BFT CATALOGUE - May 2010

ACCESSoRIES
DCW - CEllUlA 180
DCW
The rotatable dCw photocell safety edge solves all sliding
gate safety problems quickly and effectively.
it provides an infrared safety edge, or one or more
resistive safety edges, thanks to the transmitter that
runs off a long-life battery, thus eliminating connection
problems between the moving leaf and automation
device.
it can be rotated 180° horizontally and 20° vertically by
virtue of the adjustable internal head.
by fitting the transmitter at the top outer edge of the
leaf and the receiver on the pillar the gate closes
against, you can have a single device acting as both a
photocell and safety edge.
meets European standard En12978.
T-BoX - RB
T-BoX
security and ease of installation, no matter where.
Thanks to the 433mhz wireless technology, the
T-bOX digital keypad controls your bfT receiver
without the need for a hardwired connection. The
keypad is backlit to provide utmost visibility in the
dark, while the twilight sensor switches off backlighting
during the day for very long battery life.
The possibility of managing up to 100 codes on 10
different channels offers unbeatable flexibility with
the option of selecting different users on the various
different entrances.
MITTo REPlAY
MITTo REPlAY
Copyable 433 mhz rolling code two/four-channel
12v transmitter. it enables to clone miTTO transmitters
(see instructions manual for further
info).
THERMo
THERMo
heating electric resistance to be installed inside the
barrier case right on the gear box in case of outer
temperature down to -40°C.
it features a thermostat (adjustable on a din rail
included in the package) which enables the manual
setting of the starting temperature and a high level
CloNIX 4 RTE
CloNIX 4 RTE
multifunctional four-channel receiver.
The use of 4 power relays (16A) - either
pulse, timed or step - makes it ideal for
auxiliary applications such as the remotecontrolled
switching on of lights, and the
remote activation of alarms or watering
systems.
The built-in wiegand interface makes it
possible to have a direct connection with
devices such as COmPAss sLim and sE-
LETTO.
The 230V supply means it can be used in
any installation situation.
84
CEllUlA 180
Using CELLULA 180 makes the job of installing photocells
extremely quick. with the beam being able to
rotate 180° horizontally and 20° vertically, there is no
need to use brackets or mounting posts when the gate
is installed flush with the pillars.
Perfect alignment is always easy to achieve by observing
the strength of the relevant LEd or by measuring
the voltage of the pads on the receiving photocell.
RB
Transmitter for interior use (tabletop or wallmounted)
sporting a captivating design. it can control
up to four automated devices separately.
efficiency by saving electric power.
To be used with both moovi and michelangelo versions.