Short Tender Notice - Birsa Agricultural University

No.F1-54/2009 BAU(Pur)__17_____/Kanke dated 03.01.2012
# '( ) " * +, - +. #
Short Tender Notice
!" # $ % ! " # $ !" # &
/# % 0 # # 0 # # % %
1 # # 1 0 - 1 % 1 . 2 !3 1 ) - $
+ ) " * + , - + . # / # % 0 )"* 0 %
www.baujharkhand.org 4 0 # 0 )"* 0 % 0 % 1 0 #
$ $ . 2 !3 1 + 1 % . # /# * 1 # # ! 5 1
0 # 1
Tender Equipment
Memo No.F1-54/2009 BAU(Pur)________/Kanke dated
Sd/-
#
) " * 1
, - +. #
Copy to : Advertisement Manager Dainik Bhaskar, Ranchi/ Manager, Finance Expert Ltd. The firm is requested to
publish the Short Tender Notice is daily news paper in one issue in minimum size on or before 7.1.2012.
!3
)
#
" * 1
, - +. #

NAME OF THE IMPLEMENTS/EQUIPMENTS FOR TENDER
S.N Name of Equipment Specification
1 Environmental shaker Temperature Range : 50C to 600 C
Temp. Accuracy: +5o C
Temp. Control: Digital Display Electronic Temperature Controller
Platform Capacity: 100 ml x 40 flasks
Shaking Speed: Variable speed 50 to 250 RPM with Digital speed meter.
2 Laptop with laser
printer, accessories,
software and furniture
1. Laptop: Core 2 duo processor, 2.93 Giga HZ, 320 GB HDD, 2 GB RAM,
Bluetooth, LAN Card, DVD writer, Windows 2007 registered loaded.
2. High speed laser printer
3. Computer table with revolving chair.
3 GPS Global Positioning System “GARMIN” USA Make Model GPS 60 with
software and PC Cable
4 Distilled water unit Double distillation unit with quartz boiler and condenser vertical panel
mounted type having an output of 2.0 lt/hour
5 Naturally Ventilated
Green House
Size- 500m2, bay size- 8m x 4m, Width of green house at least 35%
desired length, Ridge height- 6.5-7m, Ridge Vent- 90-90cm opening
with 40 mesh nylon insect net, Gutter height- 4 - 4.5m from floor area,
structural design- should withstand wind speed of 150 km /hr and load
of 25 kg/m2, Entrance rooms & doors- one entrance room of size 3m x
3m x 3m(LxWxH) need to be provided. Two hinge doors of size 2m width
& 2.5m height souble leaf made in plastic /FRP sheets nounted in
suitable strong frame. Cladding material- UV stabilized 200 micron
transparent plastic films conforming Indian standard (IS-15827:2009),
multilayers, anti drip, anti fog. Anti sulphur, diffused, clear and having
minimum 85% level of light transmittance. Curtain and Insect screen-
Roll up UV stabilized 200 micron transparent plastic film as curtains need
to be provided up to 3.0 m height on all sides having automatic type
motor operated crank mechanism. However, provision for manual
opening and closing of curtains need also be provided, 40 mesh nylon
insect proof nets (UV stabilized) of equivalent size need to be fixed
inside the curtains. Shadenet- UV stabilized 50% shading net with
motor/manually operated mechanism for expanding and retracting.
Size of net should be equal to floor area of green house. Drip irrigation
with fogging and misting facility (Disk filter 10 m3/hr, PVC pipe 63 mm,
50 mm, lateral 16 mm with emitters at 0.4 m spacing, hanging type
micro sprinkler nozzle (Fourway takeoff assemble) for very fine water
particles (foggers & mister) to be fixed in PE pipe of 16 mm, water tank
of capacity 2000 litre with pump and accessories. Warrantee- the firm
to provide warrantee free maintenance for one year from the date of
installation, Training- free training for operation, maintenance for one
year from date of installation.
6 LCD projector 2500 ANSI Lumens, WZGA, Copntact Ratio 2000:1 with Projection screen
with tripod screen.
7 Flow meter for gas Measuring range (0.05 to 9 mps), accuracy ±2 Calibrated span,
and liquid
transducer for pipe range (6 to 3050 mm)
8 Data logger with Operating temp. (-40 to 60c), temp. Range (-50 to 200c), Resolution 5
sensors
v, System accuracy 0.4% of F.S. max.
9 Electronic Balance Max. capacity 20 kg, Laboratory Balance, Power Supply 220 V,
Accuracy 0.1g, Display type LED
10 Desktop with printer, 17 inch LED display, 500 GB Hard Disk, i-7 Processor, operating speed
scanner, UPS & 2.83 GHz, Wi-Fi and Bluetooth support, Antivirus software, Pen drive 4
software
GB, Printer with scanner .

11 Improved biomass
combustion device
(Domestic)
12 Fixed Dome type high
TSC cattle dung
Biogas plant upto 10
m3
It can operate continuously for 1.5 to 2 hrs, 50% less fuel consumption,
Increased thermal efficiency: 25-35%, Runs on pellets made up of
agricultural waste & dry woody biomass.
Deenbandhu model TSC cattle dung Biogas plant 3 m3 capacity,
dome shaped/
13 Hot air oven Capacity 50 Liters, Natural convection, Power 1000 w, Power Supply 220
V 50/60 Hz
14 Table Top Centrifuge RPM-12000
Capacity: 8 cubet
15 UV- Visible
Range: 190 to 1100nm
Spectrophotometer Bandwidth : 1.8 nm
16 Distillation Unit Steam distilling unit completely automatic for all the operative phases
with high features of reliability and safety is required
17 Spectrophtometer
(microprocessor
based)
Baseline correction: Automatic; Measuring Mode: Scan[Transmission &
absorbance, Photometric[Multi & Serial]; Scan speed; Slow, Medium &
Fast; Scan interval: 5 to 99 seconds; Sample Holder: Automatic 6-
Position cuvette holder for 10 mm path length cuvettes; Filters: Auto, inbuilt
filter wheel; Data storage: 1000 samples storage memory.
18 Flame Photometer Scale range 0 to 100% sensitivity for full scale deflection: sodium 5 mg/l,
potassium 2 mg/l calcium 50 mg/l, lithium 15 mg/l; Accuracy 5% of
reading detector photo cell; Display 3 digit LCD: Filters narrow band
optical filters direct mounted: Reproducibility ± digit; Gas bottled LPG;
Power supply 220 VAC ± 25%, 47 to 53 Hz.
19 N digestion &
distillation
Capacity 4 or more samples ; Flask capacity 800 ml; temperature range
ambient to 380OC; Thermostatically controlled; Power supply 220 VAC
± 25%, 47 to 53 Hz, single phase
20 Horizontal Shaker Standard hole pattern consists of 25 threaded holes in a 5 X 5 array.
Optional metric threads and spacing.; 30-lb (113 N) force, 30 inch/s
velocity, 6.25-in p-p stroke.
21 Time domain
Reflactometer
Model – TDR100; Pulse generator output: 250 mV into 50 ohms; output
impedance: 50 ohms ± 1%; Time response of combined pulse generator
and sampling circuit: 300 picoseconds; Pulse generator aberrations:
Within first 10 nanoseconds: ± 5% ; After 10 nanoseconds: ±0.5%; Pulse
length: 14 µseconds; Timing resolution: 12.2 picoseconds; Waveform
sampling: 20 to 2048 waveform values over chosen length ; Waveform
averaging : 1 to 128; Electrostatic discharge protection: Internal
clamping; Power supply: Unregulated 12 V(9.6 V to 16 V), 300 mA
maximum; Operating Temprature : -40O to +55OC
22 Leaf area meter Measuring range: leaf area, average area, length of leaf, width of leaf,
perimeter and ratio of length and width; Test unit: Millimeter, square
millimeter; Precisiom: +2%; Leangth: 1000mm; width: 160mm;
Thickness: 8 mm; Stored datum: 200 Groups; Battery: 6V.
23 Hot air oven External: Stainless Steel Casting: w x h x d: 850 x 600 x 700 mm ; Interior –
w x h x d : 40mm x 45mm x 30mm, 55 litres app. ; Forced air circulation
by quiet air turbine / Fan to ensure uniform temperature Fitted with load
indicator and safety thermostat take over indicator lamp. LCD/ LED
Indicator; Temperature variation +/- deg. C; Temperature Range –
ambient to 250 deg. C.
24 Precision balance Type electronic: Single pan; Capacity approximately 200 g; Resolution
0.1 mg; Stabilization time -5s; Pan size approx. 80 mm diameter; Power
supply 220 VAC ±25%, 47 to 53 Hz; Display LCD; Temperature range 10
to 40OC ; Humidity 10 to 85 %.

