TANKS & CYLINDERS - COMMQUEST INC

G
TANKS & CYLINDERS
ASME TANKS
Item # Size Dimensions
V-60 Vertical 60 gal 24” DIA X 42” TALL
60-A G/UG 60 gal 24” DIA X 37 1/2” OAL
V-120 Vertical 120 gal 30” DIA X 4’6” TALL
120-AG/UG 120 gal 24” DIA X 68” OAL
150-AG/UG 150 gal 24” DIA X 84” OAL
250-AG/UG 250 gal 30” DIA X 94” OAL
325-AG/UG 325 gal 30” DIA X 119” OAL
500-AG/UG 500 gal 37” DIA X 119” OAL
500-UG 500 gal 37” DIA X 119” OAL
AG/UG: Designed for either above or underground installation. All
valves are under the dome.
UG: Designed for underground installation. Tank has multivalve on
24” riser.
We are a consignment location for
American Welding & Tank Co. Pick up a tank
from us and be invoiced by American Welding.
R-CC COMPOSITE 16#
CYLINDER
These Ragasco Cylinders visibly show the
liquid level at all times. This units design
gives a softer friendlier look than
traditional cylinders. The handgrip has
no rough edges and is 50% lighter than
steel cylinders and holds the same gas
volume. The R-CC cylinders are noncorrosive
and test show when attacked
by fire the unit reacts with a controlled
burnout rather than an explosion.
- 62 -
PORTABLE D.O.T. CYLINDERS
5# VERTICAL
ASME Tanks and D.O.T. Cylinders
MANCHESTER STEEL VAPOR CYLINDERS
20# VERTICAL
100# VERTICAL 420# VERTICAL
40# VERTICAL
Size Description Item #
5# Vertical w/ OPD M10054
6# Vertical w/ OPD
10# Vertical w/ OPD M10228.4
11# Vertical w/ OPD M10393.1
20# Vertical w/ OPD M10504
20# Vertical “Sureflame” OPD, w/gauge M10504.107*
20# Vertical w/ OPD & gauge M10834TC.1
20# Vertical w/OPD Quick Disconnect M10502
20# Horizontal w/ OPD M10144TC.3
20# Horizontal w/ OPD w/ gauge M10487TC
30# Vertical w/ OPD M1160.8
30# Vertical w/ OPD w/ gauge M1166.2
30# Horizontal w/ OPD M1164TC.1
30# Horizontal w/ OPD w/ gauge M1175TC
40# Vertical w/ OPD M1220.13
40# Vertical w/ OPD w/ gauge M1222TC.2
50# Vertical w/ 10% POL & collar M14990TC
60# Vertical w/ 10% POL & collar M1426
100# Vertical w/ 10% POL & collar M1428
100# Vertical w/ multivalve & collar M1436
200# Vertical w/ multivalve & gauge M14205.1
420# Vertical w/ POL, outage, fill,
relief, & gauge
M1499.1
28gal Vertical ASME w/
Multivalve & Gauge
M681438L
*Sureflame valve has a gauge in the handwheel.
CONYERS, GA (800) 241-5652
APOPKA, FL (800) 432-1869
GOLDSBORO, NC (800) 426-9293

D.O.T. Cylinders, Tools, & Accessories
PORTABLE D.O.T. CYLINDERS (CONTINUED)
CYLINDER TOOLS/ACCESSORIES
CONYERS, GA (800) 241-5652
APOPKA, FL (800) 432-1869
GOLDSBORO, NC (800) 426-9293
ALUMINUM VAPOR
CYLINDERS
Size Description Item #
10# Vertical w/ OPD M9058TC
20# Vertical w/ OPD M9060TC.1
20# Vertical w/ OPD & gauge M9060TC.4
30# Vertical w/ OPD M9151TC
R20-3 R20-4
LIFT TRUCK/ FLOOR BUFFER
CYLINDERS
Size Description Item #
20# Vertical Aluminum Floor Buffer M9285
20# Vertical Steel Floor Buffer M5455A
33 1/2 # Steel L.T. w/ fill valve M5580A
33 1/2 # Aluminum L.T. w/ fill valve M9315A
43 1/2 # Steel L.T. w/ fill valve M5595A
43 1/2 # Aluminum L.T. w/ fill valve M9161
N201
CYLINDER FILLING VALVE
Fills cylinders by weight and stops the gas
supply when specified fill weight is
reached. It attaches to a beam type
scale and requires no electrical or
mechanical power.
