BFT CATALOGUE - May 2010

EELINK is an exclusive programming
system developed
by BFT which, by means of
connection to handheld programmers
(unipro, uniradio
and Proxima) makes it possible
to transfer data from operators
to PCs and vice versa.
As a result, it is possible to
keep a database (EEdbase) of
the information memorized
in the installed systems. The
database also makes it possible
to associate personal parameters
with every system:
name and surname of the
proprietor, address, telephone
number, name of the maintenance
engineer, name of the
owner of the radio control device,
etc., facilitating the management
of customers and
preventive maintenance, for
example.
Furthermore, potentially complex
functions such as the
reconfiguration of the control
panel or of the radio receiver
in the event of replacement, or
the configuration of a control
panel starting from a standard
or customized configuration,
become much simpler with
EElink as it is only necessary
to press a few keys.
version 3 of EEdbase supports
many functions for the Compass
access control systems.
Information managed by
EElink for the control panels
• Operational parameters:
work times, automatic closing
time, phase displacement
time, slowdown, torques, antisquashing
sensitivity.
• Operating statistics: number of
manoeuvres, number of mano-
7
euvres since the last maintenance,
date of the last maintenance,
identification of the terminal that
carried out the maintenance,
name of the system and version
of the software installed in the
control panel.
• self-diagnostic: in the state of
rest, the control panel carries out
a check of the state of all the inputs
connected to it and, if any of
them are in any state other than
rest, this is communicated to the
handheld programmer.
• Default configuration: EElink
makes it possible to restore all
the control panel configurations
to the original factory default states
with one single command.
EElink for the radio receivers
• receiver capacity: number of
transmitters the receiver can
memorize.
EELINK PrOTOCOL
• Configuration of the outputs:
monostable, bistable, timed.
• system code: makes it possible
to create clones of the memorized
radio control devices
and manage installations comprising
many receivers.
• List of the memorized transmitters,
their position in the
memory and association between
the receiver’s keys and outputs.
Information managed by EElink
for the radio transmitters
• serial number of the transmitter.
• second rolling code cipher key.
• system code (for clones)