25 Grinding machine Heavy duty construction; Pulverize model grinder, housing with 75 mm
dia and 45 mm depth, adjustable blade from side; The housing is
equipped with a hopper at the top and collection chamber down with
interchangeable mesh; Driven by 1 HP motor; Suitable to work on 230 V
AC supply; Grinder size 75X45 mm.
26 Plant Canopy
Analyzer
Measuring and analyzing incident and transmitted photo synthetically
Active Radiation (PAR) in Crop, suitable for most light conditions.
27 Pyranometer Measurement of solar radiation received from a whole hemisphere.
Spectral range 305-2800nm, Sensitivity (nominal) 15 µV/ W.m-2,
Temperature range -40 - +80oC, range 0 to 2000 W.m-2 Temperature
dependence< 0.1%/oC
28 Gas analyzer (O2,
CO2)
Analysis of O2 0 to 100%, CO2 0 to 100%, N2 balance 0 to 100% . Oneclick
operation and fast test; test data is accurate and reliable.
29 Gloss meter Measurement of gloss/ brightness
Range: 0-100 Gloss Unit, Accuracy: 1%, mains operated along with any
of head 45/60/85 degree.
30 Laminar Air Flow Including, Filter, Grills Illumination & UV Germicidal
31 Generator / LPG
Operated
Silent, Single phase, 10 KVA with over head temporary shed
32 Spectro-Photometer UV visible Spectrophotometer
33 Shade net house /
Green net House with
temperature
regulation
34 Socs Automatic
Solvent Extraction
System
With temperature regulation and semi circular span (Roof)
Number of sample: Four
Heater source: Casted Aluminum Alloy Heater
Heater Power: 1400 Watts
Temperature Range 39O C to 200O
Temperature Accuracy +/- 1OC
Temperature Indication: Digital
Temperature controller: Microprocessor based Duel PID Controller with
Auto tuning facility
Temperature Setting: Feather touch membrane keys
Solvent recovery: 65 to 80%
Solvent Volume: 50 to 80 ml.
Measuring Range: 0.1 to 100% fat/oil
Repeatability +1% or better
Initial heat up time within 9 minutes up to 250OC
Extraction Vessel (C&R): (4 Nos.)
Collection Vessel 100ml Borosilicate Beaker (4Nos.)
Extraction Thimble: Niotro Cellulose thimble (A box of 25 thimbles)
Thimble Size: (25mm dia X 80 mm length)
Thimble Adaptor: 4 Nos.
M/S Power coated Thimble Stand (1No.)
Thimble Holder- 4 os.
Inbuilt Digital Timer
Independent loading of sample with individual mechanical control.
Unique upward spring load movement of individual block for perfect
lead proof alignment Inbuilt Air pump with Stainless steel manifold for
6

35 KEL PLUS Automatic
Nitrogen / Protean
estimation System
1. KES Series
Automatic
Micro Block
Digestion
System
2. KEL PIUS
Automatic
Distillation
System
perfect removal of solvent cloud.
Kel Plus Microprocessor Based: four place Macro block digestion system
Aluminum Digestion Block with temperature controller
Fuzzy logic temperature controller with sensor break protection
(Microprocessor based) temperature control range: 50-450OC
Temperature Indication: digital
Temperature Setting: Feather Touch membrane Switches
Temperature Controller : Micro Processor based PID Controller
Auto Tuning facility of Temperature Controller
Automatic safety features like over temperature protection
Temperature Accuracy: ± 1.0OC
Eaters: Casted Aluminu, Alloy Heaters
Power: 1000W
Digestion Tubes (Macro) 250 ml vol- 4 Nos.
Cooling Stand to keep the Insert. Rack after digestion
Exhaust Mainfold System
Digital Timer: range: 0-99.59 Hrs.
Digital display of set time and actual time, Heater cut off mode alarm
mode
E.M. Stand to keep the exhaust manifold system after digestion
Easy auto Fix Spring Clamps to fix the manifold KEL Flow assembly with
Giant Filter Pumps – 2 Nos and Acrylic View window
Anti corrosive Power coated finish
Electrical Requirement: 220v/50Hz AC mains
Basic distillation system (semi Automatic)
Steam Addition continuous (Manual press key)
Alkali addition continuous
Stainless steel steem generator
Peristaltic pump with spring load rotor and anti corrosive pump head
for alkali addition
Distillation capacity: 12-20 Sample/hrs.
Nitrogen recovery: 99.5-100%
Nitrogen detection level: 0 to 200N
Automatic replacement of steel by a balancer device by pressure
equilibrium technique.
Heater power: 1500W
Auto ready signal for steam processing
Distillations Water Tank Capacity: 5 Liter
Cold Water consumption: 120 L/Hrs.
Intel Water Pressure: 2 Bar
Distilled water automatically drawn from storage reservoir through
inbuilt centrifugal pump
Non corrosive Nylocast Tube rest
Electrical components rake mounted and isolated from alkali and
water carrying parts
Steam Capacity kept constant by thermostatic pre heating mechanism
Manual on/off switch
Safety Features:
Automatic heater cut off & protection device during low water level to
avoide dry heating Cooling fan for residual heat control Inbuilt
strategically placed safe vent valves
2

