wire Guard.................................................................................................. 5053-123 

1/Box 

For use with 5020-027 Wiredriver Fixation Device 

and 5053-013 Micro100 Wiredriver 

Blitz ® II Surgical Instrument Cleaner and Lubricant .......................................... M105A 

Use only with Maxi-Driver , Mini-Driver , 

Micro-Driver , Staplizer ® and Minos Handpieces 

Instrument Lubricant ......................................................................................... M317 

Use only with Maxi-Driver Air, Mini-Driver Air, 

Micro-Driver , Staplizer ® and Minos Handpieces 

Hal ® l Instrument Lubricant........................................................................... 1365-016 

Use with Hall Angled Attachments 

Hall ® Surgical Attachment Lubricant ............................................................ 1375-037 

For use with Hall Surgical Angled Attachments 

Bur Brush Accessory .................................................................................... 1375-015 

Fluid Bag Support Rod................................................................................. 5040-180 

For use with 5040-039 and 5040-239 Hall Irrigation Pumps or E9000 ® 

and Advantage ® Consoles

Small Bone 

Irrigation Accessories 


Cat. No. 

Console Stand ............................................................................................. 5020-054 

Universal Hose Sensor ................................................................................. 5040-115 

Micro100 Drill and Surgairtome Two Instrument Clip, 2/Box ....................... 5040-112 

Micro100 Irrigation Tubing, 5/Box .............................................................. 5040-110 

Micro Medium Bur Guard Disposable Tip with Rod (Not shown) ................. 5040-150 

Micro E Irrigation Sensor ............................................................................. 5040-125 

Micro E Drill and Surgairtome Two Instrument Clip, 2/Box .......................... 5040-122 

Micro E Irrigation Tubing, 5/Box.................................................................. 5040-120 

Micro Medium Bur Guard Disposable Tip with Rod (Not shown) ................. 5040-150 

Reusable Micro100 /Micro E Sagittal Saw Tip ............................................. 5040-140 

Reusable Micro100/E Oscillating Saw Tip .................................................... 5040-141 

Reusable Micro100 Reciprocating Saw Tip................................................... 5040-142 

Reusable Micro E Reciprocating Saw Tip...................................................... 5040-143

Small Bone 



Cat. No. 

Reusable Irrigation Handpiece Clip .............................................................. 5040-130 

MicroChoice ® Reusable Medium Bur Irrigation Tip....................................... 5040-200 

MicroChoice Reusable External 70˚ and 90˚ Irrigation Tip............................. 5040-201 

MicroChoice Reusable Long Bur Irrigation Tip ............................................. 5040-202 

MicroChoice Reusable Internal 70˚ and 90˚ Irrigation Tip ..............................5040-203 

MicroChoice Reusable Sagittal Saw Irrigation Tip......................................... 5040-205 

MicroChoice Reusable Oscillating Saw Irrigation Tip.................................... 5040-206 

MicroChoice Reusable Reciprocating Saw Irrigation Tip ............................... 5040-207 

MicroChoice Reusable Extra Long Bur Irrigation Tip......................................5040-208 

MicroChoice Disposable Universal Irrigation Tip, 5/Box ............................... 5040-219 

MicroChoice Disposable Medium Bur Irrigation Tip ..................................... 5040-220 

MicroChoice Disposable Long Bur Irrigation Tip........................................... 5040-222 

MicroChoice Disposable Extra Long Bur Irrigation Tip...................................5040-228 

E9000 ® Tubing Set for MicroChoice Handpieces................................................ E9418 

Select Appropriate Tip/Clip to Match Handpiece and Attachment 

Reusable Irrigation Tubing ........................................................................... 5040-129 

For use with the 5040-039 and 5040-239 Pump Only 

Irrigation System I.V. Pole-Mount Kit........................................................... 5040-170

Small Bone 



Cat. No. 

Medium Bur Tip with Bending Rod.............................................................. 5040-150 

Long Bur Guard Tip with Bending Rod......................................................... 5040-151 

Laminectomy Bur Guard Tip ........................................................................ 5040-152 

20º Angle Tip with Bending Rod.................................................................. 5040-153 

Extra-Long 20º Angle Tip with Bending Rod................................................ 5040-154 

Reusable Medium Bur Tip with Bending Rod ............................................... 5040-155 

Reusable Long Bur Tip with Bending Rod .................................................... 5040-156 

Reusable 20º Angle Tip with Bending Rod ................................................... 5040-158 

Reusable Extra-Long 20º Angle Tip with Bending Rod ................................. 5040-159

Products not shown at actual size. 

Micro Burs 

For use with: 

MicroChoice ® High Speed Drill (5020-025) 

MicroChoice Medium Speed Drill (5020-021) 

Micro100 Drill (5053-009) 

Micro E ® Drill (5040-001) 

Surgitome E ® (5040-008) 

Surgairtome Two ® (5058-001) 


Cat. No. 

Micro Bur, Round, X-Long, 4 Flutes, 0.5mm, Carbide.................................. 5093-221 





Micro Bur, Round, X-Long, 10 Flutes, 5.0mm, Carbide................................ 5093-230 

Micro Bur, Round, X-Long, 10 Flutes, 6.5mm, Carbide................................ 5093-232 

Micro Bur, Oval, X-Long, 8 Flutes, 4.0 x 8.0mm, Carbide............................ 5093-236 

Micro Bur, Oval, X-Long, 8 Flutes, 5.5 x 10.0mm, Carbide.......................... 5093-238 

Micro Bur, Round, Diamond, X-Long, 140-170 Grit, 2.0mm ....................... 5093-260 




Micro Bur, Round, Heavy Grit Diamond,...................................................... 5093-282 

X-Long, 60-70 Grit, 2.0mm 



Micro Bur, Round, Heavy Grit Diamond, ..................................................... 5093-284 






Micro Bur, Round, Cylindrical, X-Long, 2 Flutes,.......................................... 5093-291 

3.0 x 4.0mm, Carbide M-8 Type 

X-Long Burs are used with: 

MicroChoice Micro100/Surgairtome Two/ 

Surgitome E 

Extra-Long 20° Extra-Long 20° 

Angle Attachment Angle Attachment 

5020-064 1375-033 

Extra-Long Bur Guard Extra-Long Cloward Bur Guard 

5020-062 1375-023 

5093-1XX = single pack, sterile 

5093-2XX = 5 per box, sterile 

U.S. Patent . D397,437


Special Order Only 






Cat. No. 

Micro Bur, Side-Cutting, Straight, Long, 6 Flutes, ....................................... 5092-203 + 

1.7 x 12.0mm, Carbide 

Micro Bur, Side-Cutting, Straight, Long, 6 Flutes, ........................................ 5092-204 


Micro Bur, Side-Cutting, Tapered, Long, 6 Flutes, ........................................ 5092-206 


Micro Bur, Side-Cutting, 5/Box, 1.6 x 43.7mm.......................................... 5092-212* 

Available only as sterile box of 5 

Micro Bur, Side-Cutting, Tapered, Long, 6 Flutes, ........................................ 5092-214 


Micro Bur, Tapered, Fissure, Long, 5/Box, 1.2 x 2.3mm, #701................... 5092-271* 






Micro Bur, Round, Long, 6 Flutes, 1.0mm, Carbide ..................................... 5092-220 





Micro Bur, Round, Long, 10 Flutes, 5.0mm, Carbide ................................... 5092-230 

Micro Bur, Round, Long, 10 Flutes, 6.5mm, Carbide ................................... 5092-232 

Micro Bur, Oval, Long, 8 Flutes, 4.0 x 8.0mm, Carbide ........................... 5092-236** 

Micro Bur, Oval, Long, 8 Flutes, 5.5 x 10.0mm, Carbide ............................. 5092-238 

Micro Bur, Wire Pass, Long, 2 Flutes,........................................................... 5092-247 

1.0 x 19.0mm, Steel 

Long Burs are used with: 

MicroChoice ® Drills Micro100 /Surgairtome Two ® / 

Surgitome E ® Drills 

20°Angle Attachment Angle Attachment 

5020-063 1375-032 

Long Bur Guard Long Bur Guard 

5020-061 1375-011 

+ May also be used with Laminectomy Bur Guard 

MicroChoice Micro 100/Surgairtome Two/ 

Surgitome E 

5020-067 1375-020 

**May also be used with Tissue Retractor Guard 

MicroChoice Micro 100/Surgairtome Two/ 

Surgitome E 

5020-068 1387-022 



*Not CE marked, may require additional delivery time




Cat. No. 

Micro Bur, Barrel, Long, 6 Flutes, 2.0 x 10.0mm, Carbide ............................ 5092-252 

Micro Bur, Barrel, Long, 6 Flutes, 4.0 x 10.0mm, Carbide ............................ 5092-254 

Micro Bur, Round, Diamond, Long, 140-170 Grit, 2.0mm ........................... 5092-260 

Micro Bur, Round, Diamond, Long, 140-170 Grit, 3.0mm ......................... 5092-262 




Micro Bur, Oval, Diamond, Long, 140-170 Grit, 4.0 x 8.0mm ..................... 5092-270 

Micro Bur, Rhinoplasty, Diamond,.............................................................. 5092-274* 

Long, 140-170 Grit, 2.0 x 19.0mm 


Long, 60-70 Grit, 2.0mm 









Micro Bur, Round Cylindrical, Long, 2 Flutes,............................................... 5092-291 


Micro Bur, Round Cylindrical, Long, 2 Flutes,............................................... 5092-292 

4.0mm, M-8 type 


MicroChoice ® Micro100 20°Angle Attachment Angle Attachment 

5020-063 1375-032 

Long Bur Guard Long Bur Guard 

5020-061 1375-011 



*May also be used with 1375-021 Rhinoplasty Bur Guard.

Cat. No. 

Micro Bur, Side-Cutting, Straight, Medium, 6 Flutes, ................................... 5091-201 





1.5x 7.5mm, Carbide 

Micro Bur, Side-Cutting, Tapered, Medium, 6 Flutes,................................... 5091-206 


Micro Bur, Side-Cutting, Lindemann, Medium, 4 Flutes,.............................. 5091-212 


Micro Bur, Tapered, Fissure, Medium, 1.2 x 2.3mm, #701 ......................... 5091-271* 

Micro Bur, Tapered, Fissure, Medium, 1.6 x 3.8mm, #702 ......................... 5091-272* 

Micro Bur, Tapered, Fissure, Medium, 2.1 x 4.9mm, #703 ........................... 5091-213 

Micro Bur, Tapered, Fissure, Medium,.......................................................... 5091-113 

2.1 x 4.9mm, #703 










1.6 x 4.3mm, Carbide, 

Micro Bur, Side-Cutting, Rounded End, Medium, 6 Flutes, .......................... 5091-219 

1.2 x 3.7mm, Carbide, 

Micro Bur, Round, Medium, 8 Flutes, 1.8mm, Carbide ................................ 5091-221 







Micro Bur, Round, Medium, 10 Flutes, 5.0mm, Carbide .............................. 5091-230 

Micro Bur, Round, Medium, 10 Flutes, 6.5mm, Carbide .............................. 5091-232 

Micro Bur, Oval, Medium, 8 Flutes, 4.0 x 8.0mm, Carbide .......................... 5091-236 

Micro Bur, Oval, Medium, 8 Flutes, 5.5 x 10.0mm, Carbide ........................ 5091-238 

Micro Bur, Swanson Reamer, Medium, 4 Flutes, 2.0mm, Steel..................... 5091-242 

Medium Burs are used with: 

MicroChoice ® Drills Micro100 /Surgairtome Two ® / 

Surgitome E ® 

Medium Bur Guard Medium Bur Guard 

5020-060 1375-012 



*Not CE marked, may require additional delivery time 






Products shown at actual size. 


;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ ;;;; @@@@ ÀÀÀÀ 





Cat. No. 




Micro Bur, Wire Pass, Medium, 2 Flutes, 1.0 x 19.0mm, Steel ..................... 5091-247 

Micro Bur, Wire Pass, Medium, 2 Flutes 1.5 x 19.0mm, Steel ...................... 5091-248 

Micro Bur, Wire Pass, Medium, 2 Flutes, 2.0 x 19.0mm, Steel ..................... 5091-249 

Micro Bur, Barrel, Medium, 6 Flutes 2.0 x 10.0mm, Carbide........................ 5091-252 

Micro Bur, Barrel, Medium, 6 Flutes, 4.0 x 10.0mm, Carbide....................... 5091-254 

Micro Bur, Round, Diamond, Medium, 140-170 Grit, 2.0mm...................... 5091-260 



Micro Bur, Oval, Diamond, Medium, 140-170 Grit, 4.0 x 8.0mm................ 5091-270 

Micro Bur, Dermabrader, Diamond, Medium, ........................................ 5091-080* ● 

80-100 Grit, 4.0 x 15.0mm, Straight 






80-100 Grit, 10.0 x 15.0mm, Tapered 


MicroChoice ® Micro100 /Surgairtome Two ® / 

Surgitome E ® 

Medium Bur Guard Medium Bur Guard 

5020-060 1375-012 



● = available only as single pack, non- sterile 

*Dermabrader Burs are for use only in MicroChoice 

Medium Speed Drill and Micro100 Drill.


Cat. No. 

Micro Bur, Side-Cutting, Straight, Extra-Short,............................................. 5089-208 

6 Flutes, 1.5 x 8.0mm, Carbide 

Micro Bur, Round, Extra-Short, 6 Flutes, 1.0mm, Carbide............................ 5089-220 

Micro Bur, Side-Cutting, Straight, Short, 6 Flutes,........................................ 5090-201 








Micro Bur, Side-Cutting, Tapered, Short, 6 Flutes,........................................ 5090-206 


Micro Bur, Round, Short, 6 Flutes, 1.0mm, Carbide ..................................... 5090-220 



Micro Bur, Wire Pass Drill, Short, 2 Flutes, ................................................... 5090-247 





2.0 x 19.0 mm, Steel 

Micro Bur, Round Cylindrical, Short, 2 Flutes, .............................................. 5090-291 

3.0 x 4.0mm, Carbide, M-8 type 

Micro Bur, Pilot Drill, Short, 1.0 x 7.0mm.................................................. 5090-170■ 

Micro Bur, Pilot Drill, Short, 1.0 x 10.0mm................................................ 5090-171■ 







Short and Extra-Short Burs are used with: 

MicroChoice ® Micro100 /Surgairtome Two ® 

/Surgitome E ® 

70°Contra-Angle 70°Contra-Angle 

Attachment Attachment 

5020-065 1375-035 

90°Angle Attachment 90°Angle Attachment 

5020-066 1375-036 



509X-1XX = single pack, sterile 

509X-2XX = 5 per box, sterile 

■ = available only as single pack, sterile 


Products shown at actual size.




