Accurate Exhaust Gas Temperature Reading - Donaldson Company ...

Enhanced LNF and LXF Muffler maintenance
Upgraded Monitoring System and Technician Tool
Emissions Device Monitor (EDM) Emissions Device Monitor - Item No. X007813
The Donaldson EDM is a key component of Donaldson
DPF systems as it records and monitors device
operating conditions. Temperature and backpressure
readings are continuously recorded to aid in
analyzing vehicle operating trends and to support
troubleshooting. The EDM sends alerts to the vehicle
operator via the In-Cab Display when abnormal or
undesirable operating conditions are detected.
An EDM Kit is included
with every LNF and LXF
Muffler Kit.
Sensor Harness
Stainless Steel Braided Hose with
Threaded Couplings
50 ft. Sensor Harness
(ideal for rear engine vehicles)
Part No. P231739
50 ft. Display Extension Harness
(ideal when SECM is mounted in rear of vehicle)
Part No. P236736
Small Electronic Control
Module (SECM)
In-Cab Lighted
Display
Optional Parts
(sold separately)
50 ft. Dual Temp Sensor Harness
(ideal for "dual temp" rear engine vehicles)
Part No. P236776
4 ft. Temp Sensor Extension Harness
(ideal when the temperature sensor needs to be
mounted more than 4 ft from pressure sensor)
Part No. P236497
The upgraded monitor system includes the following:
• Enhanced In-Cab Display
• Removable memory module that holds up to 500
hours of data and faults to support troubleshooting
• DPF temperature monitoring
• Convenient push button fault resetting with the
DRT (sold separately)
• Optional voltage converter 24V to 12V
• Optional technician tools
Installation, Operation
and Maintenance
Manual
Main Harness for
SECM
Pressure Transducer and
Temperature Sensor on Mounting
Bracket
24-12V DC Converter
Part No. P232038
Technician
Service Tools
(sold separately)
Diagnostic Reset Tool (DRT)
Part No. P231740
Service Tool Link-up Cable
Part No. X007999
Diagnostic Reset Tool &
Link-up Cable
Part No. X009649
Donaldson LXF & LNF Mufflers 5