KOMFLEX OVAL SYSTEM - Pichler
KOMFLEX OVAL SYSTEM - Pichler
KOMFLEX OVAL SYSTEM - Pichler
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Comfort Ventilation<br />
<strong>KOMFLEX</strong><br />
<strong>OVAL</strong><br />
<strong>SYSTEM</strong><br />
Air for living.
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 2<br />
Product description<br />
Oval ventilation pipe in the insulating lawyer<br />
between the concrete level and screed<br />
Benefits at a glance!<br />
Tunnel profile sketch<br />
The oval ventilation pipe (tunnel<br />
geometry) 133 x 52 mm is used as a<br />
flexible supply air and extract air pipe<br />
in buildings for regulated apartment<br />
ventilation.<br />
Installation in the insulating layer between<br />
the concrete level and screed is preferred<br />
(see figure). However, it is not suitable<br />
for setting in concrete in bare concrete<br />
surfaces! The oval ventilation pipe is<br />
suitable for a temperature range of -20 °C<br />
to approx. +60 °C<br />
Standard delivery length: 1 roll = 20 linear<br />
metres (lfm)<br />
The 20 lfm roll is sealed with end plugs,<br />
individually packaged in a foil bag and<br />
stored in halls with UV protection.<br />
The flexible tunnel pipe consists of<br />
physiologically and toxicologically safe<br />
polyethylene, which is corrugated on the<br />
outside and has a smooth finish on the<br />
inside. The polyethylene (PE) used is a<br />
�����������������������������������<br />
���������������������������<br />
�����������������������������������<br />
������������������������������<br />
���������������������������������������<br />
�������������<br />
����������������������������������������<br />
�������������������������������<br />
���������������<br />
new good without recycling supplements<br />
and is provided with a silver-bearing<br />
additive that prevents the development<br />
and spreading of fungus and bacteria. The<br />
inner pipe is provided with an antistatic<br />
compound.<br />
The pipe is blue on the outside and<br />
transparent on the inside. At an air speed<br />
of 3 m/sec, the air volume flow is 45<br />
m³/h.<br />
N.B.: Hose lengths of approx. 15 m may<br />
not be exceeded when cleaning, otherwise<br />
appropriate access options (cleaning<br />
boxes) must be provided!
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 3<br />
Example assembly<br />
Oval suction recess<br />
for wall-mounting<br />
08SNW125100<br />
Oval connecting piece for ceiling<br />
mounting 08SN125350<br />
Round to oval transition<br />
08UEROV160<br />
Bottom valve TV1<br />
10TV1<br />
Front plate with round perforations<br />
08FAWAFR290180 and<br />
mounted hit-and-miss damper<br />
08FAWASS290180M<br />
Connecting box for<br />
bottom valve<br />
10TV1KOV13352<br />
Junction 90° TCP PU<br />
11TCPU160160<br />
Connecting box for<br />
flooring outlet<br />
08FAAKOV13352<br />
Plastic sshallow duct Oval<br />
08<strong>KOMFLEX</strong>OV<br />
Oval flat silencer<br />
08FSDOV500<br />
Shallow duct Oval connector<br />
08NPUOV<br />
Oval flat silencer<br />
08F 8F 8 SDOV1200<br />
Female coupling<br />
11MF0160<br />
Oval 90° system bend<br />
(horizontal)<br />
08BOV90F<br />
Oval 90° system<br />
bend (vertical)<br />
08BOV90ST<br />
6x x splitter<br />
08VK620050<br />
3x ssplitter<br />
08VK320050<br />
End cap MF-size<br />
Oval shallow duct<br />
08EPFOV<br />
Juncti ti t on 90° TCPU<br />
11TCPU160160<br />
Transfer from spiral duct to<br />
shallow duct<br />
08UESR16050200
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 4<br />
Oval shallow duct layout sketch (wall, floor or ceiling mounting)<br />
Product description<br />
�����������������<br />
���������������������������<br />
�������������������������<br />
��������������������������<br />
1 roll = 20 lfm<br />
Technical specifications<br />