36 Baby Oil Expeller with
filtration unit
Automatic excess pressure release safety valves SMPS system for 12V
regulated power supply.
Electrical Requirement: 220v/50Hz AC mains
ADDITIONAL ACCESSARIES
KES 04LIR: : SS Insert Rack for KES (04 L)-1
KES DTL: Digestion Tubes – 250 ml. Vol. -4
Kes VT: Viton hose for Diacid and Triacid
Digation 3 Mtrs.
Suitable for oil seeds, capacity: 40 kg/h, fitted with 5HP motor and
starter, Filter press (12 X 12 X 8 plates with plunger pump and electric
motor) for filtration of extracted oil
37 Tomato Pulper Capacity : 400-500 kg/h, Fully SS with one sieve (1/32) operated by
electric motor.
38 Colloidal mill Fully SS with 3 HP motor, auto recycling system, jacketed hopper with
steam pipe connecting nozzle
39 Jacketed kettle Capacity: 25 gallons, Fully SS, provision of heating by electric heater
and thermo fluid (oil), Jacket should be filled with oil
40 Weighing balance Weighing capacity: up to 50Kg
41 BOD incubator with
humidity controller
Size 58 cm(W) X 51 cm (D) X 97 cm (H) – working space (285 liters
volume)
Temperature range 10OC to 60OC. accuracy +1oC
Humidity control 40% to 95% (Accuracy + 3%) with voltage stabilizer 4
KVA.
Operating Voltage: 230 V single phase 50Hz AC supply
Safety thermostate to prevent overheating
Double walled. Stainless steel body with three adjustable shelves
Digital display of temperature and humidity.
Temperature and humidity should be accurately controlled through
microprocessor-based controller.
Humidity sensor.
Audiovisual alarms warning of Temperature and RH variation.
Audiovisual alarms warning of low water levels and open circuit of
sensors.
Fully SS complete set with distillation tank, condenser tank and pipe
fitting, operated by LPG, Capacity: 5-10 kg.
42 Distillation plant for oil
extraction
43 Bottle filling machine Vacuum type, 2head, contact part SS, Capacity: 20-25 bottles per
minute.
44 Hand held digital Brix Range: 0-90%
refractometer Measurement Accuracy: Brix ± 0.1%
Temperature ± 0OC
Measurement Temperature: 10 to 100 OC
45 Paddy sheller, Lab model, power operated, Suitable for any variety of paddy,
polisher, grader Detachable husk collector
46 Vacuum tray dryer Suitable for drying food materials, dryer should be fitted with vacuum
pump, Digital Temp., Indicator, Dial type Vacuum gauge on Vacuum
chamber, 6 Trays, Vacuum break valve provided on Vacuum chamber,
Silicon foor grade gasket for door, All contact parts SS
47 Hammer mill Capacity: 15-25 kg/h, 3 HP electric motor, food material contact parts
made of food grade SS materials
48 Digital moisture meter Suitable of food materials, Digital LCD display
49 Grain mill (Bur mill) Capacity: 100 kg/h, 5HP electric motor, Horizontal type
50 Autoclave A double walled vertical autoclave
Inner chamber made of stainless steel LM 304 or better grade.
7

51 Humidity control
growth chamber
Outer body of stainless steel mirror finish
Lid of thick stainless steel designed to withstand pressure upto 30 PSI
with operating pressure upto 15-22 PSI.
Radical locking system made of stainless steel bars.
Ring made of cast irons
Fitted with pressure gauge, water level indicator, steam release valve,
safety valve and safety temperature control with indicator to control
temperature and pressure.
Capacity: 15-20 liters and electrical load / rating of 3-4.0 KW
Digital adjustable timer with auto cut off mechanism.
Automatic pressure control switch
Automatic low water cut off device for element
Mechanical or digital timer 0-60 min.
Vacuum breaker.
Foot / paddle lifting arrangement
Electrically operated on 220 I 230 V, 50Hz
Minimum warranty of 2-3 years
Capacity: 400-450lit.
Dimension: Inner - W 50-60cm
Heater : 3-4 KW
Refrigerator: 0.5-1.0 HP
Temp. Range: 5OC – 60OC
Temp. accuracy: ± 0.2OC at 20 OC
Humidity Range: 30% -95% RH
Humidity Accuracy : ± 1% at 70%
Controller: Programmable Digital PH
Programme Function: 8 step for light bank 120
Display: Digital LCD display
Dirigerant: CFC Free (134A) Rem
Illumination: Range 0 to 20.000 flux
Sensor: Photo sensor
Material – Internal : S. Steel
Ceiling – Tempered Safety pair
Door – Silicone Packed Magnet
Shelves – At least 04 of hard steel
Safety Device – Over temp. Protector
Warranty – 2 years from the date of purchase
Condition: Two year guarantee / warrantee after extraction vessel and
one packer of
52 Fibre scotching
machine
53 Light quantum sensors
with loggers
sensors with loggers
54 Plant canopy analyzer PAR sensor, 10 line, quanum sensors, LCD (16 v 2), Memory range > 4000
data sets
55 All Quartz double
distillation unit
LQD 6 , Cooling waterfeed 70 lit/hr., pyrothene free RH/PH-6.9-7
56 Horizontal Laminar Air
flow Chamber
Size 24”x24”x36” Shelves 6
57 Flame photometer Digital Flame photometer
58 SPAD Meter Seed storing cabinet
Weighting balance
Sprayers
59 Digital Camera 16.2 Mega pixel & more, Internal memory, micro SP card upto 16GB,
Auto Flash, Maximum Moring resolution with Computer connection
8

60 Microwave Oven Capacity 38 liter & more, Double convection fan with multi rack
61 Mini tractor with trolley
and cultivator
62 Motorized knapsack
sprayer
63 Dynamometer
64 Rotary mode setup
65 Laptop
66 Electronic Analytical
Balance
67 Moisture Testing
Machine
68 Rice Germinator
69 Grain Counter
Machine
70 Micro Scope
71 Leaf Area Meter
72 FLAME PHOTOMETER
25 HP
HP Pavilion dm4x Entertainment PC series
Genuine Windows 7 Home Premium 64-bit
2nd generation Intel(R) Core(TM) i3-2430M Processor (2.4 GHz, 3MB L3
Cache)
Turbo Boost to 3.0 GHz
4GB DDR3 System Memory (2 Dimm), DVD RW Driver
500 GB 5400 rpm Hard Drive with HP Protect Smart Hard Drive
Protection
Intel 802.11b/g/n WLAN with Wireless Display Support
Up to 6.75 hours of battery life (6 cell)
ISO certified co. high contrast, large backlight LCS display for easy
viewing AEP. Standard Rs. 232 interface, automatic external calibration.
Model –eyz 20, Capacity -200 gr. Readability- 1mg. pan size – 128 x 128
mm
Model MT PRO automatic Compensation test high moisture upto 40%, =
- 0.5% weight 1.8 Kg operation on 9 volt Alkaline batteries.
(Single Chamber) ISO 9001 certified co. Double wall inner made of
stainless steel outer made of thick best quality mild steel duely enamel
paints properly insulated with glass wool top prevent any heat loss full
view glass door for inspection of material in the chamber 555 X 910 mm
is provided with 8 nos. tray size 430 x 480 mm. Temperature 50 C to 500
C with an accuracy of +/-10 C with heat and cool arrangement with
the help of sealed CFC Refrigerated based compressor. Humidity range
ambient to 90% RH adjustable an accuracy of +/- 3% interior
illumination with the help of 3 nos. fluorescent tubes 60 cm long of 20W
each placed vertically suitable voltage stabilizer.
ISO certified co. total seed counted, Max.99999 Grain size Dia -1 mm to
15 mm Alphanumeric 2 CD line display counting speed : 35 to 300
gram/min weight – 8 Kg., power supply -220 volts, 5Hz count speed from
1 mm to 15 mm.
Digital Stereo set, complete with in built 6 V, 20 w halogen light, :
illumination with anti fungus aromatic objective INEA 4 X 10 X 40 x oil
spring paired eye pieces word field ichk 10 X in theromocite pacing
antifungal optics inter changeability of objective the abbe condenser
and the light relay system fitted with high performance aspheric lance
for bright & crisp image, window in armand figo nomic design
illumination system.
Portable light weight
Element channel 10 Mid –H
Na 1 - 100 PPM - 10 PPM - 10 PPM
K 2 - 100 PPM - 10 PPM - 01 PPM
Ga 1 - 15 PPM
Li 2 - 10 PPM
Nebulizer – Concentric suction type with stainless steel capacity flame