BOT-L-RENCH
Tools for removing and installing cylinder
valves.
Item # Description
R20-1 POL plug
R20-2 Wrench
R20-3 Wrench handle
R20-4 Chain vise assembly
R20-5 Plumbers pot wrench
R20-7 Forklift Valve wrench
R20-8 OPD Valve wrench
R20-7 R20-2 R20-5 R20-5
R20-8
CYLINDERS AND ACCESSORIES
- 63 -
CYLINDER TOOLS/ACCESSORIES (CONTINUED)
CYL-VISE
CYLINDER CLINCHER
Economical vise designed to secure
cylinders up to 100# capacity for easy
valve removal. Use a socket wrench
to tighten and loosen the strap.
CP9361-1
AIR SCRIBE KIT
Air operated tool for marking DOT
cylinders after required inspection.
Writes quickly and easily on steel.
CP054177
Replacement Stylus for Air Scribe.
E-Z STAMP
Air gun uses standard 1/4” dies to
stamp numbers and letters on
cylinders. Works on 60 lbs. of air
pressure and is simple to operate.
Item # Description
E-Z-A Air gun w/ numbers and letter “E”
E-Z-B Air gun w/ numbers and letters
CYLINDER MARKING DIES
Item # Description
HL4980-14 1/4” Letter Set
HL4980-04 1/4” Number Set
HL4980-E 1/4” Letter “E” only
RCA
CYLINDER STAMPING
ANVIL
Holds 1/4” die in place and provides
backing behind collar to prevent
collar bending.
MG130#20292
MARSHALL GAS
PURGING KIT
Safe, reliable method for purging LPG
cylinders.
G

G
CYLINDER ACCESSORIES
CYLINDER ACCESSORIES (CONTINUED)
M312C
CYLINDER GUARD RING
w/ Cut-out
S100SCAP
CYLINDER CAP
TU476A
PIT GAUGE
Accurately measure pitted areas of
rusted cylinders in the requalification
process. Unit comes with a leather case.
M1803
DUAL CYLINDER RACK
Designed to secure two 30# cylinders.
FORKLIFT CYLINDER
BRACKETS
Item # Description
TB-2 For horizontal cylinders
TB-3 For vertical cylinders
PORTABLE BEAM SCALES FOR CYLINDER FILLING
HB1000BA
CHATILLON PLATFORM
SCALE
Heavy duty, cast iron beam scale designed
for rugged service.
Platform size: 18” x 27”
Capacity: 1000#
- 64 -
CYLINDER/TANK DOLLIES
Scales, Carts, & Accessories
SC-1
STRADDLE CART
Will move tanks up to 250 gallon capacity.
CYLINDER TRUCKS
Item # Cylinder Size
T7325-S 100#
T7-900-4P 420#
RTC420M
MANUAL TANK DOLLY
Will move full 420# cylinders.
RTC420NG
MUSCLE MAN TANK DOLLY
Two-wheel gear drive w/ forward and
reverse speeds. Includes strapping system.
CONYERS, GA (800) 241-5652
APOPKA, FL (800) 432-1869
GOLDSBORO, NC (800) 426-9293

Anchors, Cabinets
ASME TANK & 420# CYLINDER ANCHORING SYSTEM
CYLINDER STORAGE CABINETS
CONYERS, GA (800) 241-5652
APOPKA, FL (800) 432-1869
GOLDSBORO, NC (800) 426-9293
MINUTE-MAN EZ ONE STEP
ANCHORING SYSTEM
Securely anchors tanks and cylinders in
flood prone areas. Deluxe anchors
have compacting disks and stabilizing
heads.
Item # Description
MME-24430 36” economy anchor
MME-Z1594 36” deluxe anchor
MME-Z1596 48” deluxe anchor
MM2375 Stainless steel strapping (100’)
MM2365 Coated 2 strap sling
MM2382 Plastic sheathing
MM2010 Bolts/nuts
MME-Z2741 Adaptor
MM2730 Anchor drive machine
RR1564
LIFT TRUCK CYLINDER
RACK
Rack holds four 33# lift truck cylinders.
