CATC Advisor - Stanley Supply & Services

THE CATC TRACE
Featuring the highly intuitive CATC Trace expert analysis
software, Advisor uses the de-facto standard for documenting
USB protocol. The CATC Trace simplifies the overall debug
process by using collapsible, color-coded schemes to represent
the USB Packet, Transfer and Transaction layers. Sequences
are shown on separate rows with every field labeled and colorcoded.
Errors are identified and highlighted in red.
For more efficient and deeper analysis, users can view Block
Transfers at each layer, view raw data bits and real-time bus
utilization. The CATC Trace also supports vendor specific and
user-defined decoding to ease USB development for developers
looking to implement proprietary commands.
For additional information on the CATC Trace, please
download the White Paper from the CATC website:
http://www.catc.com/support/whitepapers/index.html.
SPECIFICATIONS
Package
Dimensions: 9.2 x 8.4 x 2.5 inches (23.4 x 21.3 x 6.4 cm)
USBTracer & USBTrainer Plug-ins:
4.5 x 6.7 x 1.3 inches (each) (11.3 x 17.0 x 3.2 cm)
Connectors: AC power connection
External clock input (EXT CLK, BNC)
Host connection (USB, type ‘B’)
Data connector (Data In/Out, 9-pin DB)
Weight: 2.8 lb. (1.3 kg)
Power Requirements
90-254 VAC, 47-63 Hz (universal input), 165W maximum
Environmental Conditions
Operating Range: 0 to 55° C (32 to 131° F)
Storage Range: -20 to 80° C (-4 to 176° F)
Humidity: 10 to 90% non-condensing
Switches
Power: on/off
Manual Trigger: when pressed forces a trigger event
Detach Device: when pressed detaches the device from the
classic speed connection
LEDs
Power (PWR): illuminated when the analyzer is powered on
Recording (REC): illuminated when the analyzer is actively recording
traffic data
Triggered (TRG): illuminated during power-on testing and when the
analyzer has detected a valid trigger condition
Uploading illuminated when the analyzer is uploading its
UPLD): recording memory to the host PC for displaying
purposes
Recording Memory Size
128M DRAM for traffic data capture, timing, state and other data
Host PC Software Requirements
Works with any PC equipped with a USB port and
running Microsoft Windows 98SE ® ,
Windows 2000 ® , Windows ME ®, Windows NT 4.0 ®
and Windows XP ®
LeCroy is a global leader in developing, manufacturing, and marketing electronic signal acquisition and analysis products and services.
Protocol Solutions Group
3385 Scott Blvd.
Santa Clara, CA 95054-3115
Tel: +1/ 800 909-2282 (US/Canada)
+1/ 408 727-6600 (Worldwide)
Fax: +1/ 408 727-6622
Email: sales@lecroy.com
www.lecroy.com
LeCroy reserves the right to revise these specifications without notice or penalty. Advisor, BusEngine, CATC, CATC Trace, BPT, BTTracer/Trainer,
Merlin II, Merlin, Merlin Mobile, Merlin’s Wand, Universal Protocol Analyzer System, UPAS, Chief, Chief Plus, EL200, FCTracer, FCTrainer,
FCTracer/Trainer, FireInspector, IBTracer, IBTrainer, IBTracer/Trainer, PETracer, PETrainer, PETracer/Trainer, SATracer, SATrainer,
SATracer/Trainer, SASTracer, SASTrainer, SASTracer/Trainer, UPT2, USB4DOS, USBMobile, USBTracer/Trainer, Verisys are trademarks of LeCroy
Corporation. The BLUETOOTH trademarks are owned by Bluetooth SIG, INc., U.S.A. and licensed to LeCroy. BlueVision is a trademark of
Hyper Corporation. All other trademarks are the property of their respective companies.
©2004 by LeCroy Corporation. All Rights Reserved.
November 2004