DCA-S - Dynapac

Compaction meter and DCA-S (GPS)
A Dynapac vibratory roller with compaction meter and DCA-S
(GPS) is a reliable system for the control of compaction, and thereby
guarantees first-rate quality in your next project.
The operator can continuously read the compaction results on
his instrument panel. As opposed to conventional measurement
methods, the compaction meter provides continuous measurement
results and not only random samples as before.
The Dynapac Compaction Analyzer registers all the measurement
values from the compaction meter, while at the same time
the operator can see the compaction results immediately on the
computer screen.
Dynapac has developed this unique combination so that the
compaction will be correct from the very start.
A genuinely profitable machine!
2
3
A Dynapac Compaction Analyzer means that:
· The compaction energy can be concentrated to the ground surfaces
that need additional compaction.
· No unnecessary compaction of already finished surfaces.
· The risk of inferior or exaggerated compaction is eliminated.
· Each stage of the compaction work is documented, and high-quality
documentation of the compacted area is obtained immediately.
In other words you now have a much greater opportunity to achieve:
· First-rate compaction results with maximum uniformity in terms of
the bearing strength of each layer.
· Simple quality assurance.
· More efficient compaction.
· The best possible economy for both contractors and purchasers.
5
4
6
1