Bar locks for security. Multiple racks can
be bolted together.
33# MOTOR FUEL
CYLINDER STORAGE
CABINETS
M Series Features:
• 3 safety decals
• Tapered shelf front
• Heavy duty welded hinge
• Lockable latch
• Meets all safety requirements
• Assembled and ready to use
Item # Holds Dimensions
M4 4 cylinders 30” W x 40” H
M6 6 cylinders 30” W x 55” H
M8 8 cylinders 30” W x 70” H
M12 12 cylinders 43” W x 70” H
M16 16 cylinders 60” W x 70” H
M24 24 cylinders 85” W x 70” H
- 65 -
CYLINDER ACCESSORIES
CYLINDER STORAGE CABINETS (CONTINUED)
20# CYLINDER STORAGE
CABINETS
X Series Features:
• locations for up to 3 safety
placards
• Heavy duty welded hinge
• 24 and 36 cylinder cabinets have
double doors
• Can be fastened to floor
• Your choice of color with acrylic
paint
Item # Holds Dimensions
X8 8 cylinders 27” D x 30” W x 50” H
X12 12 cylinders 27” D x 43” W x 50” H
X16 16 cylinders 27” D x 60” W x 50” H
X18 18 cylinders 27” D x 43” W x 72” H
X24 24 cylinders 27” D x 60” W x 72” H
X24L (low profile) 24 cylinders 27” D x 85” W x 50” H
X36 36 cylinders 34” D x 60” W x 72” H
G

G
DISPENSING EQUIPMENT
DISPENSING EQUIPMENT
H50AC
Our propane dispensers are completely
assembled and pressure tested. Each
unit can be purchased free-standing or
in either our upright cabinet or our angle
cabinet which will also accommodate
a 1000# platform scale. Listed below are
our most common units. Any dispenser
can be modified to your specifications.
The GPM pump ratings are at zero
differential pressure. Actual delivery
GPM will be less.
H48C
Our standard cabinets are steel and painted white. These cabinets are
also available in diamond plate aluminum.
Item # Description
DISP101 Cylinder filling dispenser. 10 GPM, LGFIE Pump, 1HP
motor, 18’ of 1/2” hose, no meter
DISP101M Cylinder and low volume motor fuel/RV dispenser,
10 GPM, LGFIE pump, 1 HP motor, 18’ of 1/2” hose,
meter and breakaway coupling.
DISP151M Cylinder and high volume motor fuel/RV dispenser:
15 GPM LGF IPE pump, 1 1/2 HP motor, 18’ of 3/4”
hose, meter and breakaway coupling.
DISP151M2 Same as DISP151M except it has an extra 1/2” hose
ahead of the meter for non-metered cylinder filling
operations.
DISPRFM High volume motor fuel/RV dispenser, 18 GPM
LGRLF 1 1/4 pump, 1 1/2 HP motor, 18’ of 3/4” hose,
meter and breakaway coupling.
These dispensers are mounted in our standard painted steel cabinet.
CABINET OPTIONS
Add suffix NC Dispenser without a cabinet
Add suffix A Dispenser in a large painted steel angle cabinet,
accommodates 1000# scale
Add suffix DP Dispenser in Aluminum Diamond Plate standard
cabinet
Add suffix DPS Dispenser in large Aluminum diamond Plate
angel cabinet.
Delete suffix M No meter
H48C-DP
All dispensers are completely
assembled and pressure tested.
They are built to order so
modifications to fit your
specifications can be easily
made.
- 66 -
DISPENSER ACCESSORIES
Dispensers & Accessories
H16S
16” TANK STANDS
Stands have sleeves welded to base that align with sleeves on the
bottom of our dispensing cabinets. The sleeves accept 2” pipe
that allows the tank and cabinet to be attached as a skid-mount
unit.
DISPENSER CONNECTING KITS
Our kits include a 1 1/4” valve for the liquid opening in the bottom
of the tank, a flexible connector, a strainer, and all pipe fittings
required to connect our dispenser to your tank. You may need to
provide a length of schedule 80 pipe depending on where the
dispenser is located. See appendix for material lists & schematics
of these kits.