73 pH Meter and soil
74 Electronic Balance
75 Tractor
system, Burnner, Stainless Steel, fuel gas – LPG, Oxidant dry oil free air
regulator – stainless steel needle type, detector photo diode readout –
2 ½ digit 7 segmaent led, display of 12.7mm height with polenty
indication
pH range – 0 to 1400 pH Mv Range : 0 to ± 1999.9 ± Mv
(Inclusive Taxes) Resolution : 0.01 pH in range 01 Mv in Mv range,
Repeatability : 0.01pH 1 digit 1 Mv 1 digit, standard range (7.00 pH, 4.02
ph, 0.20pH) Temp. Compensation (pH 100) Display 2 X 4 Alpha Numeno
LCD keyboard 4 key operation power 230 volt 10% 50 Hz.
Capacity -10 Kg, Least Count – 500 mg., Large – 2 CD display (CH-
25mm) 2 Kg, 5 Kg, 10 Kg and 20 kg model available.
Model : Ultra SERIES 445 DI, ENGINE HP:42 HP with cultivator & Harrow
76 Photocopier Copying speed (cpm): 20/20, paper size (original / Image): A3 /A3,
RAM (MB): 16, Bye Pass: 50 sheet, zoom 50 to 200%
Stabilizer: 2 KVA Automatic Voltage Stabilizer for Photocopier
Trolley for Photocopier
77 PCR System Main thermo block accommodates 25 x 0.2 ml, 16 x 0.5 ml and One 5 x
5 micro titer plate
Adjustable heated lid for different tubes
Programmable temperature control speed: Approx. 3OC/s (heating)
Chip based memory card for easy transfer of data between different
cyclers
Ability to store methods on external card for safety and multiple user
capability.
78 Micro centrifuge Compact centrifuge for speed up to 14,000 rpm
Relative Centrifugal for RCF: Max. 16,873 x g
Dials and digital display for easy setting
Aerosol – tight rotor for 18 x 1.5, 2 ml tubes
Rotor should run with or without lid
Motorized lid latch
Brushless motor
Autoclavable rotor
Separate short Spin Key
79 Gel Document action
System
Camera Specification:
CCD Bid Depth: 12 bit
Megapixels: 2
CCD data acquisitions up to 16 bit
Gray scale Range: 65,536
Pixel Resolution: 1600 x 1200
Zoom lens: 12.5-75 mm/fl.2
Universal Hood with retractable sliding transilluminator tray for any
bench top transilluminator including 3UV, Uniform overhead white light.
Fluorescent viewer. Gel viewing window, Upgrade to Chemidoc
system.
System with four position filter wheel for Ethidium Bromide filter, SYBER
Green, SYBER Gold, SYNER Safe, SYPRO Orange.
System should have 2 UV Transilluminator (8 watt) Hi/Lo, 302/365nm,
20x20 cm filter & UV/White light converter screen ( 20 x 20 cm)
Analysis Software :
Acquisition and Analysis Software for ID analysis, image capturing, 3D
image profiler for visual inspection of band intensities for comparative
expression analysis, protein quantification, quantative PCR, cDNA
differential expression, Gel scoring, dotblot slot blot, live imaging,
calibration, background subtraction, image control, colorimetric,
9

80 Electrophoresis
accurate quantitation, generation of lane profile graphs, plus intensity
histograms, concentration curves, advance analysis tool, fluorescence
calibration, Suitable branded computer, Printer and 2 KVA UPS should
be provided with the system.
Horizontal minigel Electrophoresis System with power pack.
81 U. V. visible
Spectrophotometer
82 Computer / printer &
accessories (printer /
UPS/scanner/comput
er furniture, Stabilizer)
83 Tractor 25 Hp to 60 Hp
84 Trolley 2 Wheel 3 ton capacity
85 Rotovator 48 blade / 36 blade
86 Disc plough 2 furrow / 3 furrow
87 Offset disc harrow 14 disc / 20disc
88 Seed-cum-fertilizer drill 9 tin tiller / 11 tine / 13 tine
89 Power tiller 10-12 Hp
90 Flow through thresher 1 Roller type 7.5 Hp motor
91 Automatic
Nitrogen/Protein
Estimation System
with accessories for
digestion system
Baseline correction: Automatic, Measuring Mode: Scan [Transmission &
absorbance, photometric [Multi & Serial]; Scan, Medium & Fast; Scan;
interval: 5 to 99 seconds; Automatic 6-Position cuvette holder for 10 mm
path length cuvettes; Filers: Auto, in-built filter wheel; Data storage:
1000 samples storage memory
Desktop/Laptop- Make Dell Optiple x 980; Graphic accelerator card
PCI Express 512 MB; 2 GB DDR 2 RAM ; 1.3 MP Web cam; DVD 8 X RW;
UPS-1KVA with external battery; Laserjet printer HP CLP 1215, scanner
cum copier cum printer, HP Laserjet M1005 MFP; Computer Table &
Chair. Stabilizer
A.KES Series Automatic Macro Block Digestion System with accessories
Model KES 12L VA : KEL PLUS Superior Automatic Autosequencing
Twelve Place PC Compatible Macro Block Digestion System (Suitable
for plants, soils, water, food & feed, Fertilizers & pesticides samples)
Automatic 12 Place Microprocessor based digestion system. Aluminium
Block 250ml capacity with temperature controller.Temperature Control
Range: Room temperature to 450 ° C. Casted Aluminium Alloy Heaters,
Power : 3500 W.12 Digestion Tubes (Macro) 250 ml, Exhaust Manifold
System with teflon adoptors, easy autofix spring clamps, Viton hose for
diacid and triacid digestion. Inbuilt digital integrated timer, PC
controlled Auto Sequencing features,
Microprocessor Allows 25 intelligent memory programs, 12 desirable
sequence steps of time /temp. domain, 300 memory segments, Bright
Digital Two line LCD Display, Auto alarm for user's attention, Auto
power off mode on completion of digestion. Direct USB port for
PC/Laptop connectivity with software, Live Schematic process flow
feature, Graphical representaton of time and temperature gradient,
KEL Flow Assembly Suction filter pump for fume removal, Electrical
Requirement: 220V/50Hz Ac mains.
Automatic Distillation System
Model CLASSIC DX VA TS : KEL PLUS Fully Auto Run completely
Programmable Autoseqencing Microprocessor based PC Compatible
Touch Screen Distillation System with in-built software with 11
Programmable steps and 100 Predefinable User Storage Auto
Sequence Programmes
User friendly large Colour Touch Screen - TFT LCD Display (3.5"), 1024
factory designable screens inclusive of 256 images, 100 predefinable
autosequencing user storage programmes (Standard / Customizable