Cat. No. 






Tapered Fissure Carbide Burs 

Micro Bur, Tapered Fissure, Short, 1.2 x 4.5mm........................................... 5090-211 

Micro Bur, Tapered Fissure, Short, 2.1 x 4.5mm,.......................................... 5090-213 

Micro Bur, Tapered Fissure, Short, 2.1 x 4.5mm, #703................................. 5090-113 

Short and Extra-Short Burs are used with: 

MicroChoice ® Micro100 /Surgairtome Two ® 

/Surgitome E ® 

70°Contra-Angle 70°Contra-Angle 

Attachment Attachment 

5020-065 1375-035 

90°Angle Attachment 90°Angle Attachment 

5020-066 1375-036 

509X-1XX = single pack, sterile 

509X-2XX = 5 per box, sterile 

■ = available only as single pack, sterile

For use with: 

MicroChoice ® Low Speed Drill (5020-026) 

Tapered Fissure Carbide Burs 


Cat. No. 

Micro Bur, Tapered, Fissure, 1.2 x 4.5mm, Carbide ...................................... 5088-211 

Micro Bur, Tapered, Fissure, 1.6 x 4.5mm, Carbide ...................................... 5088-213 

Round Carbide Dental Burs 

Micro Bur, Round, 2.1mm, Carbide ............................................................. 5088-224 

Micro Bur, Round, 3.1mm, Carbide ............................................................. 5088-226 

Stainless Steel Wirepass Drills 

MicroChoice, Wire Pass, 1.0 x 15.0mm ....................................................... 5088-242 

MicroChoice, Wire Pass, 1.5 x 15.0mm ....................................................... 5088-243 

Stainless Steel Pilot Drills 

MicroChoice, Pilot Drill, Dental, 1.0 x 7.0mm ........................................... 5088-170■ 

MicroChoice, Pilot Drill, Dental, 1.0 x 10.0mm ......................................... 5088-171■ 












Low Speed Drills and Burs are used with 5020-034 Dental 

Implant Drill Head and 5020-035 Dental Implant/Tap Head. 








For use with: 

Minos Air Drill (A300) 

Minos HS Air Drill (A200) 

Micro-Driver (U100) 


Cat. No. 

Micro-Driver and Minos, Bur, Round, X-Long, 6 Flutes, ................................... X20R■ 

2.0mm, Carbide 









Micro-Driver and Minos, Bur, Barrel, X-Long, 8 Flutes,..................................... X40B■ 


Micro-Driver and Minos, Bur, Barrel, X-Long, 8 Flutes,..................................... X55B■ 


Micro-Driver and Minos, Bur, Cone, X-Long, 8 Flutes,..................................... X45C■ 


Micro-Driver and Minos, Bur, Round, Diamond, X-Long, ................................ X10D■ 

1.0mm 


2.0mm 


3.0mm 


4.0mm 


5.0mm 

Extra-Long Burs are used with: 

Minos/Minos HS Micro-Driver 

Rand 20°Angle Extra-Long 

Attachment Bur Guard 

A245 U212 

Extra-Long Bur Guard 

A223 


For use with: 







Cat. No. 

Micro-Driver and Minos, Bur, Side-Cutting, Straight, Long, 6 Flutes, ................ L13S■ 


Micro-Driver and Minos, Bur, Side-Cutting, Straight, Long, 6 Flutes, ................ L17S■ 


Micro-Driver and Minos, Bur, Side-Cutting, Tapered, Long, 6 Flutes,................ L12T■ 


Micro-Driver and Minos, Bur, Side-Cutting, Tapered, Long, 5 Flutes,................ L20T■ 


Micro-Driver and Minos, Bur, Side-Cutting, Laminectomy, Long,...................... L17L■ 


Micro-Driver and Minos, Bur, Round, Long, 6 Flutes, ....................................... L10R■ 




















Micro-Driver and Minos, Bur, Barrel, Long, 8 Flutes,......................................... L40B■ 




20°Angle Attachment Long Bur Guard 

A235 U211 

Long Bur Guard 

A211 





Cat. No. 

Micro-Driver and Minos , Bur, Barrel, Long, 8 Flutes, ..................................... L55B■ 


Micro-Driver and Minos, Bur, Cone, Long, 12 Flutes,....................................... L45C■ 


Micro-Driver and Minos, Bur, Round, Diamond, Long, 1.0mm ........................ L10D■ 






Micro-Driver and Minos, Bur, Barrel, Oval, ...................................................... L4BD■ 

Diamond, Long, 4.0 x 10.0mm 



20°Angle Attachment Long Bur Guard 

A235 U211 

Long Bur Guard 

A211 

Minos Tissue 

Protector Bur Guard 

A222 (for L45C) 


For use with: 







Cat. No. 

Micro-Driver and Minos, Bur, Side-Cutting, Straight, Medium, ....................... M10S■ 










Micro-Driver and Minos, Bur, Side-Cutting, Tapered, Medium,....................... M10T■ 




Micro-Driver and Minos, Bur, Side-Cutting, Tapered, Medium, ...................... M15T■ 




Micro-Driver and Minos, Bur, Round, Medium, 6 Flutes, ................................ M15R■ 




















Micro-Driver and Minos, Bur, Barrel, Medium, 8 Flutes,.................................. M40B■ 




Medium Bur Guard Drill Attachment 

A212 U200 





Cat. No. 

Micro-Driver and Minos , Bur, Barrel, Medium, 8 Flutes, .............................. M55B■ 


Micro-Driver and Minos, Bur, Cone, Medium, 12 Flutes, ................................ M45C■ 


Micro-Driver and Minos, Bur, Round, Diamond, Medium, 2.0mm.................. M20D■ 



Micro-Driver and Minos, Bur, Wire Pass, Medium, 2 Flutes, .......................... M10W■ 

1.0 x 5.1mm, Stainless Steel 





Micro-Driver and Minos, Bur, Reamer, Medium, 4 Flutes, ............................... M20F■ 








Medium Bur Guard Drill Attachment 

A212 U200 


For use with: 

MicroChoice ® Sagittal Saw (5020-022) 

Micro100 Sagittal Saw (5053-011) 

Micro E ® Sagittal Saw (5040-002) 

Flat Blades 


Cat. No. 

Micro Blade, Sagittal, Fine, Radial, 9.5 x 25.5 x 0.4mm, .............................. 5023-218 


Micro Blade, Sagittal, Coarse, Flat, 19.5 x 25.5 x 0.4mm,............................ 5023-230 




Micro Blade, Sagittal, Coarse, Flat, 5.5 x 25.5 x 0.4mm,.............................. 5023-232 






Micro Blade, Sagittal, Coarse, Flat, 9.5 x 25.5 x 0.4mm,.............................. 5023-243 


Micro Blade, Sagittal, Fine, Flat, 5/Box, 4.0 x 6.0 X 0.4mm ....................... 5023-244* 


Micro Blade, Sagittal, Fine, Flat, 9.5 x 25.5 x 0.4mm, .................................. 5023-238 




*Not CE marked, may require additional delivery time 

Micro Sagittal Saw Blades 






Cat. No. 

Micro Blade, Sagittal, Fine, Flat, 4.5 x 25.5 x 0.4mm, ...................................5023-239 










Abraders 

Micro Blade, Abrader, Tip Diamond Coated, ............................................. 5023-055● 

25.0 x 6.3 x 3.8mm, Straight, Stainless Steel 

Micro Blade, 25° Angled, Abrader, Tip Diamond Coated,.......................... 5023-056● 

25.0 x 6.3 x 3.8mm, Medial, Stainless Steel 

Micro Blade, 70° Angled, Abrader, Tip Diamond Coated,.......................... 5023-057● 

25.0 x 6.3 x 3.8mm, Lateral, Stainless Steel 

Micro Blade, Sagittal, Fine, Flat, 10 x 18.5 x 0.4mm ................................. 5044-145◆ 



● = available only as single pack, non-sterile 

◆ = available only as box of 5, sterile

Angled Blades 


Cat. No. 

Micro Blade, 70˚ Angled, 9.5 x 7.5 x 0.6mm,............................................... 5023-228 

Radial, Stainless Steel 

Micro Blade, 70˚ Angled, 9.5 x 13.5 x 0.6mm,............................................. 5023-229 

Radial, Stainless Steel 

Micro Blade, 90˚ Angled, Coarse, 5.5 x 9.0 x 0.6mm, .................................. 5023-234 


Micro Blade, 45˚ Angled, Coarse, 5.5 x 18.0 x 0.6mm, ................................ 5023-235 


Micro Blade, 90˚ Angled, Coarse, 14.0 x 15.5 x 0.6mm, .............................. 5023-236 








Small Bone ACL Blades used with: 





Cat. No. 

Micro Blade, Small Bone ACL, 8.5 x 38.0 x 0.4mm ................................... 5023-186■ 

and Cutting Thickness 0.74mm, Stainless Steel 

Micro Blade, Small Bone ACL, 19.0 x 41.0 x 0.4mm ................................. 5023-282◆ 


Micro Blade, Small Bone ACL, 9.5 x 25.5 x 0.4mm ................................... 5023-283◆ 






Small Bone ACL Blade used with: 


Micro E Sagittal Saw (5040-002) 

Saw Blade, Hall, ACL/PCL, 9.5 x 25.5 x .4mm, ................................................... 8703 

8.0mm Depth Stop when used with Linvatec 

Patellar Tendon Graft Guides 

Small Bone ACL Blade used with: 


Micro E Sagittal Saw (5040-002) 

Versipower ® Oscillating Saw (5048-002) 

Series 3 ® Oscillating Saw (5044-002) 

Series 4 ® Oscillating Saw (5067-002) 

Saw Blade, ACL/PCL, 9.5 x 25.5 x .4mm,......................................................... C8902 

8.0mm Depth Stop when used with 

Linvatec Patellar Tendon Graft Guides 

Saw Blade, ACL/PCL, 8.0mm Depth Stop when ............................................ C8904◆ 

used with Patellar Tendon Graft Guides 

0.37 x 1.61 x 0.015 x 0.47 x 0.23”(9.4 x 40.9 x 0.38 x 12.0 x 0.6mm) 

Saw Blade, Freehand, ACL/PCL, 

8.0mm Depth Stop, 5/Box, Sterile,............................................................... C8803 

0.37 x 1.62 x 0.015 x 0.32 x 0.23” (9.4 x 41.2 x 0.38 x 8.0 x 0.6mm) 


8.0mm Depth Stop, 5/Box, Sterile,............................................................... C8804 

0.37 x 1.61 x 0.015 x 0.32 x 0.23” (9.4 x 40.9 x 0.38 x 8.0 x 0.6mm) 


10.0mm Depth Stop, 5/Box, Sterile,............................................................. C8806 

0.37 x 1.61 x 0.015 x 0.39 x 0.23” (9.4 x 40.9 x 0.38 x 10.0 x 0.6mm) 





For use with: 






Cat. No. 

Micro Blade, Graft Harvesting, 5.0mm, .................................................... 5023-405■ 

20.0mm Maximum Cutting Depth, 

0.4mm (0.016”) Material Thickness, Stainless Steel 

Micro Blade, Graft Harvesting, 6.0mm,..................................................... 5023-406■ 



MicroChoice, Blade, Graft Harvesting, 7.0mm, ........................................ 5023-407■ 



Micro Blade, Graft Harvesting, 8.0mm,..................................................... 5023-408■ 



MicroChoice, Blade, Graft Harvesting, 9.0mm, ......................................... 5023-409■ 



Micro Blade, Graft Harvesting, 10.0mm,................................................... 5023-410■ 














Graft Harvesting Blades 

16.5mm Blade Width 

5mm 

6mm 

7mm 

8mm 

9mm 

10mm 

11mm 

12mm 

13mm



For use with: 





Cat. No. 

Micro100/Micro E (Only), Blade, Sagittal, 9.5 x 25.5 x 0.4mm................. 5053-018● 

and Cut Thickness 0.6mm 

Micro100/E (Only), Blade, Sagittal, 19.5 x 25.5 x 0.4mm......................... 5053-030● 




Micro100/E (Only), Blade, Sagittal, 5.5 x 25.5 x 0.4mm........................... 5053-032● 


Micro100/E (Only), Blade, Sagittal, 14.0 x 41.0 x 0.4mm ........................ 5053-033● 




Micro100/E (Only), Blade, Sagittal, Fine, 9.5 x 25.5 x 0.4mm .................. 5053-038● 




● = available only as single pack, non-sterile


Cat. No. 

Micro100 /Micro E ® (Only), Blade, Sagittal, Fine,..................................... 5053-040● 

9.5 x 41.0 x 0.4mm and Cut Thickness 0.6mm 






Micro100/E (Only), Blade, Sagittal, 70° Angled, Fine,............................... 5053-028● 

9.5 x 7.5 x 0.6mm 


9.5 x 13.5 x 0.6mm 


5.5 x 9.0 x 0.6mm 


5.5 x 18.0 x 0.6mm 


14.0 x 15.5 x 0.6mm 






For use with: 

Micro-Driver (U100) and Sagittal Saw Attachment (U300) 

45° Angled Blades 


Cat. No. 

Micro-Driver, Blade, Sagittal, 45°Angled,......................................................... U330■ 

4.1 x 11.7 x 0.25mm (0.01“) and 0.51mm (0.02”) 


7.6 x 11.3 x 0.25mm (0.01”) and 0.51mm (0.02”) 


8.1 x 16.1 x 0.25mm (0.01”) and 0.51mm (0.02”) 


4.1 x 11.7 x 0.38mm (0.015”) and 0.65mm (0.026”) 


7.6 x 11.3 x 0.38mm (0.015”) and 0.65mm (0.026”) 


8.1 x 16.1 x 0.38mm (0.015”) and 0.65mm (0.026”) 

Bent Blades 

Micro-Driver, Blade, Sagittal, 15°Bend,............................................................ U333● 

8.1 x 4.8 x 0.25mm (0.01”) and 0.51mm (0.02”) 


6.9 x 5.1 x 0.25mm (0.01”) and 0.51mm (0.02”) 


12.7 x 13.5 x 0.25mm (0.01”) and 0.51mm (0.02”) 

Dimensions are: blade width x maximum cutting depth x blade thickness 

and cut thickness. 

■ = single pack, sterile 

● = single pack, non-sterile

Straight Blades 


Cat. No. 