Item # Description
LF1-C Deluxe kit includes Fisher’s 1 1/4” internal
valve with cable for remote operation from
within cabinet. All piping components for
pump inlets of 1 1/4”.
LF1-D Economy kit includes Squibb-Taylor’s
AL1596 manually operated angle valve with
excess flow. All piping components for
pump inlets of 1”.
CLH15C
15’ cable to operate internal valve.
HB1000BA
CHATILLON PLATFORM
SCALE
Heavy duty, cast iron beam scale
designed for rugged service.
Platform size: 18” x 27”
Capacity: 1000#
CONYERS, GA (800) 241-5652
APOPKA, FL (800) 432-1869
GOLDSBORO, NC (800) 426-9293

Vertical Tanks, Pump Kits, Bulkheads
PUMPING SYSTEMS
The following kits are primarily designed to be used with a small
capacity pump like Blackmer’s LGF1C (10 GPM) or LGF1PC (15
GPM)
For a pumping system to perform properly, you must have high
quality equipment installed in accordance with the manufacturer’s
recommendations and the following good installation practices:
1. The tank should be installed with as much vertical distance from
the bottom tank outlet to the pump inlet as practical. The
minimum recommended distance from the bottom of the tank
to the ground is 16” for good pump performance.
2. Only bottom tank outlets should be used to supply gas to liquid
pumps, and the size of these outlets should be no less than the
inlet of the pump. There should be no restrictive fittings on the
inlet side of the pump.
3. The pump should be located as close to the tank outlet as
practical. A LP gas pump can push gas for reasonable
distances, but cannot suck gas. Liquid gas must be fed to the
pump by gravity.
4. All positive displacement pumps require a bypass line to return
gas back to the tank. The Blackmer LGF1E and LGF1PE pumps
have built in bypass valves. A line must be run between the
pump and the tank to protect the pump against excessive
differential pressure.
CONYERS, GA (800) 241-5652
APOPKA, FL (800) 432-1869
GOLDSBORO, NC (800) 426-9293
MANCHESTER TANK’S
VERTICAL DISPENSER TANK
• Very visible and great for advertising
• Space saver design requires only 10’
diameter area.
• Portable base allows for easy
relocation
NOTE: Vertical dispenser tanks do not
come painted from the factory.
They are however primed, ready
to paint.
Gallons
Item # W.C. LP Cap. Dia. Hgt. Wgt.
M29014 660 528 3’6” 9’11 1/2” 2025#
M22014 1150 920 4’0” 13’3” 2878#
M29011 1250 1000 4’0” 14’2” 3500#
M29016 1600 1280 4’0” 18’2” 4019#
M23354 2000 1600 4’6” 18’7 1/2” 4540#
M29005* 10’ “X” shape steel base 413#
M22774* Crash posts and protective railing 305#
*Not available on 2000 gallon tank
- 67 -
PUMPING SYSTEMS (CONTINUED)
PUMPING SYSTEMS
5. Proper electrical wiring connections and correct wire size are
important for good pump performance. Be sure the motor
terminals are connected correctly for the voltage and rotation
being used. Listed below are general recommendations for
the minimal wire size for more common wiring runs on 1 HP
and 1 1/2 HP single phase motors. Please comply with the
motor manufacturer’s requirements concerning this matter.
Length of Run Voltage Wire Size
Motor Size: 1 HP Single Phase
100’ 115 #8
100’ 230 #10
200’ 115 #6
200’ 230 #8
Motor Size: 1 1/2 HP Single Phase
100’ 115 #4
100’ 230 #10
200’ 115 #0
200’ 230 #8
LF1-A
ECONOMY PUMP KIT
This kit includes a manually operated liquid withdrawal valve
with a 1” outlet. All fittings to the pump are 1”.
LF1-B
DELUXE PUMP KIT
Deluxe kit includes Fisher’s 1 1/4” internal valve. All piping
components are 1 1/4”.
See appendix for material lists & schematics of these kits.
BULKHEADS
BULK PLANT BULKHEADS
ITEM# COUPLINGS
STH16X10 2” and 1 1/4”
STH16X16 Two 2”
STH16X16X10 Two 2”, One 1 1/4”
STH24X16 3” and 2”
STH24X16X10 3”, 2”, and 1 1/4”
STH24X16X16 3” and Two 2”
G