Kabel und Leiter - Ersel-eng.com

Winding wires
Windungsdrähte
Application: for manufacturing of windings of oil-resistant
compound-wound electric motors with lacquer
impregnation
Construction
Copper wire with rectangular cross-section,
0,16 mm thick insulation of polyimide-fl uoroplast
fi lm
Copper wire with rectangular cross-section,
0,23 mm thick insulation of polyimide-fl uoroplast
fi lm
Copper wire with rectangular cross-section,
0,30 mm thick insulation of polyimide-fl uoroplast
fi lm
Copper wire with rectangular cross-section,
0,35 mm thick insulation of polyimide-fl uoroplast
fi lm
Technical
specifi cation
TU 16.К71.202-93
TU 16.К71.202-93
TU 16.К71.202-93
TU 16-705.035-82
Application: for winding of stators of submersible
water-fi lled compound-wound or impregnated electric
motors.
Construction
Copper wire, insulation of fl uoroplast-4 tape
and single-sided polyimide-fl uoroplast fi lm.
Technical
specifi cation
Diameters
(dimensions)
range
On the side «a» – (1,12-4,00)
mm; on the side «b» – (3,35-
11,20) mm
On the side «a» – (1,12-4,00)
mm; on the side «b» – (3,35-
11,20) mm
On the side «a» – (1,12-4,00)
mm; on the side «b» – (3,35-
11,20) mm
On the side «a» – (1,12-4,50)
mm; on the side «b» – (3,35-
16,00) mm
Diameters
(dimensions)
range
TU 16-505.638-76 (1,70–3,15) mm
Kabel und Leiter
Technical properties
Т.I. 200°С.
Ubr. of insulation between sections
no less than 2500 V
Т.I. 200°С.
Ubr. of insulation between sections
no less than 3000 V
Т.I. 200°С.
Ubr. of insulation between sections
no less than 4000 V
Т.I. 200°С.
Ubr. of insulation between sections
no less than 5000 V
Technical properties
Working temperature from
- 60°С to 180°С.
Uw. Up to 380 V
87