Micro-Driver , Blade, Sagittal, Straight, ........................................................... U337■ 

12.7 x 29.2 x 0.25mm (0.01”) and 0.51mm (0.02”) 

Micro-Driver, Blade, Sagittal, Straight, ............................................................. U437■ 

12.7 x 29.2 x 0.38mm (0.015”) and 0.65mm (0.026”) 


9.5 x 25.5 x 0.38mm (0.015”) and 0.65mm (0.026”) 


5.6 x 27.2 x 0.38mm (0.015”) and 0.65mm (0.026”) 





20 mm 

25 

25 mm 

mm 

25 

mm 

20 mm 

15 mm 


20 

mm 

20 

mm 

15 mm 

15 

mm 

10 mm 

15 

mm 

10 mm 

10 

mm 

10 

mm 

5 mm 

5 mm 

5 

mm 

5 

mm


25 mm 

10 mm 

10 

mm 

10 

mm 


25 mm 

10 mm 

25 

mm 

10 mm 

25 mm 

10 mm 

20 mm 

5 

20 mm 

mm 

5 

mm 

5 

mm 

20 mm 

5 

mm 

20 

mm 

5 

mm 

20 mm 

5 

mm 

15 mm 

15 mm 

15 mm 

15 

mm 

15 mm 

10 mm 

10mm 

10 mm 

10 

mm 

10 mm 

5 

mm 

5 mm 

5 

mm 

5 

mm 

5 

mm 

For use with: 

Mini-Driver Sagittal Saw Attachment (K120) 

Can Only be use with K100 or K200 Handpiece 

Cat. No. 

Mini-Driver, Blade, Sagittal, Fine, ..................................................................... K121■ 

6.4 x 15.1 x 0.71mm (0.028”) and 0.89mm (0.035”) 


6.4 x 31.0 x 0.71mm (0.028”) and 0.89mm (0.035”) 


10.4 x 15.1 x 0.71mm (0.028”) and 0.89mm (0.035”) 


10.4 x 31.0 x 0.71mm (0.028”) and 0.89mm (0.035”) 


16.5 x 15.1 x 0.71mm (0.028”) and 0.89mm (0.035”) 


6.4 x 15.1 x 0.38mm (0.015”) and 0.56mm (0.022”) 


6.4 x 31.0 x 0.38mm (0.015”) and 0.56mm (0.022”) 

Mini-Driver, Blade, Sagittal, Fine, ................................................................. K133■ 

10.4 x 15.1 x 0.38mm (0.015”) and 0.56mm (0.022”) 


10.4 x 31.0 x 0.38mm (0.015”) and 0.56mm (0.022”) 


16.5 x 15.1 x 0.38mm (0.015”) and 0.56mm (0.022”) 


8.0 x 25.0 x 0.38mm (0.015”) and 0.64mm (0.025”) 




J.54, SMALL BONE POWER PRODUCTS Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 813.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540

For use with: 

Mini-Driver Sagittal Saw Attachment (K220) 



Cat. No. 


6.4 x 14.2 x 0.71mm (0.028”) and 0.97mm (0.038”) 


6.4 x 30.0 x 0.71mm (0.028”) and 0.97mm (0.038”) 


10.2 x 14.2 x 0.71mm (0.028”) and 0.97mm (0.038”) 


10.2 x 30.0 x 0.71mm (0.028”) and 0.97mm (0.038”) 


15.5 x 14.2 x 0.71mm (0.028”) and 0.97mm (0.038”) 


19.1 x 27.4 x 0.38mm (0.015”) and 0.65mm (0.026”) 


14.0 x 27.4 x 0.38mm (0.015”) and 0.65mm (0.026”) 


9.5 x 27.4 x 0.38mm (0.015”) and 0.65mm (0.026”) 


19.1 x 42.7 x 0.38mm (0.015”) and 0.65mm (0.026”) 





25 

mm 

40 

mm 

25 

mm 

10 

mm 

10 

mm 

25 

mm 

40 

mm 

10 

mm 

25 

mm 

20 

mm 

35 

mm 

20 

mm 

35 

mm 

5 

mm 

5 

mm 

20 

mm 

5 

mm 

20 

mm 

15 

mm 

30 

mm 

15 

mm 

30 

mm 

15 

mm 

15 

mm 

10 

mm 

25 

mm 

10 

mm 

25 

mm 

10 

mm 

10 

mm 

5 

mm 

20 

mm 

5 

mm 

20 

mm 

5 

mm 

5 

mm 

15 

mm 

15 

mm 

10 

mm 

10 

mm 

5 

mm 

5 

mm


40 

mm 

40 

mm 

10 

mm 

10 

mm 

25 

mm 

35 

mm 

35 

mm 

5 

mm 

5 

mm 


HALL ® 

20 

mm 

30 

mm 

30 

mm 

15 

mm 

25 

mm 

25 

mm 

10 

mm 

10 

mm 

20 

mm 

20 

mm 

5 

mm 

5 

mm 

15 

mm 

15 

mm 

10 

mm 

10 

mm 

5 

mm 

5 

mm 


Cat. No. 


6.4 x 14.2 x 0.38mm (0.015”) and 0.65mm (0.026”) 


6.4 x 30.0 x 0.38mm (0.015”) and 0.65mm (0.026”) 


10.2 x 14.2 x 0.38mm (0.015”) and 0.65mm (0.026”) 


9.5 x 42.7 x 0.38mm (0.015”) and 0.65mm (0.026”) 


14.0 x 42.7 x 0.38mm (0.015”) and 0.65mm (0.026”) 


9.5 x 10.0 x 0.38mm (0.015”) and 0.65mm (0.026”) 


9.5 x 5.0 x 0.38mm (0.015”) and 8.0mm (.315”) 




For use with: 

Micro-Aire Sagittal Saws (1200, 1205, 1220, 1300 and 2200) 


Cat. No. 

Small Bone, Hall ® , Blade, Micro-Aire, Sagittal,........................................... 5053-360◆ 

12.0 x 20.0 x 0.25mm (0.010”) and 

Cut Thickness 0.5mm (0.020”), 

(Like Micro-Aire 1200-001) 

Small Bone, Hall, Blade, Micro-Aire, Sagittal, ............................................ 5053-361◆ 

7.0 x 20.0 x 0.25mm (0.010”) and 



Small Bone, Hall, Blade, Micro-Aire, Sagittal, ............................................ 5053-362◆ 

4.0 x 16.0 x 0.25mm (0.010”) and 



Small Bone, Hall, Blade, Angled, Micro-Aire, Sagittal, ............................... 5053-363◆ 

8.0 x 22.0 x 0.25mm (0.010”) and 



Small Bone, Hall, Blade, Angled, Micro-Aire, Sagittal, ............................... 5053-364◆ 

12.0 x 30.0 x 0.25mm (0.010”) and 





◆ = available only as box of 5, sterile 



Micro Sagittal and 

Oscillating Saw Blades 

20 mm 

20 mm 

20 

mm 

10 

mm 

20 

mm 

10 

mm 


15 mm 

15 mm 

5 

mm 

10 

mm 

10 mm 

15 

mm 

15 

mm 

5 

mm 

10 mm 

10 mm 

10 mm 

5 

mm 

5 

mm 

10 

mm 

5 

mm 

10 

mm 

5 mm 

5 mm 

5 

mm 

5 

mm 

For use with: 

Micro-Driver (U100) and Sagittal Saw Attachment (U300) or 

Oscillating Saw Attachment (U500) 

Straight Blades 


Cat. No. 

Micro-Driver, Blade, Sagittal and Oscillating, ................................................... U336■ 

Straight 12.7 x 20.1 x 0.25mm (0.01”) 

and 0.51mm (0.02”) 


Straight 12.2 x 22.5 x 0.38mm (0.015”) 

and 0.65mm (0.026”) 


Straight 4.0 x 17.9 x 0.25mm (0.01”) 

and 0.51mm (0.02”) 


Straight 7.4 x 22.5 x 0.25mm (0.01”) 

and 0.51mm (0.02”) 


Straight 8.1 x 7.0 x 0.25mm (0.01”) 

and 0.51mm (0.02”) 


Straight 10.3 x 11.1 x 0.25mm (0.01”) 

and 0.51mm (0.02”) 


Straight 12.3 x 16.1 x 0.25mm (0.01”) 

and 0.51mm (0.02”) 


Straight 4.1 x 17.9 x 0.38mm (0.015”) 

and 0.65mm (0.026”) 


Straight 7.4 x 22.5 x 0.38mm (0.015”) 

and 0.65mm (0.026”) 


Straight 7.9 x 7.0 x 0.38mm (0.015”) and 

0.65mm (0.026”) 


Straight 10.2 x 11.1 x 0.38mm (0.015”) 

and 0.65mm (0.026”) 





Cat. No. 

Micro-Driver , Blade, Sagittal and Oscillating, ................................................. U654■ 

Straight 12.2 x 16.1 x 0.38mm (0.015”) 

and 0.65mm (0.026”) 


Straight 5.5 x 12.0 x 0.38mm (0.015”) 

and 0.65mm (0.026”) 


Straight 9.5 x 18.5 x 0.38mm (0.015”) 

and 0.65mm (0.026”) 


Straight 5.5 x 18.5 x 0.38mm (0.015”) 

and 0.65mm (0.026”) 




Micro Sagittal and 

Oscillating Saw Blades 

15 

mm 


10 

mm 

10 mm 

15 

mm 

10 

mm 

5 

mm 

5 mm 

10 

mm 

5 

mm 

5 mm


Micro Oscillating 

Saw Blades 

For use with: 

MicroChoice ® Oscillating Saw (5020-024) 

Micro100 Oscillating Saw (5053-012) 

Micro E ® Oscillating Saw (5040-007) 



Cat. No. 

Micro Blade, Oscillating, Fine, Flat, 5.5 x 12.0 x 0.4mm, ............................. 5023-260 


Micro Blade, Oscillating, Fine, Flat, 10.0 x 12.0 x 0.4mm, ........................... 5023-261 















5023-2XX = 5 per box, sterile



Cat. No. 

Micro Blade, Oscillating, 20° Angled, 10.0 x 9.0 x 0.4mm,....................... 5023-258◆ 


Micro Blade, Oscillating, 20° Angled, 10.0 x 13.5 x 0.4mm,..................... 5023-259◆ 


Micro Blade, Oscillating, 20° Angled, 5.5 x 13.0 x 0.4mm,.......................... 5023-267 


Micro Blade, Oscillating, 20° Angled, 10.0 x 13.0 x 0.4mm,........................ 5023-268 


Crescentic Blades* 

Micro Blade, Crescentic, 9.0 x 12.0 x 0.4mm and ..................................... 5023-170■ 

Cutting Depth 12.0mm, Stainless Steel 

Micro Blade, Crescentic, 13.5 x 25.5 x 0.4mm and ................................... 5023-171■ 









◆ = available only as box of 5, sterile 

*US Patent 5,658,304 







For use with: 

MicroChoice ® Oscillating Saw (5020-024) 

Intra-Oral Blades* 


Cat. No. 

Micro Blade, Oscillating, Intra-Oral,.......................................................... 5023-101■ 

11.5 x 7.0 x 0.4mm and 

Cutting Depth 7.0mm, 



11.5 x 12.0 x 0.4mm and 




9.0 x 12.0 x 0.4mm and 




5.0 x 12.0 x 0.4mm and 




*US Patent 5,658,304

For use with: 

Micro100 Oscillating Saw (5053-012) 

Micro E ® Oscillating Saw (5040-007) 



Cat. No. 

Micro100/E (Only), Blade, Oscillating, 5.5 x 12.0 x 0.4mm ...................... 5053-060● 


Micro100/E (Only), Blade, Oscillating, 10.0 x 12.0 x 0.4mm .................... 5053-061● 























Cat. No. 

Micro100 /Micro E ® (Only), Blade, Oscillating, 70° Angled, ..................... 5053-048● 

Thick Extend, 10.0 x 13.0 x .04mm 


Micro100/E (Only), Blade, Oscillating, 20° Angled, .................................. 5053-067● 


Micro100/E (Only), Blade, Oscillating, 20° Angled, .................................. 5053-068● 


Micro100/E (Only), Blade, Oscillating,............................. 5053-269 (Box of 5, Sterile) 

20° Double Angled, 10.0 x 13.0 x 0.4mm ............... 5053-069 (Single, Non-Sterile) 


Micro100/E (Only), Blade, Oscillating, 70° Angled, .................................. 5053-277◆ 


Micro100/E (Only), Blade, Oscillating, 70° Angled, .................................. 5053-278◆ 




For use with: 

Micro-Driver (U100) and Oscillating Saw Attachment (U500) 

Crescent Blades 


Cat. No. 

Micro-Driver, Blade, Oscillating, Crescent,....................................................... U565● 

9.1 x 18.0 x 0.38mm (0.015”) and 

0.66mm (0.026”) 


14.0 x 25.7 x 0.38mm (0.015 in.) and 

0.66mm (0.026 in.) 


27.2 x 27.7 x 0.38mm (0.015”) and 

0.66mm (0.026”) 










For use with: 

Stryker Command 2 


Cat. No. 

Small Bone, Hall ® , Blade, Stryker, Oscillating, ............................................ 5053-310◆ 

5.5 x 25.2 x 0.4mm (0.016”) and 


(Like Stryker 277-31-102) 

Small Bone, Hall, Blade, Stryker, Oscillating, ............................................. 5053-311◆ 

9.5 x 25.2 x 0.4mm (0.016”) and 




11.3 x 25.2 x 0.4mm (0.016”) and 




5.5 x 11.8 x 0.4mm (0.016”) and 




9.5 x 18.5 x 0.4mm (0.016”) and 






For use with: 

MicroChoice ® Reciprocating Saw (5020-023) 

Micro100 Reciprocating Saw (5053-010) 

Micro E ® Reciprocating Saw (5040-003) 




Cat. No. 

Micro Blade, Reciprocating, Flat, 25.5x 0.25mm,...................................... 5053-122■ 


Micro Blade, Reciprocating, Flat, ...................................... 5053-220 (box of 5, sterile) 

25.5 x 0.4mm, Stainless Steel.................................... 5053-020 (single, non-sterile) 

Micro Blade, Reciprocating, Flat, ...................................... 5053-221 (box of 5, sterile) 

38.0 x 0.4mm, Stainless Steel.................................... 5053-021 (single, non-sterile) 

Round Shank Blades 

Micro Blade, Reciprocating, Round Shank,................................................ 5053-050● 

7.0 x 5.0mm Cut Depth, Stainless Steel 







Micro Blade, Reciprocating, Vertical Osteotomy, ...................................... 5053-054● 

Round Shank, 25.0 x 8.0mm 

Micro Blade, Reciprocating, Non-Depth Limiting, ..................................... 5053-126■ 

Round Shank, 28.0 x 0.6mm, Stainless Steel 



Micro Reciprocating 

Saw Blades




Rasps 


Cat. No. 

