accessories sensor tester 2000 - IPF Electronic GmbH
accessories sensor tester 2000 - IPF Electronic GmbH
accessories sensor tester 2000 - IPF Electronic GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
design 72 x 120 x 30mm<br />
<strong>sensor</strong> <strong>tester</strong> output voltage 18V DC<br />
� for all 2-wire and 3-wire <strong>sensor</strong>s with a<br />
current consumption of up to 40mA max.<br />
� output voltage 18V DC<br />
� connection of NPN and PNP devices<br />
� LED display for all essential functions<br />
<strong>sensor</strong> test and adjustment<br />
without voltage supply<br />
description<br />
A green LED indicates that the proximity switch has been<br />
connected correctly. When an object is detected, the <strong>sensor</strong><br />
<strong>tester</strong> emits both an optical and an acoustic acknowledging<br />
message. A red LED “Battery” warns that the battery voltage<br />
is insufficient. Then the batteries must be replaced.<br />
A “NPN” LED lights up for <strong>sensor</strong>s that make the negative<br />
pole become conductive.<br />
A “PNP” LED lights up for <strong>sensor</strong>s that make the positive pole<br />
become conductive.<br />
For any <strong>sensor</strong> with an LED status display that is connected<br />
ipf electronic gmbh Kalver Straße 27<br />
D-58515 Lüdenscheid<br />
Fon +49 (0) 2351 / 9365-0<br />
Fax +49 (0) 2351 / 936519<br />
<strong>accessories</strong><br />
<strong>sensor</strong> <strong>tester</strong> <strong>2000</strong><br />
after the output stage – e.g. in the cable socket – a current<br />
will flow in the not-switched state of the <strong>sensor</strong>.<br />
This current is the reason why the “PNP” LED lights up for<br />
NPN-<strong>sensor</strong>s and the “NPN” LED lights up for PNP-<strong>sensor</strong>s.<br />
The <strong>sensor</strong> type is characterized by the LED in the switched<br />
state.<br />
application<br />
� testing and adjusting of <strong>sensor</strong>s<br />
www.ipf-electronic.com<br />
E-Mail: info@ipf-electronic.com<br />
Subject to alteration!<br />
Version: January 2011<br />
1
2<br />
<strong>accessories</strong><br />
<strong>2000</strong> <strong>sensor</strong> <strong>tester</strong><br />
article-no. VY000004<br />
output voltage 18V DC<br />
output current (I nominal) 20mA<br />
TECHNICAL DATA<br />
output voltage 18V DC<br />
output current (I nominal) 40mA<br />
display (operation) 1 x green LED<br />
display (alarm) 1 x red LED<br />
display (signal) PNP / NPN, each 1 x yellow<br />
design 72x120x26mm<br />
housing material plastic<br />
operating temperature 0 … +50°C<br />
system of protection (EN 60529) IP 20<br />
connection terminals<br />
Warning: Never use these devices in applications where the safety of a person depends on their functionality.<br />
ipf electronic gmbh Kalver Straße 27<br />
D-58515 Lüdenscheid<br />
Fon +49 (0) 2351 / 9365-0<br />
Fax +49 (0) 2351 / 936519<br />
www.ipf-electronic.com<br />
E-Mail: info@ipf-electronic.com<br />
Subject to alteration!<br />
Version: January 2011
Change language