PRESSURE LOSS DIAGRAM 10 Pa<br />
Pressure loss [Pa]<br />
132,3<br />
121,8<br />
�����������������������<br />
8 Pa<br />
6 Pa<br />
4 Pa<br />
2 Pa<br />
41,9<br />
0 Pa<br />
0 m³/h 10 m³/h 20 m³/h 30 m³/h 40 m³/h 50 m³/h 60 m³/h 70 m³/h<br />
Volume flow [m³/h]<br />
Shallow duct per 1 lfm<br />
52,5
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 5<br />
Oval 90° (horizontal) system bend layout sketch<br />
92<br />
180<br />
Oval 90° (vertical) system bend layout sketch<br />
180<br />
134<br />
86<br />
52
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 6<br />
Oval 90° system bend product description<br />
�����������������<br />
�������������������������<br />
���������������������������������<br />
��������������������������������<br />
Technical specifications<br />
PRESSURE LOSS DIAGRAM<br />
Bend / Elbow 90 °<br />
Oval shallow duct connector layout sketch<br />
Product description<br />
�����������������<br />
�������������������������<br />
�������������������<br />
Pressure loss [Pa]<br />
40 Pa<br />
35 Pa<br />
30 Pa<br />
25 Pa<br />
20 Pa<br />
15 Pa<br />
10 Pa<br />
5 Pa<br />
0 Pa<br />
0 m³/h 10 m³/h 20 m³/h 30 m³/h 40 m³/h 50 m³/h 60 m³/h 70 m³/h<br />
Horizontal Vertical<br />
Volume flow [m³/h]<br />
bend<br />
bend<br />
131<br />
80<br />
50
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 7<br />
Oval shallow duct end cap layout sketch<br />
Product description<br />
�����������������<br />
�������������������������<br />
������������������<br />
Product description<br />
�����������������<br />
�������������������������<br />
�������������������<br />
52 ± 0,3<br />
145,65 ± 0,5<br />
124 05<br />
Oval shallow duct end cap MF size layout sketch<br />
0,35<br />
124 ± 0,5<br />
119 ± 0,5<br />
146<br />
3,6<br />
9,3<br />
150<br />
37 ± 0,5<br />
17<br />
52
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 8<br />
3 x splitter layout sketch<br />
Product description<br />
������������������������������<br />
3 x 133 x 52 mm<br />
����������������������<br />
Technical specifications<br />
PRESSURE LOSS DIAGRAM<br />
CAUTION! Pressure loss diagram only<br />
applies if all 3 connections are open!<br />
Pressure loss [Pa]<br />
18 Pa<br />
16 Pa<br />
14 Pa<br />
12 Pa<br />
10 Pa<br />
8 Pa<br />
6 Pa<br />
4 Pa<br />
2P 2 Pa<br />
0 Pa<br />
510<br />
50<br />
200<br />
200<br />
266<br />
55<br />
Volume flow [m³/h] ³
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 9<br />
6 x splitter layout sketch<br />
Product description<br />
��������������������������������<br />
�����������������������������<br />
6 x 133 x 52 mm<br />
����������������������<br />
Technical specifications<br />
PRESSURE LOSS DIAGRAM<br />
Pressure loss [Pa]<br />
50 Pa<br />
CAUTION! Pressure loss diagram only<br />
45 Pa<br />
applies for one connection! 40 Pa<br />
35 Pa<br />
30 Pa<br />
25 Pa<br />
20 Pa<br />
15 Pa<br />
10 Pa<br />
5 Pa<br />
725<br />
650<br />
50<br />
200<br />
0 Pa<br />
0 m³/h 10 m³/h 20 m³/h 30 m³/h 40 m³/h 50 m³/h 60 m³/h 70 m<br />
Volume flow [m³/h]<br />
Side Face-on<br />
200<br />
266<br />
55
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 10<br />
Oval junction layout sketch<br />
Product description<br />
��������������������������������<br />
����������������������������<br />
�����������������<br />
Flooring outlet layout sketch<br />
Product description<br />
������������������������������������<br />
round perforations<br />
��������������������������<br />
���������������������������������<br />
the front plate<br />
���������������������������<br />
Ø 5<br />
50<br />
260<br />
200<br />
260<br />
225<br />
385<br />
290<br />
�����������������������������������<br />
with oval connection<br />
��������������������������<br />
230<br />
180<br />
107<br />
230<br />
152<br />
55
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 11<br />