Micro Rasp, Straight Cut, Small, 5.5 x 9.5mm,.......................................... 5053-080■ 


Micro Rasp, Straight Cut, Large, 6.5 x 12.5mm, ....................................... 5053-081■ 


Micro Rasp, Cross Cut, Small, 5.5 x 9.5mm, ............................................. 5053-082■ 


Micro Rasp, Cross Cut, Large, 6.5 x 12.5mm, ........................................... 5053-083■ 


Micro Rasp, Intramedullary, Small, ............................................................ 5053-084■ 

54.6 x 24.5 x 5.3mm, Stainless Steel 

Micro Rasp, Intramedullary, Large,............................................................ 5053-085■ 

62.2 x 30.5 x 9.5mm, Stainless Steel 


For use with: 

Micro-Driver (U100) and Reciprocating Saw Attachment (U700) 


Cat. No. 

Micro-Driver, Blade, Reciprocating, Flat Shank,................................................ U770■ 

12.7 x 9.4 x 0.38mm (0.015”) and 0.67mm (0.026”) 


10.4 x 5.8 x 0.51mm (0.02”) and 0.90mm (0.035”) 


25.4 x 7.9 x 0.38mm (0.015”) and 0.69mm (0.027”) 


39.6 x 8.9 x 0.51mm (0.02”) and 0.88mm (0.035”) 


7.1 x 7.4 x 0.51mm (0.02”) and 0.79mm (0.031”) 


17.3 x 6.7 x 0.51mm (0.02”) and 0.79mm (0.031”) 


23.1 x 7.7 x 0.51mm (0.02”) and 0.79mm (0.031”) 


24.9 x 9.7 x 0.51mm (0.02”) and 0.79mm (0.031”) 










For use with: 

Stryker Command 2 


Cat. No. 

Small Bone, Hall ® , Blade, Stryker, Reciprocating, ....................................... 5053-331◆ 

41.0 x 0.6mm (0.024”) and 


(Like Stryker 1675-20) 

Small Bone, Hall, Blade, Stryker, Reciprocating,......................................... 5053-340◆ 

17.0 x 3.8mm x 0.6mm (0.024”) and 



Small Bone, Hall, Blade, Stryker, Reciprocating,......................................... 5053-341◆ 

27.0 x 0.6mm (0.024”) and 



For use with: 

Micro-Aire Reciprocating Saws (1400 and 2400) 

Small Bone, Hall ® , Blade, Micro-Aire, Reciprocating, ................................. 5053-370◆ 

25.0 x 0.4mm (0.016 “) and 




For use with: 

C-Serter ® (5050-020) 

Spade Tip C-Wire Bone Fixation Wires 



Cat. No. 

C-Wire, Spade Tip, Color-Coded Red, ......................................................... 5050-041 

0.028” (0.7mm) x 5.0”, 

316 Stainless Steel 

C-Wire, Spade Tip, Color-Coded Blue,......................................................... 5050-042 

0.035” (0.89mm) x 5.0”, 


C-Wire, Spade Tip, Color-Coded Green, ...................................................... 5050-043 

0.045” (1.14mm) x 5.0”, 


C-Wire, Spade Tip, Color-Coded Black, ....................................................... 5050-044 

0.062” (1.57mm) x 5.0”, 


Trocar Tip C-Wire Bone Fixation Wires 

C-Wire, Trocar Tip, Color-Coded Red, ......................................................... 5050-046 

0.028” (0.7mm) x 5.0”, 


C-Wire, Trocar Tip, Color-Coded Blue,......................................................... 5050-047 

0.035” (0.89mm) x 5.0”, 


C-Wire, Trocar Tip, Color-Coded Green, ...................................................... 5050-048 

0.045” (1.14mm) x 5.0”, 


C-Wire, Trocar Tip, Color-Coded Black, ....................................................... 5050-049 

0.062” (1.57mm) x 5.0”, 


5050-0XX = 50 per pack, sterile 

5050-2XX = 5 per pack, sterile 

Bone Fixation Wires 

Spade Tip Trocar Tip 

Cross section 

of C-Wire


Staplizer ® Staples 

For use with: 

Staplizer Handpiece (T100) 

T107 7mm Staplizer Drive Attachment Accepts Cartridges 

Containing 7mm Bridge with Staples 

Cat. No. 

Staplizer, Cartridge, 7.0 x 7.0mm, Titanium Staples, ...................................... 7707-03 

Plastic Cartridge, 5/Cartridge, Sterile 

Staplizer, Cartridge, 7.0 x 10.0mm, Titanium Staples, .................................... 7710-03 


T110 10mm Staplizer Drive Attachment Accepts 

Cartridges Containing 10mm Bridge with Staples 



Staplizer, Cartridge, 10.0 x 10.0mm, Titanium Staples, .................................. 7010-03 














Dimensions are width x height. 

All staples are packaged 3 Cartridges per box. 

J.72, SMALL BONE POWER PRODUCTS Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 813.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540




Cat. No. 









Dimensions are width x height. 

All staples are packaged 3 Cartridges per box. 

Staplizer ® Staples 


SMALL BONE 

POWER 

PRODUCTS 

HALL ® SURGICAL 

INDEX 

J.74, SMALL BONE POWER PRODUCTS . . . . . . . . . . .Customer Service: (within U.S.) Phone: 800.237.0169 • Fax 813.399.5256 • Customer Service: (outside U.S.) Phone: 727.392.6464 • Fax: 727.397.4540

Numerical Index 

Cat. No. Description Page No. 

1365-005 Accessory, Hex Wrench for 5057-040 J.14, J.16 

1365-016 Accessory, Micro Hall ® Lubricant J.28 

1375-003 MicroChoice ® , Bur Changer, non-sterile J.8, J.16 

1375-011 Micro E ® /Micro 100 , Long Bur Guard, stainless steel, overall length 2.7 in. (6.86cm) J.15, J.33, J.34 

1375-012 Micro 100/Micro E, Medium Bur Guard, stainless steel, overall length 1.8 in. (4.57cm) J.15, J.35, J.36 

1375-015 Accessory, Bur Brush J.28 

1375-020 Micro 100/Micro E Laminectomy Bur Guard, stainless steel, overall length 3.4 in. (9.4cm) J.15, J.33 

1375-021 Micro 100/Micro E, Rhinoplasty Bur Guard, stainless steel, overall length 3.4 in. (8.71cm) J.15, J.34 

1375-023 Micro 100/Micro E, Cloward X-Long Bur Guard, stainless steel, overall length 3.4 in. (9.4cm) J.15, J.32 

1375-028 Micro 100 Foot Control, non-sterile J.21 

1375-032 Micro 100/E, 20° Angle Attachment, stainless steel, for use on long bur series 5092- J.15, J.33, J.34 

1375-033 Micro 100/E, 20° X-Long Angle Attachment, stainless steel, for use on extra long bur series 5093 J.15, J.32 

1375-034 Micro 100/Micro E, Angle Attachment, 70° with Dental Head J.16 

1375-035 Micro 100/E, Contra Angle NSK Attachment, stainless steel, for use on short bur series 5089 and 5090 J.15, J.37, J.38 

1375-036 Micro 100/E, 90° Angle NSK Attachment, stainless steel, for use on short bur series 5089 and 5090 J.15, J.37, J.38 

1375-037 MicroChoice Attachment Lubricant J.8, J.9, J.10, J.15, J.16, J.28 

1375-040 Accessory, Y Connector J.24 

1384-042 Accessory, Autoclave Case, large J.26 

1387-022 Micro 100/Micro E, Tissue Retractor Guard, non-sterile J.15, J.33 

2075-017 Accessory, Pressure Tester J.24 

22173470000 Accessory, labels for Bur/Blade Cabinet J.27 

5020-021 MicroChoice, Handpiece, Medium Speed Drill, Electric, stainless steel, non-sterile J.8, J.32 

5020-022 MicroChoice, Handpiece, Sagittal Saw, Electric, stainless steel, non-sterile J.9, J.45, J.48, J.49 

5020-023 MicroChoice, Handpiece, Reciprocating Saw, Electric, stainless steel, non-sterile J.9, J.67 

5020-024 MicroChoice, Handpiece, Oscillating Saw, Electric, stainless steel, non-sterile J.9, J.60, J.62 

5020-025 MicroChoice, Handpiece, High Speed Drill, Electric, stainless steel, non-sterile J.8, J.32 

5020-026 MicroChoice, Handpiece, Low Speed Drill, Electric, stainless steel, non-sterile J.9, J.39 

5020-028 MicroChoice Attachment, Wiredriver, stainless steel, non-sterile J.10 

5020-029 MicroChoice Attachment, Universal Drill, stainless steel, non-sterile J.10 

5020-030 MicroChoice Attachment, 5/32" Jacobs Chuck Attachment, stainless steel, non-sterile J.10 

5020-031 MicroChoice Attachment, 5/32" High Torque Jacobs Chuck Attachment, stainless steel, w/key, non-sterile J.10 

5020-032 MicroChoice Attachment, Pin Driver, stainless steel, non-sterile J.10 

5020-034 MicroChoice Attachment, Dental Implant Head, stainless steel, non-sterile J.9, J.39 

5020-035 MicroChoice Attachment, Dental Implant Screw/Tap Head, stainless steel, non-sterile J.9, J.39 


5020-042 MicroChoice Attachment, 1/4" High Torque Jacobs Chuck Attachment, stainless steel, non-sterile J.10 

5020-053 Accessory, 2-Pedal Footswitch, for use with Advantage ® /E9000 ® /PowerPro ® J.7, J.9 

5020-054 Accessory, Console Stand J.29 

5020-057 MicroChoice, Accessory, Replacement Safe Slide J.9 

5020-058 MicroChoice, Accessory, Replacement Handpiece Lever J.9 

5020-060 MicroChoice, Bur Guard, medium, stainless steel, fits 5091- series burs, non-sterile J.8, J.35, J.36 

5020-061 MicroChoice, Bur Guard, long, stainless steel, fits 5092 series burs, non-sterile J.8, J.33, J.34 

5020-062 MicroChoic, Bur Guard, x-long, stainless steel, fits 5093 series burs, non-sterile J.8, J.32 

5020-063 MicroChoice, 20° Angle Attachment, stainless steel, non-sterile J.8, J.33, J.34 

5020-064 MicroChoice, 20° X-Long Angle Attachment, stainless steel J.8, J.32 

5020-065 MicroChoice, 70° Contra Angle Surgical Attachment, stainless steel, non-sterile J.8, J.37, J.38 


5020-067 MicroChoice, Bur Guard, Laminectomy, stainless steel, non-sterile J.8 

5020-068 MicroChoice, Bur Guard, Tissue Retractor, stainless steel, non-sterile J.8, J.33 

5020-069 MicroChoice, 70° Contra Angle Dental Attachment, stainless steel, non-sterile J.8 

5023-055 Micro Blade, Abrader, straight, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.46 

5023-056 Micro Blade, Abrader, medial, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.46 

5023-057 Micro Blade, Abrader, lateral, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.46 

5023-101 Micro Blade, Oscillating, Intra-Oral, stainless steel, 11.5 x 7 x 0.4mm, sterile J.62 

5023-102 Micro Blade, Oscillating, Intra-Oral, stainless steel, 11.5 x 12.0 x 0.4mm, sterile J.62 


5023-104 Micro Blade, Oscillating, Intra-Oral, stainless steel, 5 x 12 x 0.4mm, sterile J.62 

5023-144 Micro Blade, Sagittal, stainless steel, fine, flat, 5.5 x 18.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.46 

5023-170 Micro Blade, Crescentic, stainless steel, 9 x 12 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 

5023-171 Micro Blade, Crescentic, stainless steel, 13.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 


5023-176 Micro Blade, Crescentic, stainless steel, 13.5 x 32 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 

5023-186 Micro Blade, ACL, stainless steel, 8.5 x 38 x .4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.48 

5023-218 Micro Blade, Sagittal, stainless steel, fine, radial, 9.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.45 

5023-228 Micro Blade, Angled 70°, radial, stainless steel, 9.5 x 7.5 x 0.6mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.47 


5023-230 Micro Blade, Sagittal, stainless steel, coarse, flat, 19.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.45 







5023-234 Micro Blade, Angled 90°, coarse, stainless steel, 5.5 x 9.0 x 0.6mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.47 

5023-235 Micro Blade, Angled 45°, coarse, stainless steel, 5.5 x 18.0 x 0.6mm, can be used with MicroChoice ® , Micro 100 and Micro E ® , sterile J.47 










5023-258 Micro Blade, 20° Angled Oscillating, stainless steel, 10.0 x 9 x 0.4mm, can be used withMicroChoice, Micro 100 and Micro E, sterile J.61 

5023-259 Micro Blade, 20° Angled Oscillating, 10 x 13.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 

5023-260 Micro Blade, Oscillating, stainless steel, fine, flat, 5.5 x 12 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.60 

5023-261 Micro Blade, Oscillating, stainless steel, fine, flat, 10 x 12 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.60 

5023-262 Micro Blade, Oscillating, stainless steel, fine, flat, 5.5 x 18.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.60 

5023-263 Micro Blade, Oscillating, stainless steel, fine, flat, 10 x 18.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.60 

5023-264 Micro Blade, Oscillating, stainless steel, fine, flat, 5.5 x 28.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E , sterile J.60 



5023-267 Micro Blade, 20° Angled Oscillating, stainless steel, 5.5 x 13 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 

5023-268 Micro Blade, 20° Angled Oscillating, 10 x 13 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 


5023-282 Micro Blade, ACL, stainless steel, 19 x 41 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.48 

5023-283 Micro Blade, ACL, stainless steel, 9.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.48 

5023-284 Micro Blade, ACL, stainless steel, 9.5 x 41.0 x 0 .4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.48 


5023-405 Micro Blade, ACL, Graft Harvesting, stainless steel, graft length 20mm, graft width 5mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.49 

5023-406 Micro Blade, ACL, Graft Harvesting, stainless steel, graft length 20mm, graft width 6mm, sterile, can be used with MicroChoice, Micro 100 and Micro E, sterile J.49 








