DSD/DSDQ Shear Load Connectors - Geo-Hidrol
DSD/DSDQ Shear Load Connectors - Geo-Hidrol
DSD/DSDQ Shear Load Connectors - Geo-Hidrol
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4<br />
<strong>Shear</strong> <strong>Load</strong> <strong>Connectors</strong><br />
ANCON SOLUTION TO JOINTS<br />
In most cases conventional dowelled or<br />
corbelled joints can be replaced by joints<br />
incorporating Ancon shear connectors. These<br />
are more effective at transferring load and<br />
allowing movement to take place, easier to fix<br />
on site and a far more cost effective solution.<br />
They can be used for movement joints in floor<br />
slabs, suspended slabs, and for replacing<br />
double columns and beams at structural<br />
movement joints. Applications in civil<br />
engineering include joints in bridge parapets,<br />
bridge abutments and diaphragm wall<br />
construction.<br />
Comparison of Performance with<br />
Conventional Single Dowels<br />
Grade C30<br />
Concrete & Six 32mm<br />
Joint Width One Ancon Dia Dowel<br />
of 20mm <strong>DSD</strong>130 Bars<br />
Dowel<br />
Diameter mm<br />
2 @ 35 32<br />
Area of<br />
2 Dowel mm<br />
1924 4825<br />
Serviceability<br />
<strong>Load</strong> kN<br />
145 138<br />
1 Ancon <strong>DSD</strong> 130 Serviceability<br />
<strong>Load</strong> 145kN<br />
6 Dowel Bars 32mm Diameter<br />
Serviceability <strong>Load</strong> 138kN<br />
Conventional Joints<br />
Slip Joint<br />
Slab Corbel<br />
Structural Movement Joint<br />
Ancon Solutions<br />
Ancon <strong>DSD</strong><br />
Double Columns Ancon <strong>DSD</strong><br />
Floor to Wall Connection<br />
Corbel Support Ancon <strong>DSD</strong>
Change language