Accessories - Donaldson Company, Inc.

More documents

Recommendations

Info

ACCESSORIES Reservoir <strong>Accessories</strong> ARV Active Reservoir Vent ARV Active Reservoir Vent Ordering ARV 3 cfm: P568790 10 cfm: P568791 Specifications ARV Part Number Flow Rate (scfm /lpm) ARV Kit ** Breather Assembly Recommended for Reservoir Size (gallons/liters) Replacement/Maintenance Parts & Schedule ARV Kit* P568793 * The ARV Kit includes the T.R.A.P. breather assembly, connection tee and relief vent. Part Number Flow Rate (scfm) Recommended for Reservoir Size (gallons/liters) NPTM Connection (inches) T.R.A.P. Breather Assembly (in./mm) Height Width Depth P568793 up to 10 up to 9,000 / 34,049 1 9 / 229 6.5 / 165 4.5 / 120 ** Kit includes breather assembly, connection and relief vent. NPTF Connection (inches) Description Recommended Change Interval Part Number T.R.A.P. reservoir breather 6 months P564669 Service Kit (includes prefilter element, afterfilter element, desiccant cartridges, set of seals) for ARV adsorption dryer 1 year Dimensions (in./mm) Weight (lbs/kg) Height Width Depth P568790 3 / 85 up to 2,700 / 10,271 1/2" 13.7 / 348 11.8 / 300 4.7 / 120 15 / 6.8 P568791 10 /283 up to 9,000 / 34,069 1/2" 34.8 / 884 11.8 / 300 4.7 / 120 33 / 14.9 • Electrical Requirements: 110 V/50-60 Hz AC, Approx. 4 W • Medium: Compressed air/nitrogen • Operating Pressure: 60 to 100 psig • Medium Temperature: maximum = 122°F • Ambient Temperature: minimum =39°F; maximum = 122°F ARV-3: P568796 ARV-10: P568797 278 • Hydraulic Filtration www.buydonaldson.com
How the Active Reservoir Vent Works Small, Compact Point-of-Use Dryers Heatless desiccant dryers, like all adsorption type dryers, use a desiccant to adsorb the water vapor in the airstream. In the most commonly used twin-tower design, one tower dries the air from the compressor, while the desiccant in the other tower is being regenerated to provide continuous operation. In the heatless desiccant dryer design, no internal or external heaters are used. Regeneration is achieved by using a partial stream of the dried air, expanding it to atmospheric pressure, and running it through the desiccant bed that is being regenerated. The standard regenerative desiccant dryer at 100 psig has a standard pressure dew point rating of -40°F/°C and a dew point down to -100°F (-73°C) is available as an option. www.buydonaldson.com 5 6 4 3 9 7 2 8 1 1 2 3 4 5 6 7 8 9 Reservoir <strong>Accessories</strong> ARV Active Reservoir Vent Dryer Inlet Processor Control Prefilter Lower Shuttle Valve Desiccant Cartridges Upper Shuttle Valve Afterfilter Dryer Outlet Condensate Drain Hydraulic Filtration • 279 ACCESSORIES
Page 1 and 2: Accessories Donaldson offers an ext
Page 3 and 4: Electrical Filter Service Indicator
Page 5 and 6: In-Line Pressure Gauges Specificati
Page 7 and 8: 4" Diameter Gauges Stem Mount Panel
Page 9 and 10: TPM/TPP-1215 Assembly Views M12x1.5
Page 11 and 12: Test Point Hose Assemblies Specific
Page 13 and 14: In-Line Check Valve Options www.buy
Page 15 and 16: Ball Valves - Medium/High Pressure
Page 17 and 18: Three-Way Selector Ball Valve Speci
Page 19 and 20: Blanking Flanges Specifications •
Page 21 and 22: 4-Bolt NPTF Threaded Flange Code 61
Page 23 and 24: Flat Socket Weld Flange Specificati
Page 25 and 26: Suction Strainers Pressure Drop (PS
Page 27 and 28: Tank Mounted Strainers Flow Range:
Page 29 and 30: Breathers Breathers are available i
Page 31 and 32: Self-Regenerating T.R.A.P. Breather
Page 33 and 34: ABS, MBS Series Specifications •
Page 35 and 36: Filler Breather Caps Specifications
Page 37 and 38: ABB Series Filler Breathers - Bayon
Page 39 and 40: Mini Filler Breather Airflow Donald
Page 41 and 42: PBB Series Pressure Filler Breather
Page 43: ARV Active Reservoir Vent The Don
Page 47 and 48: Sight Glasses Specifications • Tr
Page 49 and 50: Fluid Level Gauges Specifications
Page 51 and 52: Fluid Level Gauges Specifications N

Accessories - Donaldson Company, Inc.

Create successful ePaper yourself

Delete template?

Save as template?