methods), Auto and Manual mode of Operation, Auto calculation of
results, Auto sequencing of 11 intelligent programmable steps(Boric
acid, Dilution, Dilution Delay, Kmno4 Addition, reaction delay time,
alkali addition, reaction delay time for neutralization, steam injection,
residue delay time, residue removal, Auto titrator connectivity with
delay time feature), High resolution of 320 x 240 pixels, Flow diagram
display of auto sequencing steps, SD card storage, Data logging, Data
table Export to Excel, Auto error indication on error diagnosis,
Upgradable Ethernet connectivity, Auto program termination and
deactivation of system when system is not in stand by mode and tube
not in place, Remote key operation feature for On / OFF, RS 232
interface for PC connectivity with USB converter port, High grade
Stainless steel non corrosive steam Generator, Fully Automatic water
level monitoring with centrifugal refilling pump & Perilstatic pump for
reagents addition. Auto reagent level sensor with indication for
Alkali,Kmno4 and Boric acid, Adjustable steam power-10 to 100%, Auto
online water saving, Auto aspiration of receiver residue, Autotitrator
connectivity, Software driven, Auto intelligent residue waste drains,
auto steam power adjustment with microbrilliant distillate control, Auto
start and auto stop mechanism, Software compatible with CLASSIC DX
VA TS for calculation and reporting of results with builtin formulae.
Interconnectivity cable to operate system through PC or Laptop,
Provision for direct calculation of results in LCD with user programmable
formulae for direct reading of protein / Nitrogen / Aviailable Nitrogen
etc. Ditect online printer connectivity to distillation system. Includes
Data Processing system of following configuration: dual core, 2 GB
RAM, 250 GB HDD, DVD Writer, Wifi, etc. Electrical Requirement -
220V/50Hz
C.Scrubber System :
Model KEL VAC VA: Fully Automatic Four Stage Acid Neutralizer
Scrubber with micro intelligent micro processor based with digital
display of time
Stage: 1 - Fume trap condensation, Stage: 2 - Neutralization in water,
Stage: 3 - Neutralization in Alkali,
Stage: 4 -Dissolution of air free of acid fumes in raw tank water,Digital
display of set time and actual time. (Range – 0-99.59 hrs.),
Microprocessor based brilliant auto waste disposal with auto drain of
tank water after every three consecutive operations. Incorporates LED
indication of Drain cycles, low level indication and high level indication,
Fill error displays in case inlet water gets choked with auto switch off of
system with alarm, Auto shut down of recirculation pump during water
filling in the tank, Non corrosive centrifugal suction pump with inbuilt
self priming feed pump for water recirculation. Non corrosive
submergible pump for drain, Non corrosive submergible pump for
condensor water circulation,
Alkali container capacity : 2 litres, Water container capacity : 2 litres,
Fibre Reinforced plastic Tank of capacity 10 litres, Electrical requirement
: 220v/50Hz
D.Titration System
Digital Burette Titration System
Compact Titration System. Accurate 2nd decimal digital display at

equivalence point. Volume ml - 50ml, subdivision ml - 0.02, Accuracy - +
0.2 %. PTFE Piston. Titration recirculating valve telescoping filing tube
with Inspection Window. Easy grip hand wheel action and smooth
precision gears for fast or drop wise titration make handling extremely
simple and reliable.Conformity certified with electronic volume
display.Special Amber Colour Cap for Sensitive Solution. Horizontal &
Vertical adjustment of Titration Tube with Integrated Discharge
valve.Auto switch off feature on longer periods of inactivity and built in
timer for Auto Power off Programming.
92 Laminar flow A Laminar Air Flow Horizontal type with following specification: Size: 4ft.
x 2ft. x 2 ft., 2) HEPA Filter efficiency 99.97% up to 0.3µ, 3) Protection grill
for HEPA filter, 4) Pre-filter efficiency 99% up to 5µ, 5) Stainless steel work
bench, 6) UV germicidal lamp: 1 nos., 7) Fluorescent illumination: 2 nos.,
8) Cork for gas, 9) Balanced blower with motor, 10) Megahylic
manometer
93 Horizontal autoclave Capacity – 162 litrs. Diameter – 400 mm c 110 mm, Generally confirming
to ISI specifications, with steam jacket for dry sterilization. Triple
chamber with inner chamber, steam jacket and out chamber made of
stainless steel grade 304. Kid is also made of thick stainless steel plate
with safety valve, pressure gauge, water level indicator, pressure
release valve, water inlet and drain valves. Pressure is adjustable from 5
psi to 20 psi ±½ psi. The body is mounted horizontally on thick tubular
iron stand. Complete with Automatic Pressure control Switch, cord and
plug. Suitable to work on 220V/240V.
94 Stereo binocular
microscope
95 Seed drill-tractor
drawn/Rotavator
96 B.O.D. Incubators
Trinocular observation head with binocular Central zoom control
movement, Wide field eye piece 10 X (paired) FOV 22 mm,
Objectives: Zoom 0.62 X to 5X twin with magnification ratio of 7:1,
transmitted light system with 12V-10W halogen tungsten lamp,
Magnification range from 6.2X to 50X with (1X objective) and 211 nm
(0.5X auxiliary lens). Microphotography System (8.1 mega pixel
resolution with 10X optical zoom, memory of 4 GB or higher) with image
capture card and adapter to record live activity of nematodes as well
as field photography) linked with latest configuration PC system having
image analysis software laser printer and other accessories.
Equipped with multi speed gear box, the Rotavator is a rotary tillage
tillage implement driven by PTO which cuts, pulverizes, mixes and levels
the soil in single pass. Working depth up to 250 mm, select a tilth gear
box – 04 rotor speed 122, 153, 172 or 216 rpm, Side transmission by Gear
drive (Standard) or Chain drive (optional), Fitted with Extra heavy duty
bladed rotor – special heat treated steel, Rotor with three speed
blade”C” (standard) configuration, Slip clutch protected (standard),
Culticvating depth adjustable by side skids (standard) or by side wheel
(optional).
Double walled, inner made of stainless steel 304 quality, outer made
of thick best quality mild steel the surface of which is primer coated for
anti rusting and is duly white stoved powder coated paint. Insulation
between inner and outer wall is done with 75 mm thick glasswool to
prevent any heat loss.
Inner chamber is provided with 2/3 nos. Perforated stainless steel
shelves with ribs to adjust the shelves at desirable height. Provided with
double door, inner made of thick transparent full view glass and outer
door is double walled metallic properly insulated with glass wool and
also provided with best quality handle, gasket, lock etc. Provided with
door operated illumination lamp. Whole unit is mounted on castor