5030-010 Accessory, Autoclave Container, Half Size 11 x 12 x 6 in. J.25 

5030-011 Accessory, Autoclave Basket, Half Size 10 x 11 x 2 in. J.25 

5030-020 Accessory, Autoclave Container, 18 x 12 x 6 in. J.25, J.26, J.27 

5030-021 Accessory, Autoclave Container, 17 x 11 x 2 in. J.26 

5030-025 Accessory, Sterile Processing Cards J.27 

5030-026 Accessory, Tamper Evident Arrows J.27 

5030-028 Accessory, Small Clamp J.27 

5030-029 Accessory, Medium Clamp J.27 

5030-030 Accessory, Large Clamp J.27 

5030-031 Accessory, ID Plate, "Hall ® Surgical" J.26 

5030-040 Accessory, Sterile Container Accessory Kit J.27 

5037-033 Accessory, Filters, Disposable, 9 x 9 in., Non-sterile J.26, J.27 

5039-003 Accessory, Power Cord, 10 ft. (3.05m) J.21 

5040-110 Micro, Accessory, Irrigation, Tubing J.29 

5040-112 Accessory, Micro, Instrument Clips, Micro 100/Surgairtome Two ® J.29 

5040-115 Accessory, Irrigation, Universal Hose Sensor J.29 

5040-120 Micro E, Accessory, Irrigation, Tubing, disposable J.29 

5040-122 Accessory, Micro, Irrigation Clip, Micro E/Surgairtome Two J.29 

5040-125 Micro E, Accessory, Irrigation, Sensor J.29 

5040-129 Accessory, Micro, Irrigation, Tubing, reusable J.30 

5040-130 MicroChoice, Accessory, Irrigation, Handpiece Clip, reusable J.30 

5040-140 Accessory, Micro, Irrigation, Tip, Micro 100/E Sagittal, reusable J.29 

5040-141 Accessory, Micro, Irrigation, Tip, Micro 100/E Oscillating, reusable J.29 

5040-142 Micro, Accessory, Irrigation, Tip, Reciprocating, reusable J.29 

5040-143 Micro E/Miro 100, Accessory, Irrigation, Tip, Reciprocating, reusable J.29 

5040-150 Accessory, Micro, Irrigation, Tip, Medium Bur Guard and Bending Rod J.29, J.31 

5040-151 Accessory, Micro, Irrigation, Tip, Long Bur Guard and Bending Rod J.31 

5040-152 Accessory, Micro, Irrigation, Tip, Laminectomy Bur Guard J.31 

5040-153 Accessory, Micro, Irrigation, Tip, 20°, Angle Bur and Bending Rod J.31 

5040-154 Accessory, Micro, Irrigation, Tip, X-long 20° Angle Bur and Bending Rod J.31 

5040-155 Accessory, Micro, Irrigation, Tip, Medium Bur Guard, reusable J.31 

5040-156 Accessory, Micro, Irrigation, Tip, Long Bur Guard, reusable J.31 

5040-158 Accessory, Micro, Irrigation, Tip, 20°, Angle Bur, reusable J.31 

5040-159 Accessory, Micro, Irrigation, Tip, X-long 20° Angle Bur, reusable J.31 




5040-170 Accessory, Micro, Irrigation, Pump Pole Mount Kit J.30 

5040-180 Accessory, Micro, Irrigation, Bag Support J.28 

5040-200 MicroChoice ® , Accessory, Irrigation, medium bur tip, reusable J.30 

5040-201 MicroChoice, Accessory, Irrigation, External 70 & 90° tip, reusable J.30 

5040-202 MicroChoice, Accessory, Irrigation, long tip, reusable J.30 

5040-203 MicroChoice, Accessory, Irrigation, Internal 70 & 90° tip, reusable J.30 

5040-205 MicroChoice, Accessory, Irrigation, Sagittal Saw Tip, reusable J.30 

5040-206 MicroChoice, Accessory, Irrigation, Oscillating Saw Tip, reusable J.30 

5040-207 MicroChoice, Accessory, Irrigation, Reciprocating Saw Tip, reusable J.30 

5040-208 MicroChoice, Accessory, Irrigation, extra long tip, reusable J.30 

5040-219 MicroChoice, Accessory, Irrigation, Universal Tip, disposable J.30 

5040-220 MicroChoice, Accessory, Irrigation, medium tip, disposable J.30 

5040-222 MicroChoice, Accessory, Irrigation, long tip, disposable J.30 

5040-228 MicroChoice, Accessory, Irrigation, x-long tip, disposable J.30 

5040-239 Accessory, Micro, Irrigation, Pump, Hall ® J.28, J.30 

5044-145 Micro Blade, Sagittal, stainless steel, fine, flat, 10.0 x 18.5.0 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E ® , sterile J.46 

5044-999-52 Accessory, Key for 1/4" Jacobs Chuck J.21 


5050-010 C-Serter ® Kit, 100 - 120 Vac J.18 

5050-020 C-Serter, Handpiece, stainless steel/aluminum, with battery, non-sterile J.18, J.71 

5050-021 C-Serter, Introducer Sleeve J.18 

5050-026 C-Serter, Sterilization Case J.18 

5050-027 C-Serter, Power Pack -Original Handpiece J.18 

5050-028 C-Serter, Power Pack J.18 

5050-031 C-Serter, Transformer, plastic, non-sterile J.18 

5050-033 C-Serter, Battery Charger J.18 

5050-035 C-Serter, Battery, Ni-Cad, non-sterile J.18 

5050-037 C-Serter, Storage Case, aluminum J.18 

5050-041 C-Wire Spade Tip, .7mm dia., 5 inch length, sterile J.71 

5050-042 C-Wire Spade Tip, .86mm dia., 5 inch length, sterile .89mm J.71 

5050-043 C-Wire Spade Tip, 1.14mm dia., 5 inch length, sterile J.71 


5050-046 C-Wire Trocar Tip, .7mm dia., 5 inch length, sterile J.71 


5050-048 C-Wire Trocar Tip, 1.14mm dia., 5 inch length, sterile J.71 


5050-060 C-Serter Kit, 220 - 240 Vac J.18 

5050-061 C-Serter Transformer, 220 - 240 Vac J.18 

5052-010 Accessory, Universal Hose, 10 ft (3.05m), for use with all Hall Air Systems J.16, J.23 

5052-012 Accessory, Sterilization Case, 10 x 7 x 3.3 in. J.26 

5052-016 Accessory, Universal Hose, 15 ft (4.57m), for use with all Hall Air Systems J.23 


5052-018 Accessory, Extension Hose, 10 ft (3.05m), for use with all Hall Air Systems J.23 





5052-101 Accessory, Hose Handler J.24 

5052-400 Accessory, Bur and Blade Cabinet J.27 

5053-009 Micro 100, Handpiece, Drill, without hose J.15, J.16, J.32 

5053-010 Micro 100, Handpiece, Reciprocating Saw, without hose J.16, J.67 

5053-011 Micro 100, Handpiece, Sagittal Saw, without hose J.16, J.45, J.48, J.49, J.50 

5053-012 Micro 100, Handpiece, Oscillator Saw, without hose J.16, J.60, J.63 

5053-013 Micro 100, Handpiece, Wiredriver, without hose J.16, J.28 

5053-018 Micro 100/E (only) Sagittal Blade, 9.5 x 25.5mm, non-sterile J.50 

5053-019 Micro 100/E Wiredriver 100 Chuck Adaptor J.16 

5053-020 Micro Blade, Reciprocating, flat, stainless steel, 25.5 x .4mm, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.67 

5053-021 Micro Blade, Reciprocating, flat, stainless steel, 38 x .4mm, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.67 

5053-022 Micro 100, Handpiece, Oscillator Saw, x-long, without hose J.16 

5053-028 Micro 100/E (only) Sagittal Blade, 70º angled, 9.5 x 7.5mm, non-sterile J.51 





5053-033 Micro 100/E (only) Sagittal Blade, 14 x 41.0mm, non-sterile J.50 

5053-034 Micro 100/E (only) Sagittal Blade, 90º angled 5.5 x 9.0mm, non-sterile J.51 








5053-039 Micro 100 /Micro E ® (only) Sagittal Blade, 4.5 x 25.5mm, non-sterile J.50 

5053-040 Micro 100/Micro E (only) Sagittal Blade, 9.5 x 41.0mm, non-sterile J.51 



5053-048 Micro 100/E (only) Oscillating Blade, 70º angled, thick extend, non-sterile J.64 

5053-050 Micro Blade, Reciprocating, round shank, 7 x 5mm stainless steel, can be used with MicroChoice ® , Micro 100 and Micro E, non-sterile J.67 

5053-051 Micro Blade, Reciprocating, round shank, 17 x 4mm stainless steel, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.67 


5053-053 Micro Blade, Reciprocating, round shank, 25 x 7mm stainless steel, can be used with MicroChoice, +Micro 100 and Micro E, non-sterile J.67 

5053-054 Micro Blade, Reciprocating, vertical osteotomy, round shank, 25 x 8mm stainless steel, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.67 

5053-060 Micro 100/E (only) Oscillating Blade, 5.5 x 12.0mm, non-sterile J.63 







5053-067 Micro 100/E (only) Oscillating Blade, 5.5 x 13.0mm, non-sterile, 20º angled J.64 




5053-080 Micro 100/E (only) Reciprocating Rasp, small, straight cut, sterile, 5.5 x 9.5mm J.68 

5053-081 Micro 100/E (only) Reciprocating Rasp, large, straight cut, sterile, 6.5 x 12.5mm J.68 

5053-082 Micro 100/E (only) Reciprocating Rasp, small, cross cut, sterile, 5.5 x 9.5mm J.68 

5053-083 Micro 100/E (only) Reciprocating Rasp, large, cross cut, sterile, 6.5 x 12.5mm J.68 

5053-084 Micro 100/E (only) Reciprocating Rasp, small, intramedullary, non-sterile, 54.6 x 24.5 x 5.3mm J.68 

5053-085 Micro 100/E (only) Reciprocating Rasp, large, intramedullary, non-sterile, 62.2 x 30.5 x 9.5mm J.68 

5053-122 Micro Blade, Reciprocating, flat, stainless steel, 25.5 x .25mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.67 

5053-123 Accessory, Wire Guard J.28 

5053-124 Accessory, Cleaning Brush J.27 

5053-126 Micro Blade, Reciprocating, Non-Depth Limiting, round shank, 28 x .6mm, stainless steel, can be used with MicroChoice, Micro 100 and Micro E, sterile J.67 


5053-221 Micro 100/E Reciprocating Blade, 38.0 x 4.0mm, sterile J.67 

5053-269 Micro 100/E Oscillating Saw Blade, 20º double angled, 10.0 x 13.0mm, sterile J.64 



5053-310 Micro Blade, Stryker Replacement, 277-31-102, 5.5 x 25.2mm, sterile J.66 





5053-331 Micro Blade, Stryker Replacement, 1675-20, 41mm, sterile J.70 



5053-360 Micro Blade, MicroAire Replacement, 1200-001, straight 12.0 x 20mm, sterile J.57 

5053-361 Micro Blade, MicroAire Replacement, 1200-005, 7.0 x 20mm, sterile J.57 


5053-363 Micro Blade, MicroAire Replacement, 1200-008, angled, 8.0 x 22mm, sterile J.57 


5053-370 Micro Blade, MicroAire Replacement, 1400-001, 25mm, sterile J.70 

5057-040 Sternum Saw, Handpiece, Repeat Sternotomy Saw, without hose J.16 

5058-001 Surgairtome Two ® , Handpiece without Hose J.15 

5067-002 Series 4, Handpiece, Oscillating Saw, Pneumatic, without hose J.48 

5088-170 Micro Bur, Pilot Drill Dental, 1.0 x 7.0mm, sterile J.39 













5088-211 Micro Bur, tapered, fissure, carbide, 1.2 x 4.5mm, can be used with MicroChoice, Micro 100, Micro E, Surgitome E and Surgairtome Two Drills, sterile J.39 


5088-224 Micro Bur, round, carbide, 2.1mm, can be used with MicroChoice, Micro 100, Micro E, Surgitome E and Surgairtome Two Drills, sterile J.39 





5088-242 Micro Bur, wirepass Drill, 1.0 x 15mm, sterile J.39 


5089-208 Micro Bur, side cutting carbide, straight, 1.5 x 8.0mm, sterile J.37 

5089-220 Micro Bur, round carbide, 1.0mm, sterile J.37 

5090-113 Micro Bur, Tapered Fissure, Short, 2.1 x 4.5mm, #703 J.38 

5090-170 Micro Bur, Pilot Drill, 1.0 x 7mm, short, sterile J.37 













5090-201 Micro Bur, side cutting carbide, straight, 1.0 x 5.0mm, short, sterile J.37 




5090-206 Micro Bur, side cutting carbide, tapered, 2.0 x 7.5mm, short, sterile J.37 

5090-211 Micro Bur, tapered fissure, 1.2 x 4.5mm, short, sterile J.38 

5090-213 Micro Bur, tapered fissure, short, sterile, 2.1 x 4.5mm J.38 

5090-220 Micro Bur, round carbide, 1.0mm, short, sterile J.37 



5090-247 Micro Bur, wire pass Drill, steel, 1.0 x 19mm, short, sterile J.37 



5090-291 Micro Bur, round cylindrical, M-8 type, 3.0mm, short, sterile J.37 

5091-080 Micro Bur, dermabrader, diamond, straight, 4.0 x 15.0mm, medium, non-sterile J.36 




5091-113 Micro Bur, Tapered, Fissure, Medium, 2.1 x 4.9mm, #703 J.35 

5091-201 Micro Bur, side cutting carbide, straight, 1.0 x 5.0mm, medium, sterile J.35 



5091-206 Micro Bur, side cutting carbide, tapered, 2.0 x 7.5mm, medium, sterile J.35 

5091-212 Micro Bur, side cutting carbide, Lindemann, 1.6 x 31mm, medium, sterile J.35 

5091-213 Micro Bur, Tapered, Fissure, Medium, 2.1 x4.9mm, #703 J.35 






5091-219 Micro Bur, side cutting carbide, round, 1.2 x 3.7mm, medium, sterile J.35 

5091-221 Micro Bur, round carbide, 1.8mm, medium, sterile J.35 









5091-236 Micro Bur, oval carbide, 4.0 x 8mm, medium, sterile J.35 


5091-242 Micro Bur, Swanson Reamer steel, 2mm, medium, sterile J.35 




5091-247 Micro Bur, wire pass steel, 1.0 x 19mm, medium, sterile J.36 



5091-252 Micro Bur, barrel cutting carbide, 2.0 x 10mm, medium, sterile J.36 


5091-260 Micro Bur, round diamond, 2.0mm, medium, sterile J.36 






5091-270 Micro Bur, oval diamond, 4 x 8mm, medium, sterile J.36 



5092-203 Micro Bur, side cutting carbide, straight, 1.7 x 12.0mm, long, sterile J.8, J.15, J.33 