Oval flat silencer 500 mm layout sketch<br />
Product description<br />
��������������������������������<br />
���������������������������<br />
����������������������������<br />
Technical specifications<br />
PRESSURE LOSS DIAGRAM<br />
SOUND INSULATION VALUES<br />
300<br />
Pressure loss [Pa]<br />
780<br />
�����������������������<br />
����������������������<br />
25 Pa<br />
20 Pa<br />
15 Pa<br />
10 Pa<br />
5 Pa<br />
1200<br />
1280<br />
300<br />
0 Pa<br />
0 m³/h 10 m³/h 20 m³/h 30 m³/h 40 m³/h 50 m³/h 60 m³/h 70 m³/h<br />
Volume flow [m³/h]<br />
08 08FSDOV500 S O 500<br />
08 08FSDOV1200 S O 00<br />
Damping: 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 8000 Hz<br />
08FSDOV 1200 6 dB 17 dB 22 dB 25 dB 26 dB 27 dB 26 dB 22 dB<br />
08FSDOV 500 2 dB 7 dB 9 dB 10 dB 11 dB 12 dB 11 dB 9 dB<br />
155<br />
55<br />
55
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 12<br />
Oval connecting piece layout sketch<br />
Product description<br />
������������������������������������<br />
ceiling mounting<br />
�����������������������������������<br />
valve Ø 125 mm<br />
����������������������<br />
Technical specifications<br />
PRESSURE LOSS DIAGRAM<br />
Pressure loss [Pa]<br />
30 Pa<br />
25 Pa<br />
20 Pa<br />
15 Pa<br />
10 Pa<br />
5 Pa<br />
Ø 130<br />
200<br />
200<br />
53<br />
0P 0 Pa<br />
0 m³/h 10 m³/h 20 m³/h 30 m³/h 40 m³/h 50 m³/h 60 m³/h 70 m³/h 80 m³/h<br />
Volume flow [m³/h]
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 13<br />
Oval suction recess layout sketch<br />
Product description<br />
������������������������������������<br />
wall mounting<br />
�����������������������������������<br />
valve Ø 125 mm<br />
Product description<br />
��������������������������������<br />
���������������<br />
�����������������<br />
�����������������������<br />
210<br />
Ø 130<br />
Layout sketch of junction box for oval bottom valve TV1<br />
200<br />
240<br />
��������������<br />
��������������������������<br />
240<br />
155<br />
240<br />
200<br />
280<br />
55<br />
100
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 14<br />
Layout sketch of transfer from spiral duct to shallow duct<br />
Product description<br />
�������������������������������<br />
��������������������������<br />
Layout sketch of transfer from angular to round<br />
Product description<br />
��������������������������������<br />
���������������������������<br />
Ø 158<br />
200<br />
Ø 156<br />
200<br />
310<br />
230<br />
50<br />
320<br />
168<br />
310<br />
168<br />
50
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 15<br />
Layout sketch of round to oval transfer Ø 160 to 133 x 52 mm<br />
Product description<br />
���������������������������������<br />
��������������Ø 160 to 133 x 52 mm<br />
����������������������<br />
Female coupling layout sketch<br />
Product description<br />
�������������������������������������<br />
fittings.<br />
��������������������<br />
Ø 160<br />
155<br />
55<br />
Ø 158<br />
360
<strong>KOMFLEX</strong> <strong>OVAL</strong> <strong>SYSTEM</strong> PAGE 16<br />
Fitting connector layout sketch<br />
Product description<br />
��������������������������������<br />
����������� ���������<br />
90° TCPU splitter design sketch<br />
Product description<br />
������������������������<br />
���������������������������������<br />
Version: 05/2012 en/kp<br />
Ø 158<br />
J. PICHLER<br />
Gesellschaft m.b.H.<br />
office@pichlerluft.at<br />
www.pichlerluft.at<br />
230<br />
310<br />
198<br />
AUSTRIA<br />
9021 KLAGENFURT<br />
Karlweg 5<br />
TEL. +43 (0)463 32769<br />
FAX +43 (0)463 37548<br />
60<br />
Ø 158<br />
AUSTRIA<br />
1100 VIENNA<br />
Doerenkampgasse 5<br />
TEL. +43 (0)1 6880988<br />
FAX +43 (0)1 6880988-13<br />
Sales offices in Slovenia, Croatia and Serbia. Sales partners in Germany, Switzerland and Italy.<br />
48