97 Laminar Air Flow
Bench (Horizontal)
wheels.
Temperature range is from 5°C to 60°C and is controlled by
electronically controlled by digital temperature indicator cum
controller with PT-100 sensor. This controller is provided with time delay
relay to control the accuracy in maintaining the temperature.
Temperature is maintained with an accuracy of ± 0.5°C.
Cooling is done with ISI mark compressor of KIRLOSKAR make which
is connected to thick copper coils placed in the rear of the chamber
through condenser, fan motor, capacitor, relay etc. Whole cooling unit
is placed below the main chamber in a GI housing. CFC free,
environment friendly.
Heating is done with ISI mark strip type heaters placed near the
cooling coils. Air is circulated by 2-nos. ISI mark silicon binded motors,
which are connected to balanced blowers, which operates
alternatively and continuously with heating and cooling. Provided with
On/Off switch, indicators, digital controllers.
SIZE INSIDE CHAMBER (Height X Width X Depth)
900 mm X 700 mm X 650 mm 15 cu. ft.
The following operational arrangements were in the BOD Incubator
1. BOD incubator incorporated with timer 0-24 hrs. For regulating
cyclic illumination
2. Humidity chamber
3. Shaking machine fitted inside the BOD with variable speed by
regulator
4. Voltage stabilizer 2 KVA
It involves double filtration of air. Atmospheric air is drawn through
prefilters and is made to pass through the work table at desired velocity
of 1000 cfm +/- 20.
Laminar flow is fabricated out of 18 mm thick duro board with interior
covered with epoxy paint and all exterior are covered with thick white
mica sheet. Environmental air is drawn by a balanced double blower
through prefilters retaining more than 75% of particulates and biological
contaminants larger than 0.2 to 0.3 microns. All joints are tongs and
grooved type for extra strudiness. Table top is covered with non
antiglare platform of stainless steel sheet. The side panels are fixed and
are made of clear 0.25 inches thick glass or Perspex sheet.
HEPA filters are fabricated out of washable synthetic non woven
media. The material id moisture fungus bacteria and frost resistant and
is mounted in metallic frame. The filters are DOP as per BS: 2831 and are
90% efficient to 5 microns.
These are made out of micro glass fibre with corrugated aluminium foil
separators and mounted in anodised aluminium frame sealed with
epoxy sealant and is provided with rubber gasket for proper sealing.
HEPA filters are 99.97% efficient down to 0.2 to 0.3 microns and are
protected by expanded metal sheet or plastic sheet and these heap
filters are provided with test reports. Hepa filters are DOP tested from

point to point with IPD less than 18 mm WG and FPD less than 40 mm
WG at rated flow upto 90 fpm +/- 20 fpm. and confirming to class 100 of
revised US Federal Standard 209B. Blower assembly consist of suitable
American universal motor or equivalent working on 220 V 50 Hz with a
15 amp. power point. Dynamically and statistically balanced blowers
with air velocity 0.5 m/s make the unit least vibrant with minimum noise
level i.e. less than 65db. Clean air velocity 90 fpm. +/- 20 FPM at the
outlet of Hepa filters. Provided with 1 or 2 nos. Fluorescent tube lights
with all necessary fittings etc. These tube lights are suitable to provide
800-1000 lux recessed in canopy and replaceable from the top of the
canopy. Static pressure manometer accurately caliberated to assess
static pressure in HEPA filters. Opional front acrylic door, Gas line fitting
to connect the instrument with gas or air. UV light of 30w 254 nm.
Control panels is provided with mains indicator lamp fluorescent and
UV tube switch etc.
Working Area Size of HEPA No. Of HEPA With SS body, SS
Top with flower wheel 6X2X2 3'X2'X6" 2
98 Bee Hives Bottom Board : Single piece of wood 550mm long, 406 mm broad and 22
mm thick. Along each end of the longer side is nailed a wooden rod of
the dimension 550mmx 22mm broad x 22mm thick and another wooden
rod 363 mm x 22mm at the back. The front should be provided with
entrance rod of 363mm x 22mm having on entrance of 75mm long and
22mm deep in its middle.
Brood Chamber and Super Chamber
(a) Outside dimension - 550mm x 405mm x 230mm height Thickness –
22mm
(b) Inside dimension - 456mm x 363mm x 238mm height. A rabbet
16mm deep and 13mm wide should be cut along the entire
length of its width plank.
Frame : Top bar 475mm x 25mm x 22mm Grove in the middle of its
lower side.
Side bar : 226mm long and 9mm thick. Upper and lower part of should
be of 34mm and 25mm wide, respectively. Each should be cut out from
the middle portion at either and to accommodate the top and bottom
bars. Each side bar should contain 4 holes.
Bottom Bar : 440mm long x 19mm wide x 9mm thick outside
measurement of the frame 440mm x 228mm
Inner cover : 500mm x 406mm x 9mm
Top Cover : 525mm x 425mm x 50mm high with metallic cover
Wood to be : Well seasoned wood should be used
For Beehive : Mango wood
For Framed : Gambar wood
Quantity : 400 beehives with full set
Each brood : And super chamber should be pointed from outside.
99 Honey bees Colonyn Each colo0ny should be of 5 frames-fully covered with bees. Out of which
6

(Apis mellifera) one (1) frame should have honey and another frame should contain
pollen. Eacdh colony should have one prolific queen not there than three
(3) monts old. The frames should contain enough sealed and unsealed
brood.
100 Hot Air Oven Stainless steel, tripled wall in construction, inner chamber made of heavy
gauze SS sheet, middle wall and outer wall jacket made of steel sheet
finished with moisture proof and heat resistant silver ash hammer tone
spray paint. Space between the walls of chambers and door adequately
insulated with best quality fiber glass wool. Thermostat control, temp.
range 50-3000C, digital controller cum indicator, complete with
thermometer and connection cord etc.
101 BOD incubator Low temperature microprocessor, multi functional controller temperature
range 0-60o having LCD back light PV and SV display, timer 99 hrs 59
minutes. Material inner SS, outer material powder coated steel, door inner
tempered safety glass, door outer silk on packed magnetic door with
electric supply and branded stabilizer, Capacity 250 to 300 liter
102 Horizontal autoclave Capacity – 162 ltrs. Diameter – 400 mm c 110 mm, Generally confirming
to ISI specifications, with Steam jacket for dry sterilization. Triple chamber
with inner chamber, steam jacket and outer chamber made of stainless
steel sheet grade 304. Kid is also made of thick stainless steel plate with
safety valve, pressure gauge, water level indicator, pressure release
valve, water inlet and drain valves. Pressure is adjustable from 5 psi to 20
psi + ½ psi. The body is mounted horizontally on thick tubular iron stand.
Complete with Automatic Pressure Control Switch, cord and plug.
Suitable to work on 220V/240V
103 Stereo binocular
microscope
Trinocular observation head with binocular Central zoom control
movement, Wide field eye piece 10 X (paired) FOV 22 mm, Objectives :
Zoom 0.62X to 5 X twin with magnification ratio of 7:1, transmitted light
system with 12V–10W halogen tungsten lamp , Magnification range from
6.2 X to 50 X with (1 X objective)and 211 nm (0.5X auxillary lens).
Microphotography System (8.1 mega pixel resolution with 10 X optical
zoom, memory of 4GB or higher) with image capture card and adapter
to record live activity of nematodes as well as field photography) linked
with latest configuration PC System having image analysis software laser
printer and other accessories
104 Research Microscope Trinocular Microscope for bright field and phase contrast technique,
Built in transmitted LED illumination stand with integrated path for
photography; objectives having magnification 4x, 10x, 40x, 100x and
eyepiece of 10x/23 mm, System should be supplied with digital camera
for Microphotography application, ( 8.1 mega pixel resolution with 10 X
optical zoom, memory of 4GB or higher) with image capture card and
adapter) as well as field photography) linked with latest configuration
PC System, laser printer and other accessories.
105 Digital SLR Camera 12 mega pixels and above 3" above LCD display screen complete
withlenses, Battery charger with batteries and carrying case and 2
GBmemory card.
106 Laptop
Intel Core 2 Duo processor T8300, 2.4 GHZ with 3MBL2 Cache 800
MHzFSB, Chipset & Motherboard: Intel GM 965 chipset on OEM
motherboard, Memory: 2/4 GB RAM, HDD: 360 GB 5400 rpm
(min),Resolution: 1280x800 WXGA, with 128 MB Shared memory,
Modem:Integrated 56 KBPS Modem (FAX/DATA) and 10/100 Ethernet,
WirelessConnectivity: Integrated wireless Intel 802.11a/b/g, Integrated
Bluetooth, DVD Writer: Integrated DVD Writer 8X. Microsoft Windows
2