5092-204 Micro Bur, side cutting carbide, straight, 1.5 x 7.5mm, long, sterile J.33 

5092-206 Micro Bur, side cutting carbide, tapered, 2.0 x 7.5mm, long, sterile J.33 

5092-212 Micro Bur, side cutting, 1.6 x 43.7mm, long, Lindemann, sterile J.33 


5092-220 Micro Bur, round carbide, 1.0mm, long, sterile J.33 







5092-236 Micro Bur, oval carbide, 4.0 x 8mm, long, sterile J.8, J.15, J.33 

5092-238 Micro Bur, oval carbide, 5.5 x 10mm, long, sterile J.33 

5092-247 Micro Bur, wire pass steel, 1.0 x 19mm, long, sterile J.33 

5092-252 Micro Bur, barrel cutting carbide, 2.0 x 10.0mm, long, sterile J.34 


5092-260 Micro Bur, round diamond, 2.0mm, long, sterile J.34 





5092-270 Micro Bur, oval diamond, 4 x 8mm, long, sterile J.34 

5092-271 Micro Bur, tapered, fissure, 1.2 x 2.3mm, #701, long, sterile J.33 



5092-274 Micro Bur, Rhinoplasty diamond, 2.0 x 19mm, long, sterile J.15, J.34 

5092-282 Micro Bur, heavy grit diamond, 2mm, long, sterile J.34 





5092-291 Micro Bur, round cylindrical, 3.0mm, sterile J.34 

5092-292 Micro Bur, round cylindrical, M-8 type, 4.0mm, long, sterile J.34 

5093-220 Micro Bur, round, carbide, 6 flutes, 1mm, x-long, can be used with MicroChoice ® , Micro 100 , Micro E ® , Surgitome E ® and Surgairtome Two ® Drills sterile J.32 

5093-221 Micro Bur, round, carbide, 4 flutes, .5mm, x-long, can be used with MicroChoice, Micro 100, Micro E, Surgitome E and Surgairtome Two Drills, sterile J.32 

5093-224 Micro Bur, round, carbide, 6 flutes, 2.0mm, x-long, can be used with MicroChoice, Micro 100, Micro E, Surgitome E and Surgairtome Two Drills, sterile J.32 





5093-236 Micro Bur, oval, carbide, 8 flutes, 4.0 x 8.0mm, x-long, can be used with MicroChoice, Micro 100, Micro E, Surgitome E and Surgairtome Two Drills, sterile J.32 


5093-260 Micro Bur, round diamond, 2.0mm, x-long, sterile J.32 




5093-282 Micro Bur, heavy grit diamond, 2mm, x-long, sterile J.32 





5093-291 Micro Bur, round cylindrical, M-8 type, 3.0mm, x-long, sterile J.32 

5144-002 Accessory, Coupler, Schrader J.24 

7007-03 Staplizer ® , Cartridge, 10 x 7 J.72 

7010-03 Staplizer, Cartridge, 10 x 10 J.72 















8703 Micro Blade, ACL/PCl, 9.5 x 25/5 x 0.4mm J.48 

A101 Accessory, Air Hose, Mini-Driver K200, Micro-Driver U100, Minos A200P and A300, Staplizer T100, 20' J.23 

A201 Accessory, Air Hose, Mini-Driver K200, Micro-Driver U100, Minos A200P and A300, Staplizer T100, 10' J.13, J.17, J.23 

C8803 Blade, Saw, Free-Hand, Micro 100/Series 3/4, VersiPower Plus J.48 

C8804 Blade, Saw, Free-Hand, MicroChoice ® /Micro 100 J.48 

C8806 Blade, Saw, Free-Hand, 10mm Depth, J.48 

C8902 Micro Blade, ACL/PCl, 9.5 x 25/5 x 0.4mm J.48 

C8904 Micro Blade, ACL/PCl, 9.4 x 40.9 x 0.38 x 12.0 x 0.6mm J.48 

C9863 Accessory, Footswitch, 3-Pedal , for use with Advantage ® /E9000 ® /PowerPro ® J.7, J.9 

D3000 Advantage, Console with Cord, 115 volt J.7 

D3000I Advantage, Console with Cord, 230 volt J.7 

D3000J Advantage, Console with Cord, 100 volt J.7 

D471 Mini/Maxi-Driver , Accessory, Trinkle Twist Drill, stainless steel for K112, L112, G112, 3.0mm (0.12") J.22 

D472 Mini/Maxi-Driver, Accessory, Trinkle Twist Drill, stainless steel for K112, L112, G112, 2.8mm (0.11") J.22 






D520 Mini/Maxi-Driver, Accessory, Screwdriver for K112, L112, G112 with choice of one bit J.22 

D521 Mini/Maxi-Driver, Accessory, Slotted Bit for K112, L112, G112 for Screwdriver D520 J.22 

D522 Mini/Maxi-Driver, Accessory, Cruciate Bit for K112, L112, G112, for Screwdriver D520 J.22 

D523 Mini/Maxi-Driver, Accessory, Phillips Bit for K112, L112, G112, for Screwdriver D520 J.22 

D524 Mini-Driver/Maxi-Driver, Accessory, Screwdriver with Hex Bit D525 J.22 

D525 Mini/Maxi-Driver, Accessory, Hex Bit for Screwdriver D524 J.22 

E306 Accessory, Autoclave Case, Universal J.25 

E9000 E9000, Console, with Cord, 115 volt J.7, J.8, J.9, J.13, J.28, J.30 

E9000G E9000, Console, with Cord, 220 volt J.7 

E9000J E9000, Console, with Cord, 100 volt J.7 

E9418 MicroChoice, Tubing Set for irrigation, for E9000/Advantage Consoles, sterile J.30 

K109 Mini-Driver, Attachment, 1/4" Jacobs Chuck, stainless steel, non-sterile J.13 

K110 Mini-Driver, Attachment, Small Jacob Chuck, stainless steel, non-sterile J.13 

K111A Mini-Driver, Attachment, Automatic Wire Driver, stainless steel, non-sterile J.14 

K112 Mini-Driver, Attachment, Trinkle, stainless steel, non-sterile J.14 

K113 Mini-Driver, Attachment, Hudson Chuck, stainless steel, non-sterile J.14 

K114A Mini-Driver, Attachment, AO/ASIF Twist Drill Chuck, non-sterile J.14 

K120 Mini-Driver, Attachment, Sagittal Saw, stainless steel, can only be used with pneumatic handpiece, non-sterile J.13, J.54 

K121 Mini-Driver Blade, Sagittal, fine for Sagittal Saw K120 only, 15.1x6.4x0.89mm, sterile J.54 



























K200 Mini-Driver, Handpiece, Pneumatic, stainless steel, non-sterile J.13, J.14, J.17, J.54 

K210 Mini-Driver, Attachment,1/4 in. High-Torque Jacobs Chuck, stainless steel, non-sterile J.13 

K211 Mini-Driver, Attachment, Automatic Pin Driver, stainless steel, non-sterile J.14 

K220 Mini-Driver, Attachment, Sagittal Saw, stainless steel, non-sterile J.14, J.55 




K501 Advantage ® /E9000 ® /PowerPro ® , Adapter, for Mini-Driver Handpiece, non-sterile J.13 

L10D Micro-Driver and Minos Bur, long, round, diamond, for A211, A235 and U211, 1.0mm J.42 

L10R Micro-Driver and Minos Bur, long, round, carbide, for A211, A235 and U211, 1.0mm J.41 

L12T Micro-Driver and Minos Bur, long, tapered, side-cutting, carbide for A211, A235, and U211, 1.2 x 9.9mm, sterile J.41 

L13S Micro-Driver and Minos Bur, long, straight, side-cutting, carbide for A211, A235, and U211, 1.3x9.9mm, sterile J.41 

L15R Micro-Driver and Minos Bur, long, round, carbide for A211, A235, and U211, 1.5mm, sterile J.41 

L17L Micro-Driver and Minos Bur, long, laminectomy side-cutting, carbide for A211, A235, and U211, 1.6x21.9mm, sterile J.41 



L20D Micro-Driver and Minos Bur, long, round, diamond for A211, A235, and U211, 2.0mm, sterile J.42 


L20T Micro-Driver and Minos Bur, long, tapered, side-cutting, carbide for A211, A235, and U211, 1.6x21.9mm, sterile J.41 




L40B Micro-Driver and Minos Bur, long, barrel, carbide for A211, A235 and U211, 4.0x7.9mm, sterile J.41 

L40D Micro-Driver and Minos Bur, long, round, diamond for A211, A235 and U211, 4.0mm, sterile J.42 

L40R Micro-Driver and Minos Bur, long, round, carbide for A211, A235 and U211, 4.0mm, sterile J.41 

L45C Micro-Driver and Minos Bur, long, cone, carbide for A211, A235 and U211, 4.5x12.0mm, sterile J.42 

L4BD Micro-Driver and Minos Bur, long, barrel, oval, diamond for A211, A235 and U211, 4.0x10.0mm, sterile J.42 







M105A Accessory, Blitz ® II Surgical Instrument Cleaner and Lubricant J.28 

M10S Micro-Driver and Minos Bur, medium, straight side-cutting, carbide for A212 and U200, 1.1x5.0mm, sterile J.43 

M10T Micro-Driver and Minos Bur, medium, tapered side-cutting, carbide for A212 and U201, 1.1x9.9mm, sterile J.43 

M10W Micro-Driver and Minos Bur, medium, wirepass, stainless steel for A212 and U202, 1.0x5.1mm, sterile J.44 



M15R Micro-Driver and Minos Bur, medium, round, carbide for A212 and U201, 1.5mm, sterile J.43 






M207 Accessory, Nitrogen Regulator, Single J.24 

M208 Accessory, Nitrogen Regulator, Dual J.24 

M20D Micro-Driver and Minos Bur, medium, round, diamond for A212 and U200, 2.0mm, sterile J.44 

M20F Micro-Driver and Minos Bur, medium, reamer, stainless steel for A212 and U202, 2.0x12.7mm, sterile J.44 




M20W Micro-Driver and Minos Bur, medium, wirepass, stainless steel, for A212 and U202, 2.0x6.9mm, sterile J.44 





M317 Accessory, Lubricant, Maxi-Driver , Mini-Driver , Micro-Driver, Minos, Craniotome, Staplizer ® , Ronjair ® J.28 

M321 Accessory, Male Stryker to Female J.23 

M322 Accessory, Diss to Schrader Adaptor J.23 

M334 Mini-Driver Electric Handpiece Cord, 15' J.13 

M40B Micro-Driver and Minos Bur, medium, barrel, carbide for A212 and U201, 4.0x7.9mm, sterile J.43 




M45C Micro-Driver and Minos Bur, medium, cone, carbide for A212 and U202, 4.5x12.0mm, sterile J.44 






MC5057 Accessory, Handpiece Cord J.7 

PRO2000 PowerPro ® , Console, Electric, 115V J.7 

PRO2000I PowerPro, Console, Electric, 230V J.7 

PRO2029 PowerPro, Attachment, Trinkle/AO J.12 

PRO2030 PowerPro, Attachment, 5/32" Jacobs Chuck J.12 

PRO2038 PowerPro Battery AO Small Attachment J.12 




PRO2041 PowerPro ® , Attachment, 1/4" Jacobs Chuck J.11 

PRO2042 PowerPro, Attachment, 1/4" High Torque Jacobs Chuck J.12 

PRO2043 PowerPro, Attachment, Sagittal Saw J.12 

PRO2250 PowerPro, Attachment, 1/4" Keyless Chuck J.11 

PRO6028 PowerPro, Electric II, Attachment, Wire Driver J.11 

PRO6032 PowerPro, Electric II, Attachment, Pin Driver J.11 


PRO6100 PowerPro Electric II Modular Handpiece J.11 

T100 Staplizer ® , Handpiece, Pneumatic, stainless steel/aluminum J.19, J.72 

T107 Staplizer, Attachment, 7mm Carrier, stainless steel, accepts cartridges containing 7mm bridge width staples, non-sterile J.19, J.72 




T121 Staplizer, Accessory, Pry J.20 

T122 Staplizer, Accessory, Seater J.20 

T123 Staplizer, Accessory, Width Gauge J.20 

T210 Staplizer, Accessory, Autoclave Case J.20 

T301 Staplizer, Accessory, Disassembly Punch Removal Tool J.20 

T307 Staplizer, Accessory, Drill Guide, 7mm J.19 




U100 Micro-Driver , Handpiece, Pneumatic, stainless steel/aluminum J.13, J.17, J.40, J.41, J.43, J.52, J.58, J.65, J.69 

U200 Micro-Driver, Attachment, Drill, stainless steel, accepts long bur guard (U211), accepts x-long bur guard, (U212), non-sterile J.17, J.43, J.44 

U211 Micro-Driver, Bur Guard, long, stainless steel, non-sterile J.17, J.41, J.42 

U212 Micro-Driver, Bur Guard, x-long, stainless steel, non-sterile J.17, J.40 

U300 Micro-Driver, Attachment, Sagittal Saw, stainless steel, non-sterile J.17, J.52, J.58 

U330 Micro-Driver Blade, Sagittal, 45° Angled for Sagittal Saw U300 only, 11.7x4.1x0.51mm, sterile J.52 



U333 Micro-Driver Blade, Sagittal, 15° Bend for Sagittal Saw U300 only, 4.8x8.1x0.51mm, non-sterile J.52 



U336 Micro-Driver Blade, Sagittal & Oscillating, straight for Sagittal Saw U300 and U500, 20.1x12.7x0.51mm, sterile J.58 

U337 Micro-Driver Blade, Sagittal, straight for Sagittal Saw U300 only, 29.2x12.7x0.51mm, sterile J.53 







U500 Micro-Driver, Attachment, Oscillating Saw, stainless steel, non-sterile J.17, J.58, J.65 






U565 Micro-Driver Blade, Oscillating, Crescent, 18.0 x 9.1 x 0.66mm, non-sterile J.65 












U700 Micro-Driver, Attachment, Reciprocating Saw, stainless steel, non-sterile J.17, J.69 

U770 Micro-Driver Blade, Reciprocating, flat shank for U700, 12.7 x 0.67 x 9.4mm, sterile J.69 








X10D Micro-Driver and Minos Bur, x-long, round, diamond for A223, A245 and U212, 1.0mm, sterile J.40 





X20R Micro-Driver and Minos Bur, x-long, round, carbide for A223, A245 and U212, 2.0mm, sterile J.40 



X40B Micro-Driver and Minos Bur, x-long, barrel, carbide for A223, A245 and U212, 4.0x7.9mm, sterile J.40 



X45C Micro-Driver and Minos Bur, x-long, cone, carbide for A223, A245 and U212, 4.5x12.0mm, sterile J.40 






Alphabetical Index 


5020-053 Accessory, 2-Pedal Footswitch, for use with Advantage ® /E9000 ® /PowerPro ® J.7, J.9 

A201 Accessory, Air Hose, Mini-Driver K200, Micro-Driver U100, Minos A200P and A300, Staplizer ® T100, 10' J.13, J.17, J.23 

A101 Accessory, Air Hose, Mini-Driver K200, Micro-Driver U100, Minos A200P and A300, Staplizer T100, 20' J.23 

5030-011 Accessory, Autoclave Basket, Half Size 10 x 11 x 2 in. J.25 

1384-042 Accessory, Autoclave Case, large J.26 

E306 Accessory, Autoclave Case, Universal J.25 

5030-021 Accessory, Autoclave Container, 17 x 11 x 2 in. J.26 

5030-020 Accessory, Autoclave Container, 18 x 12 x 6 in. J.25, J.26, J.27 

5030-010 Accessory, Autoclave Container, Half Size 11 x 12 x 6 in. J.25 

M105A Accessory, Blitz ® II Surgical Instrument Cleaner and Lubricant J.28 

5052-400 Accessory, Bur and Blade Cabinet J.27 

1375-015 Accessory, Bur Brush J.28 

5053-124 Accessory, Cleaning Brush J.27 

5020-054 Accessory, Console Stand J.29 

5144-002 Accessory, Coupler, Schrader J.24 

M322 Accessory, Diss to Schrader Adaptor J.23 

5052-018 Accessory, Extension Hose, 10 ft (3.05m), for use with all Hall ® Air Systems J.23 




5037-033 Accessory, Filters, Disposable, 9 x 9 in., Non-sterile J.26, J.27 

C9863 Accessory, Footswitch, 3-Pedal , for use with Advantage/E9000/PowerPro J.7, J.9 

MC5057 Accessory, Handpiece Cord J.7 

1365-005 Accessory, Hex Wrench for 5057-040 J.14, J.16 

5052-101 Accessory, Hose Handler J.24 

5030-031 Accessory, ID Plate, "Hall Surgical" J.26 

5040-115 Accessory, Irrigation, Universal Hose Sensor J.29 



22173470000 Accessory, labels for Bur/Blade Cabinet J.27 

5030-030 Accessory, Large Clamp J.27 

M317 Accessory, Lubricant, Maxi-Driver, Mini-Driver, Micro-Driver, Minos, Craniotome, Staplizer, Ronjair ® J.28 

M321 Accessory, Male Stryker to Female J.23 

5030-029 Accessory, Medium Clamp J.27 

1365-016 Accessory, Micro Hall Lubricant J.28 

5040-112 Accessory, Micro, Instrument Clips, Micro 100 /Surgairtome Two ® J.29 

5040-122 Accessory, Micro, Irrigation Clip, Micro E/Surgairtome Two J.29 

5040-180 Accessory, Micro, Irrigation, Bag Support J.28 

5040-170 Accessory, Micro, Irrigation, Pump Pole Mount Kit J.30 

5040-239 Accessory, Micro, Irrigation, Pump, Hall® J.28, J.30 

5040-153 Accessory, Micro, Irrigation, Tip, 20°, Angle Bur and Bending Rod J.31 

5040-158 Accessory, Micro, Irrigation, Tip, 20°, Angle Bur, reusable J.31 

5040-152 Accessory, Micro, Irrigation, Tip, Laminectomy Bur Guard J.31 

5040-151 Accessory, Micro, Irrigation, Tip, Long Bur Guard and Bending Rod J.31 

5040-156 Accessory, Micro, Irrigation, Tip, Long Bur Guard, reusable J.31 

5040-150 Accessory, Micro, Irrigation, Tip, Medium Bur Guard and Bending Rod J.29, J.31 

5040-155 Accessory, Micro, Irrigation, Tip, Medium Bur Guard, reusable J.31 

5040-141 Accessory, Micro, Irrigation, Tip, Micro 100/E Oscillating, reusable J.29 

5040-140 Accessory, Micro, Irrigation, Tip, Micro 100/E Sagittal, reusable J.29 

5040-154 Accessory, Micro, Irrigation, Tip, X-long 20° Angle Bur and Bending Rod J.31 

5040-159 Accessory, Micro, Irrigation, Tip, X-long 20° Angle Bur, reusable J.31 

5040-129 Accessory, Micro, Irrigation, Tubing, reusable J.30 

M208 Accessory, Nitrogen Regulator, Dual J.24 

M207 Accessory, Nitrogen Regulator, Single J.24 

5039-003 Accessory, Power Cord, 10 ft. (3.05m) J.21 

2075-017 Accessory, Pressure Tester J.24 

5030-028 Accessory, Small Clamp J.27 

5030-040 Accessory, Sterile Container Accessory Kit J.27 

5030-025 Accessory, Sterile Processing Cards J.27 

5052-012 Accessory, Sterilization Case, 10 x 7 x 3.3 in. J.26 

5030-026 Accessory, Tamper Evident Arrows J.27 

5052-010 Accessory, Universal Hose, 10 ft (3.05m), for use with all Hall Air Systems J.16, J.23 




5053-123 Accessory, Wire Guard J.28 

1375-040 Accessory, Y Connector J.24 

D3000J Advantage, Console with Cord, 100 volt J.7 

D3000 Advantage, Console with Cord, 115 volt J.7 

D3000I Advantage, Console with Cord, 230 volt J.7 




K501 Advantage ® /E9000 ® /PowerPro ® , Adapter, for Mini-Driver Handpiece, non-sterile J.13 

C8806 Blade, Saw, Free-Hand, 10mm Depth, J.48 

C8803 Blade, Saw, Free-Hand, Micro 100 /Series 3 ® /Series 4 ® , VersiPower ® Plus J.48 

C8804 Blade, Saw, Free-Hand, MicroChoice ® /Micro 100 J.48 

5050-060 C-Serter ® Kit, 220 - 240 Vac J.18 

5050-061 C-Serter Transformer, 220 - 240 Vac J.18 

5050-033 C-Serter, Battery Charger J.18 

5050-035 C-Serter, Battery, Ni-Cad, non-sterile J.18 

5050-020 C-Serter, Handpiece, stainless steel/aluminum, with battery, non-sterile J.18, J.71 

5050-021 C-Serter, Introducer Sleeve J.18 

5050-028 C-Serter, Power Pack J.18 

5050-027 C-Serter, Power Pack -Original Handpiece J.18 

5050-026 C-Serter, Sterilization Case J.18 

5050-037 C-Serter, Storage Case, aluminum J.18 

5050-031 C-Serter, Transformer, plastic, non-sterile J.18 

5050-010 C-Serter Kit, 100 - 120 Vac J.18 

5050-042 C-Wire Spade Tip, .86mm dia., 5 inch length, sterile .89mm J.71 







5050-041 C-Wire Spade Tip, .7mm dia., 5 inch length, sterile J.71 

E9000J E9000, Console, with Cord, 100 volt J.7 

E9000 E9000, Console, with Cord, 115 volt J.7, J.8, J.9, J.13, J.28, J.30 

E9000G E9000, Console, with Cord, 220 volt J.7 

1375-028 Micro 100 Foot Control, non-sterile J.21 

5053-009 Micro 100, Handpiece, Drill, without hose J.15, J.16, J.32 

5053-012 Micro 100, Handpiece, Oscillator Saw, without hose J.16, J.60, J.63 

5053-022 Micro 100, Handpiece, Oscillator Saw, x-long, without hose J.16 

5053-010 Micro 100, Handpiece, Reciprocating Saw, without hose J.16, J.67 

5053-011 Micro 100, Handpiece, Sagittal Saw, without hose J.16, J.45, J.48, J.49, J.50 

5053-013 Micro 100, Handpiece, Wiredriver, without hose J.16, J.28 

5053-061 Micro 100/Micro E (only) Oscillating Blade, 10.0 x 12.0mm, non-sterile J.63 











5053-048 Micro 100/E (only) Oscillating Blade, 70º angled, thick extend, non-sterile J.64 

5053-083 Micro 100/E (only) Reciprocating Rasp, large, cross cut, sterile, 6.5 x 12.5mm J.68 

5053-085 Micro 100/E (only) Reciprocating Rasp, large, intramedullary, non-sterile, 62.2 x 30.5 x 9.5mm J.68 

5053-081 Micro 100/E (only) Reciprocating Rasp, large, straight cut, sterile, 6.5 x 12.5mm J.68 

5053-082 Micro 100/E (only) Reciprocating Rasp, small, cross cut, sterile, 5.5 x 9.5mm J.68 

5053-084 Micro 100/E (only) Reciprocating Rasp, small, intramedullary, non-sterile, 54.6 x 24.5 x 5.3mm J.68 

5053-080 Micro 100/E (only) Reciprocating Rasp, small, straight cut, sterile, 5.5 x 9.5mm J.68 














5053-034 Micro 100/E (only) Sagittal Blade, 90º angled 5.5 x 9.0mm, non-sterile J.51 








5053-221 Micro 100 /Micro E ® Reciprocating Blade, 38.0 x 4.0mm, sterile J.67 

5053-019 Micro 100/E Wiredriver 100 Chuck Adaptor J.16 

1375-032 Micro 100/E, 20° Angle Attachment, stainless steel, for use on long bur series 5092- J.15, J.33, J.34 

1375-033 Micro 100/E, 20° X-Long Angle Attachment, stainless steel, for use on extra long bur series 5093 J.15, J.32 

1375-036 Micro 100/Mirco E, 90° Angle NSK Attachment, stainless steel, for use on short bur series 5089 and 5090 J.15, J.37, J.38 

1375-035 Micro 100/E, Contra Angle NSK Attachment, stainless steel, for use on short bur series 5089 and 5090 J.15, J.37, J.38 

1375-020 Micro 100/Micro E Laminectomy Bur Guard, stainless steel, overall length 3.4 in. (9.4cm) J.15, J.33 

1375-034 Micro 100/Micro E, Angle Attachment, 70° with Dental Head J.16 

1375-023 Micro 100/Micro E, Cloward X-Long Bur Guard, stainless steel, overall length 3.4 in. (9.4cm) J.15, J.32 

1375-012 Micro 100/Micro E, Medium Bur Guard, stainless steel, overall length 1.8 in. (4.57cm) J.15, J.35, J.36 

1375-021 Micro 100/Micro E, Rhinoplasty Bur Guard, stainless steel, overall length 3.4 in. (8.71cm) J.15, J.34 

1387-022 Micro 100/Micro E, Tissue Retractor Guard, non-sterile J.15, J.33 

5053-040 Micro 100/Micro E (only) Sagittal Blade, 9.5 x 41.0mm, non-sterile J.51 

5023-268 Micro Blade, 20° Angled Oscillating, 10 x 13 x 0.4mm, can be used with MicroChoice ® , Micro 100 and Micro E, sterile J.61 

5023-259 Micro Blade, 20° Angled Oscillating, 10 x 13.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 

5023-258 Micro Blade, 20° Angled Oscillating, stainless steel, 10.0 x 9 x 0.4mm, can be used withMicroChoice, Micro 100 and Micro E, sterile J.61 

5023-267 Micro Blade, 20° Angled Oscillating, stainless steel, 5.5 x 13 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 

5023-057 Micro Blade, Abrader, lateral, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.46 

5023-056 Micro Blade, Abrader, medial, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.46 

5023-055 Micro Blade, Abrader, straight, diamond coated, 25.0 x 6.3 x 3.8, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.46 






5023-406 Micro Blade, ACL, Graft Harvesting, stainless steel, graft length 20mm, graft width 6mm, sterile, can be used with MicroChoice, Micro 100 and Micro E, sterile J.49 




5023-282 Micro Blade, ACL, stainless steel, 19 x 41 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.48 


5023-186 Micro Blade, ACL, stainless steel, 8.5 x 38 x .4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.48 


5023-284 Micro Blade, ACL, stainless steel, 9.5 x 41.0 x 0 .4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.48 

8703 Micro Blade, ACL/PCl, 9.5 x 25/5 x 0.4mm J.48 

C8904 Micro Blade, ACL/PCl, 9.4 x 40.9 x 0.38 x 12.0 x 0.6mm J.48 

C8902 Micro Blade, ACL/PCl, 9.5 x 25/5 x 0.4mm J.48 






5023-171 Micro Blade, Crescentic, stainless steel, 13.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 

5023-176 Micro Blade, Crescentic, stainless steel, 13.5 x 32 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.61 



5053-360 Micro Blade, MicroAire Replacement, 1200-001, straight 12.0 x 20mm, sterile J.57 



5053-363 Micro Blade, MicroAire Replacement, 1200-008, angled, 8.0 x 22mm, sterile J.57 


5053-370 Micro Blade, MicroAire Replacement, 1400-001, 25mm, sterile J.70 


5023-101 Micro Blade, Oscillating, Intra-Oral, stainless steel, 11.5 x 7 x 0.4mm, sterile J.62 

5023-104 Micro Blade, Oscillating, Intra-Oral, stainless steel, 5 x 12 x 0.4mm, sterile J.62 







5023-260 Micro Blade, Oscillating, stainless steel, fine, flat, 5.5 x 12 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.60 


5023-264 Micro Blade, Oscillating, stainless steel, fine, flat, 5.5 x 28.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E , sterile J.60 


5053-020 Micro Blade, Reciprocating, flat, stainless steel, 25.5 x .4mm, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.67 


5053-021 Micro Blade, Reciprocating, flat, stainless steel, 38 x .4mm, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.67 

5053-126 Micro Blade, Reciprocating, Non-Depth Limiting, round shank, 28 x .6mm, stainless steel, can be used with MicroChoice, Micro 100 and Micro E, sterile J.67 





5053-052 Micro Blade, Reciprocating, round shank, 23 x 5mm stainless steel, can be used with MicroChoice ® , Micro 100 and Micro E ® , non-sterile J.67 



5053-054 Micro Blade, Reciprocating, vertical osteotomy, round shank, 25 x 8mm stainless steel, can be used with MicroChoice, Micro 100 and Micro E, non-sterile J.67 







5044-145 Micro Blade, Sagittal, stainless steel, fine, flat, 10.0 x 18.5.0 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.46 








5023-218 Micro Blade, Sagittal, stainless steel, fine, radial, 9.5 x 25.5 x 0.4mm, can be used with MicroChoice, Micro 100 and Micro E, sterile J.45 





