Vista business and preloaded with latest version of Anti virus. 15".4
TFTdisplay with carry case.
107 BOD incubator Micro-processor based, caster wheel mounted, double walled inner
stainless steel, temperature range 5-60o supper deluxe digital,
570x875x550 mm, 250 to 280 lts capacity. Door operated illumination
lamps, inner door made of glass with branded stabilizer.
108 Seed germinator Microprocessor based programmable (at least 50 or more programmes
of temperature can be stored) inner chamber size 910mm
x555mmx605mm (HWD), inner chamber made of SS 304, temperature
range 5°C to 50°C +/- 1°C. Humidity range 90% to 95% +/- 3%, Interior
illumination by 3 or more fluoresce tube lights switching controlled by
programmable micro controller based timer
109 Deep Freezer(-20 C) Minimum Temperature: -200c; Internal Volume: 170 Ltrs; Int. Dimensions
WxDxH( mm):500x 430x 850; Ext. Dimensions WxDxH (mm); 630x 580x 1380;
Stainless Steel 304 (AISI Grade, Non Corrosive, Non Magnetic)
110 H.P Rectangular Diameter 450mmx600 mmx900mm (WXHXD), generally confirming to ISI
Horizontal Sterilizer specifications, with steam jacket, triple walled, with inner chamber and
steam jacket made of thick stainless steel sheet and outer chamber is of
thick SS sheet. Lid is made of thick stainless steel plate with radial lock
arrangement, Fitted with safety valve, pressure gauge, water level
indicator, pressure release valve, water inlet and drain valves. Pressure is
adjustable from 5psi to 20psi + ½psi. The body is mounted horizontally on
thick tubular iron stand. Complete with automatic pressure control switch,
auto low water cut off, moisture trap and vacuum breaker as a safety
device, cord and plug cord, plug. Suitable to on 220V/240V
111 Thermal cycler machine For multiplication genome; Gradient PCR, silver thermo block, 96x0.2ml
capacity, temperature range: 40–990C, Block control and tube control in
gradient operation, peltier element heating technology, 12- row gradient
bloc gradient range 1-240C, Gradient temp 30-990C, Block homogeneity
± 0.30C, heating and cooling rate 60C/ sec. along with control panel,
one –8x12 microtiter plate, variable ramps, linking up programmes,
control panel with one VGA monitor, Microsoft Windows XP, 16 MB
memory capacity, control of 5 different thermal modules, Eppendroff /
Biometra, etc.
112 Gel electrophoresis Gel electrophoresis apparatus consisting vertical slab & horizontal slab
system
along-with power supply, UV trans-illuminator with following specifications:
Vertical Slab Gel Electrophoresis: Gel Casting Unit, Gel size: 13.8 cm wide
x 13cm long; Gel thickness : 1 mm; Sample well : 12; Plate size : 16 x 16
cm; Should include two units of glass plates, gasket and comb; Slab Gel
Chamber , Gel accommodation : 1 gel; Buffer volume : 300 + 350 ml;
Plate Size : 16 x 16 cm,
Horizontal Gel Electrophoresis: Gel Size: 12 x 16 cm; Gel thickness: up to 8
mm; Comb thickness: 1mm, double-tooth comb 26 & 13 wells. Should be
supplied with Electrophoresis chamber incl. safety lid with power leads,
12×16 cm gel tray with 2 dams, comb holder, double-tooth comb for
1mm, 26&13 wells
Power Supply:1-300 V@1V; 1-400mA@1 mA; Automatic Crossover
Maximum Output: 50VA; Timed output:1- 999 minutes@1min. alarm buzzer
or continuous output, Display: 3Digits, 1line for voltage, 1line for current
and time selectable. power outlet:2 pairs in parallel, Safety protection:
automatic output shutdown, against short/open circuit with alarm
UV Trans illuminator: Bench top, long life filters, wavelength available 254
nm, 312nm, 365 nm, view dimension 21 x 21 cm, light source 8 W of 6
tubes, high efficiency reflector, high/low intensity switch, fast lighting up,
7

UV resistant plastic cover, Dimensions: 340 x 295 x 100 mm
113 Gel documentation unit To take photographs of gels; Camera thermoelectrically cooled CCD
digital with micro lens technology, 1.3 Mega pixel. Maximum gel size
25x26 cm, six fitters, motorized turret, integrated personal computer with
Pentium 233 MHz processor, floppy disc drive, hard drive, keyboard and
mouse array, Ethernet 10/100 mbits, RS 232 C, parallel port, including a
gel positioning facility by laser beam and gel cutting facility, complete
with main body, ECL tray, UV tray, white light tray, 12” color flat panel,
Key board, printer, long lofe polymer film, software, power supply 100-
240V, 50-60 Hz, compact dark room, slideout transilluminator, software
driven lens, one software, software driven motorized control of zoom,
focus, choice of 3 UV illumination wavelengths
114 Refrigerated Centrifuge Floor Model, Brushless DC driven high-torque motor, automatic
temperature compensation for all compatible rotors, integrator
automatic rate control high capacity refrigeration system charged with
CFC free SUVA refrigerant, automatic self test by microcomputer,
Hermatically sealed unit consisting compressor, condenser, evaporator,
and interconnecting tubing. During operation it should maintain selected
temperature, Run-speed 50 to 50,000 rpm, accuracy ± 1%, RCF 51,000 g
Run temp –200C to 400C. Run time selection 0-99 hours, Refrigerator
capacity 1.5KW, along with variable rotors for tubes, plates and
microtubes, adapters, tubes (Polypropylene/glass) for rotors, spares,
Sorvall / Hitachi/Heraus/Beckman, etc.
115 Spectrophotometer UV- To quantify genome; Built in cuvette port, should read semimicrocuvette
vis Range
and cuvette and also microplate over the full 190-900 nm wavelength,
applications to include DNA/RNA analysis, quantification,
monochromator to select wavelength in one nm increment, detect 20 ng
of DNA displaying, with LCD display and / or PC and program, 260x280
ratio, supplied with glass or plastic curettes, Schimatzu / Hitachi /
Perkenelmer / Varion / Eppendroff / Elico, etc
116 Double distilled water The Unit Distillate should be completely PYROGEN, ION and METAL FREE
plant
and Meet highest standard required for spectroscopy, Analytical and BIO
Technical work, complete system made of Quartz Capacity 1 Lit
11 Library Management
7 Software
11 Tomato Pulper • Capacity - 50 kg/hr, fully SS with one sieve (
8
1 /32) operated by electric
motor (single phase)
11
9
12
0
12
1
Pre Cooling Chamber • Forced air cooler
• Room temp. required - 0 to 150C • RH - upto 95%, temperature and RH controller, automatic door
closing mechanism
• Suitable for fruits and vegetables, flowers
• Storage capacity - 500 kg
Fruits and Vegetables
Washing Machine
Semi-Automatic Shrink
Wrapping Machine
(for fruits and
vegetables
• Suitable for washing of mangoes, tomatoes, potatoes, carrots and
other root vegetables.
• Spray washing
• All contact parts must be stainless steel
• Capacity - upto 50 kg/hr suitable for lab purpose
• Fully insulated hot chamber with variable speed, drive for stepless
regulation of conveyor
• Digital MP based temperature controller for accurate maintain of
tunnel temperature
• Fitted on four wheels L sealing attachment
• Chamber size – 350mm x 250mm x 800mm
8