5092-236 Micro Bur, oval carbide, 4.0 x 8mm, long, sterile J.8, J.15, J.33 

5092-238 Micro Bur, oval carbide, 5.5 x 10mm, long, sterile J.33 

5092-270 Micro Bur, oval diamond, 4 x 8mm, long, sterile J.34 

5091-270 Micro Bur, oval diamond, 4 x 8mm, medium, sterile J.36 

5093-236 Micro Bur, oval, carbide, 8 flutes, 4.0 x 8.0mm, x-long, can be used with MicroChoice, Micro 100, Micro E, Surgitome E ® and Surgairtome Two ® Drills, sterile J.32 































5092-274 Micro Bur, Rhinoplasty diamond, 2.0 x 19mm, long, sterile J.15, J.34 












5089-220 Micro Bur, round carbide, 1.0mm, sterile J.37 









5092-291 Micro Bur, round cylindrical, 3.0mm, sterile J.34 

5090-291 Micro Bur, round cylindrical, M-8 type, 3.0mm, short, sterile J.37 

5093-291 Micro Bur, round cylindrical, M-8 type, 3.0mm, x-long, sterile J.32 

5092-292 Micro Bur, round cylindrical, M-8 type, 4.0mm, long, sterile J.34 













5093-230 Micro Bur, round, carbide, 10 flutes, 5.0mm, x-long, can be used with MicroChoice ® , Micro 100 , Micro E ® , Surgitome E ® and Surgairtome Two ® Drills, sterile J.32 




5093-221 Micro Bur, round, carbide, 4 flutes, .5mm, x-long, can be used with MicroChoice, Micro 100, Micro E, Surgitome E and Surgairtome Two Drills, sterile J.32 

5093-220 Micro Bur, round, carbide, 6 flutes, 1mm, x-long, can be used with MicroChoice, Micro 100, Micro E, Surgitome E and Surgairtome Two Drills sterile J.32 




5091-212 Micro Bur, side cutting carbide, Lindemann, 1.6 x 31mm, medium, sterile J.35 

5091-219 Micro Bur, side cutting carbide, round, 1.2 x 3.7mm, medium, sterile J.35 










5089-208 Micro Bur, side cutting carbide, straight, 1.5 x 8.0mm, sterile J.37 

5092-203 Micro Bur, side cutting carbide, straight, 1.7 x 12.0mm, long, sterile J.8, J.15, J.33 










5092-206 Micro Bur, side cutting carbide, tapered, 2.0 x 7.5mm, long, sterile J.33 

5090-206 Micro Bur, side cutting carbide, tapered, 2.0 x 7.5mm, short, sterile J.37 

5092-212 Micro Bur, side cutting, 1.6 x 43.7mm, long, Lindemann, sterile J.33 





5090-211 Micro Bur, tapered fissure, 1.2 x 4.5mm, short, sterile J.38 

5090-113 Micro Bur, Tapered Fissure, Short, 2.1 x 4.5mm, #703 J.38 

5090-213 Micro Bur, tapered fissure, short, sterile, 2.1 x 4.5mm J.38 




5088-211 Micro Bur, tapered, fissure, carbide, 1.2 x 4.5mm, can be used with MicroChoice ® , Micro 100 , Micro E ® , Surgitome E ® and Surgairtome Two ® Drills, sterile J.39 





5091-213 Micro Bur, Tapered, Fissure, Medium, 2.1 x4.9mm, #703 J.35 







5092-247 Micro Bur, wire pass steel, 1.0 x 19mm, long, sterile J.33 



5040-125 Micro E, Accessory, Irrigation, Sensor J.29 

5040-120 Micro E, Accessory, Irrigation, Tubing, disposable J.29 

5040-143 Micro E/Miro 100, Accessory, Irrigation, Tip, Reciprocating, reusable J.29 

1375-011 Micro E/Micro 100, Long Bur Guard, stainless steel, overall length 2.7 in. (6.86cm) J.15, J.33, J.34 

5040-142 Micro, Accessory, Irrigation, Tip, Reciprocating, reusable J.29 

5040-110 Micro, Accessory, Irrigation, Tubing J.29 

5020-062 MicroChoice, Bur Guard, x-long, stainless steel, fits 5093 series burs, non-sterile J.8, J.32 

1375-037 MicroChoice Attachment Lubricant J.8, J.9, J.10, J.15, J.16, J.28 

5020-042 MicroChoice Attachment, 1/4" High Torque Jacobs Chuck Attachment, stainless steel, non-sterile J.10 


5020-031 MicroChoice Attachment, 5/32" High Torque Jacobs Chuck Attachment, stainless steel, w/key, non-sterile J.10 


5020-034 MicroChoice Attachment, Dental Implant Head, stainless steel, non-sterile J.9, J.39 

5020-035 MicroChoice Attachment, Dental Implant Screw/Tap Head, stainless steel, non-sterile J.9, J.39 

5020-032 MicroChoice Attachment, Pin Driver, stainless steel, non-sterile J.10 

5020-029 MicroChoice Attachment, Universal Drill, stainless steel, non-sterile J.10 

5020-028 MicroChoice Attachment, Wiredriver, stainless steel, non-sterile J.10 


5020-064 MicroChoice, 20° X-Long Angle Attachment, stainless steel J.8, J.32 

5020-069 MicroChoice, 70° Contra Angle Dental Attachment, stainless steel, non-sterile J.8 

5020-065 MicroChoice, 70° Contra Angle Surgical Attachment, stainless steel, non-sterile J.8, J.37, J.38 


5040-201 MicroChoice, Accessory, Irrigation, External 70 & 90° tip, reusable J.30 

5040-208 MicroChoice, Accessory, Irrigation, extra long tip, reusable J.30 

5040-130 MicroChoice, Accessory, Irrigation, Handpiece Clip, reusable J.30 

5040-203 MicroChoice, Accessory, Irrigation, Internal 70 & 90° tip, reusable J.30 

5040-222 MicroChoice, Accessory, Irrigation, long tip, disposable J.30 

5040-202 MicroChoice, Accessory, Irrigation, long tip, reusable J.30 

5040-220 MicroChoice, Accessory, Irrigation, medium tip, disposable J.30 

5040-206 MicroChoice, Accessory, Irrigation, Oscillating Saw Tip, reusable J.30 

5040-207 MicroChoice, Accessory, Irrigation, Reciprocating Saw Tip, reusable J.30 

5040-205 MicroChoice, Accessory, Irrigation, Sagittal Saw Tip, reusable J.30 

5040-219 MicroChoice, Accessory, Irrigation, Universal Tip, disposable J.30 

5040-228 MicroChoice, Accessory, Irrigation, x-long tip, disposable J.30 

5020-058 MicroChoice, Accessory, Replacement Handpiece Lever J.9 

5020-057 MicroChoice, Accessory, Replacement Safe Slide J.9 

5020-067 MicroChoice, Bur Guard, Laminectomy, stainless steel, non-sterile J.8 

5020-061 MicroChoice, Bur Guard, long, stainless steel, fits 5092 series burs, non-sterile J.8, J.33, J.34 




5020-060 MicroChoice ® , Bur Guard, medium, stainless steel, fits 5091- series burs, non-sterile J.8, J.35, J.36 

5020-068 MicroChoice, Bur Guard, Tissue Retractor, stainless steel, non-sterile J.8, J.33 

5020-025 MicroChoice, Handpiece, High Speed Drill, Electric, stainless steel, non-sterile J.8, J.32 

5020-026 MicroChoice, Handpiece, Low Speed Drill, Electric, stainless steel, non-sterile J.9, J.39 

5020-021 MicroChoice, Handpiece, Medium Speed Drill, Electric, stainless steel, non-sterile J.8, J.32 

5020-024 MicroChoice, Handpiece, Oscillating Saw, Electric, stainless steel, non-sterile J.9, J.60, J.62 

5020-023 MicroChoice, Handpiece, Reciprocating Saw, Electric, stainless steel, non-sterile J.9, J.67 

5020-022 MicroChoice, Handpiece, Sagittal Saw, Electric, stainless steel, non-sterile J.9, J.45, J.48, J.49 

5040-200 MicroChoice, Accessory, Irrigation, medium bur tip, reusable J.30 

1375-003 MicroChoice, Bur Changer, non-sterile J.8, J.16 

E9418 MicroChoice, Tubing Set for irrigation, for E9000 ® /Advantage ® Consoles, sterile J.30 



L4BD Micro-Driver and Minos Bur, long, barrel, oval, diamond for A211, A235 and U211, 4.0x10.0mm, sterile J.42 

L45C Micro-Driver and Minos Bur, long, cone, carbide for A211, A235 and U211, 4.5x12.0mm, sterile J.42 

L17L Micro-Driver and Minos Bur, long, laminectomy side-cutting, carbide for A211, A235, and U211, 1.6x21.9mm, sterile J.41 









L10R Micro-Driver and Minos Bur, long, round, carbide, for A211, A235 and U211, 1.0mm J.41 








L12T Micro-Driver and Minos Bur, long, tapered, side-cutting, carbide for A211, A235, and U211, 1.2 x 9.9mm, sterile J.41 

L20T Micro-Driver and Minos Bur, long, tapered, side-cutting, carbide for A211, A235, and U211, 1.6x21.9mm, sterile J.41 



M45C Micro-Driver and Minos Bur, medium, cone, carbide for A212 and U202, 4.5x12.0mm, sterile J.44 




























M20W Micro-Driver and Minos Bur, medium, wirepass, stainless steel, for A212 and U202, 2.0x6.9mm, sterile J.44 



X45C Micro-Driver and Minos Bur, x-long, cone, carbide for A223, A245 and U212, 4.5x12.0mm, sterile J.40 




















































U200 Micro-Driver, Attachment, Drill, stainless steel, accepts long bur guard (U211), accepts x-long bur guard, (U212), non-sterile J.17, J.43, J.44 

U500 Micro-Driver, Attachment, Oscillating Saw, stainless steel, non-sterile J.17, J.58, J.65 

U700 Micro-Driver, Attachment, Reciprocating Saw, stainless steel, non-sterile J.17, J.69 

U300 Micro-Driver, Attachment, Sagittal Saw, stainless steel, non-sterile J.17, J.52, J.58 

U211 Micro-Driver, Bur Guard, long, stainless steel, non-sterile J.17, J.41, J.42 

U212 Micro-Driver, Bur Guard, x-long, stainless steel, non-sterile J.17, J.40 


L10D Micro-Driver and Minos Bur, long, round, diamond, for A211, A235 and U211, 1.0mm J.42 


U100 Micro-Driver, Handpiece, Pneumatic, stainless steel/aluminum J.13, J.17, J.40, J.41, J.43, J.52, J.58, J.65, J.69 

D522 Mini/Maxi-Driver, Accessory, Cruciate Bit for K112, L112, G112, for Screwdriver D520 J.22 

D525 Mini/Maxi-Driver, Accessory, Hex Bit for Screwdriver D524 J.22 

D523 Mini/Maxi-Driver, Accessory, Phillips Bit for K112, L112, G112, for Screwdriver D520 J.22 

D520 Mini/Maxi-Driver, Accessory, Screwdriver for K112, L112, G112 with choice of one bit J.22 

D521 Mini/Maxi-Driver, Accessory, Slotted Bit for K112, L112, G112 for Screwdriver D520 J.22 






































M334 Mini-Driver Electric Handpiece Cord, 15' J.13 

K109 Mini-Driver, Attachment, 1/4" Jacobs Chuck, stainless steel, non-sterile J.13 

K114A Mini-Driver, Attachment, AO/ASIF Twist Drill Chuck, non-sterile J.14 

K211 Mini-Driver, Attachment, Automatic Pin Driver, stainless steel, non-sterile J.14 

K111A Mini-Driver, Attachment, Automatic Wire Driver, stainless steel, non-sterile J.14 

K113 Mini-Driver, Attachment, Hudson Chuck, stainless steel, non-sterile J.14 

K120 Mini-Driver, Attachment, Sagittal Saw, stainless steel, can only be used with pneumatic handpiece, non-sterile J.13, J.54 

K220 Mini-Driver, Attachment, Sagittal Saw, stainless steel, non-sterile J.14, J.55 

K110 Mini-Driver, Attachment, Small Jacob Chuck, stainless steel, non-sterile J.13 

K112 Mini-Driver, Attachment, Trinkle, stainless steel, non-sterile J.14 

K210 Mini-Driver, Attachment,1/4 in. High-Torque Jacobs Chuck, stainless steel, non-sterile J.13 

K200 Mini-Driver, Handpiece, Pneumatic, stainless steel, non-sterile J.13, J.14, J.17, J.54 

D524 Mini-Driver/Maxi-Driver , Accessory, Screwdriver with Hex Bit D525 J.22 

PRO2038 PowerPro ® Battery AO Small Attachment J.12 

PRO6100 PowerPro Electric II Modular Handpiece J.11 

PRO2042 PowerPro, Attachment, 1/4" High Torque Jacobs Chuck J.12 





PRO2043 PowerPro, Attachment, Sagittal Saw J.12 

PRO2029 PowerPro, Attachment, Trinkle/AO J.12 

PRO2000I PowerPro, Console, Electric, 230V J.7 

PRO6028 PowerPro, Electric II, Attachment, Wire Driver J.11 

PRO2000 PowerPro, Console, Electric, 115V J.7 

PRO6032 PowerPro, Electric II, Attachment, Pin Driver J.11 

5067-002 Series 4 ® , Handpiece, Oscillating Saw, Pneumatic, without hose J.48 

T210 Staplizer ® , Accessory, Autoclave Case J.20 

T301 Staplizer, Accessory, Disassembly Punch Removal Tool J.20 





T121 Staplizer, Accessory, Pry J.20 

T122 Staplizer, Accessory, Seater J.20 

T123 Staplizer, Accessory, Width Gauge J.20 





















T100 Staplizer, Handpiece, Pneumatic, stainless steel/aluminum J.19, J.72 

5057-040 Sternum Saw, Handpiece, Repeat Sternotomy Saw, without hose J.16 

5058-001 Surgairtome Two ® , Handpiece without Hose J.15 


Notes 


Notes 


11311 Concept Boulevard, Largo, Florida 33773-4908 

Phone: (727) 392-6464 

Customer Service: (800) 237-0169 

USA Fax: (727) 399-5256 

International Fax: (727) 397-4540 

www.linvatec.com 

©2001, 2003 Linvatec Corporation, All rights reserved. 

10/03 CCA 9017 Rev. 1

Micro Sagittal Saw Blades

Create successful ePaper yourself

Delete template?

Save as template?