packaging)
122 Pillow Pouch
Packaging Machine
with Nitrogen Flushing
System
123 Grain Cleaning
Machine
124 Band Sealing
Machine (Pouch
sealing)
[Horizontal & Vertical]
• Lab model with nitrogen gas flushing arrangement for sealing of all
types of polymeric film and laminated film machine should of SS
• Suitable for groundnut, wheat, maize, pulse, coriander, cumin seeds
• Power - 5 HP
• Capacity - 50-100kg (15-17 bags/hr) grade slope can be adjusted
• Grader can be moved both the side
• Air control is possible without changing pulley because of special
Bumber
• Suitable for sealing individual pouches/bag automatic
• The machine has variable temperature controller and speed control
to suit different grade of plastic material
• Temperature ranges - 0-3000C • Single phase
125 Mini Dal Mill • Consist with emery taper roll with sieves and cover, blower, cyclone,
vibrator for grading
• 12" diameter stone chalky
• Telpani tanks and screw conveyor and complete unit is mounted on
fabricated ‘c’ channel complete with 2 HP electric motor
126 Solar Dryer • Solar dryer for drying of agriculture produce of 25 kgs of drying
capacity with complete cover glass racks
127 Annual maintenance
for Account,
Computer machine,
photocopier machine
128 Annual contract rate
for lab. Chemical
glassware etc.
129 Photocopier toner Model Sharp Toner AR 5316
Model Work Centre 1418 P (Drum Cartridge)
Konica Minolta TN 500 for Xerox Machine
130 Printer cartridge HP Laser Jet 1010
HP Laser Jet 1020
HP Color Laser Jet 1515 N
HP 38A for 4200 laser printer
HP CC530A for CP 2025 laser printer
HP CC531A for CP 2025 laser printer
HP CC532A for CP 2025 laser printer
HP CC533A for CP 2025 laser printer
(Preference will be given local firm only
Item no. 127, 129 and 130)
131 Wheat Thresher • Length – 2500 mm, Width – 1750 mm, Height – 1450 mm, Weight - 550 kg
• Threshing efficiency (%) - 0.5-1-5
• Cleaning efficiency (%) - 99.5-99.8
• Capacity (kg/h) - 350-1350
132 Power Sprayer • No. of spray lance - upto 6
• Discharge (lit./min.) – upto 25
• Field capacity (ha/hr.) - 0.2-0.3
• Weight (kg) - 66.0
• Pressure developed (kg/cm 2 ) - upto 40

• Power required (hp) - 1-3
133 Knap Sack Sprayer • Capacity -0.4(ha/day)
• Weight (lit/min.)- upto 25
• Tank capacity-10-18 (lit.)
• Pressure(kg/cm2 )-3-5
• No. of piston in pump cylinder-1
• Pump discharge(m/min)- 610-896
134 Groundnut Stripper • Weight (kg) - 115 kg
• Type of blower – Throwing type
• Power (H.P.) - 2 Electric motor
• Stripping efficiency (%) - 98
• Cleaning efficiency (%) - 98
• Output capacity (Kg/hr) -120
• Power consumption (KW) -1.2
135 Multicrop Seed Drill
cum Planter
136 Animal Drawn Jyoti
Multicrop Planter
137 Conoweeder Weight- (kg) - 5-6
No. of rotars - 02
Capacity (ha/day) - 0.18
138 Seed-cum-Fertilizer
Drill
139 Computer with
Accessories and
Invertors
• No. of row in planter attachment – 6 (maximum)
• Seed metering mechanism – inclined plant with cell
• Fertilizers metering- Adjustable with agitators
• Seed hopper capacity(kg)-10-12 for different crops
• Power transmission – Chain and sprockets and bevel gears.
Length – 4200 mm, Width – 1300 mm, Height – 900 mm, Weight - 115 kg
Draft (N) - 800-900
Working width (mm) - 1350
Working depth (mm) - 100
Operating speed (km/hr.) - 2.0-3.0
Field capacity (ha/h) - 0.12-0.15
Field efficiency (%) - 60-66
Capacity (kg/h) - 350-1350
Length – 1000 mm, Width – 1000 mm, Height – 780 mm, Weight – 50 kg
Draft (N) – 500
Working width – 225-700 mm
Operating speed – 2.0-2.5 km/h
Field capacity – 0.10-0.28 ha/h
Field efficiency (%) – 65-70
RAM - 4 GB
HDD - 500 GB
Mother board – 431(GHz.)
Monitor - 01
UPS - 800 VA
Inverter – 850 VA
140 Hand Ridger Length – 1690 mm, Width – 240 mm, Height – 900 mm, Weight - 3.0 kg,
Size of ridger (mm) - 240
Capacity (ha/h) - 0.033
141 CIAE Seed Drill Length – 1000 mm, Width – 1000 mm, Height – 780 mm, Weight - 50 kg,
Draft (N) - 500
Working width (mm) - 225-700
Operating speed (km/hr) - 0.10-0.28
Field efficiency (%) - 65-70
142 Handing type Grain
Cleaner
Width - 600 mm, Height - 140 mm, Weight -17.6 kg
Field efficiency(%) - 65-70
Top screen size(mm) - 5.0-8.5
Bottom screen size (mm) -18x20-32x20
Screen effectiveness (%) - 75.4-86.3
9

Cleaning efficiency(%) - 99.0-99.80
Capacity(Kg/h) - 150-225
Labour requirement man (h/q) - 0.50
Operating cost (Rs/q) - 5.30
143 Power Tiller Type – Horizontal 4 stroke single cylinder water cooled diesel engine
Combustion chamber – Direct Injection (DI)
Bore – 95 mm
Stroke – 95 mm
Displacement – 673.4 cc
Compression Ratio – 18:1
Max. Torque – 4.2 kg-m/1900 rpm
Max. HP as per IS 13539 1996 – 13.0 HP @ 2400 rpm
S.F.C. (Specific Fuel Cons) – 192 g/hp/hr
Governor system – Mechanical centrifugal type
Cooling system – Condenser type thermo siphon cooling system
Starting system – Hand cranking
Lighting system – 12 volts/35 watts
Std. Pulley (DIA) – 100 mm/optional 120 mm
Dry weight – 125 kg
144 Maize Sheller Weight (kg) - 0.220
Shelling (%) -100
Cleaning efficiency (%) - 100%
Capacity (kg/h) - 18.22
145 Plastic Drum Seeder Length – 2000 mm
Width – 1500 mm
Height – 640 mm
Number of rows sown – 6 & 8
Row to row spacing – 200 mm
Number of seed metering holes – 9
Diameter of the metering holes – 10 mm
Number of floats – 2
Weight – 10 kg
Capacity – 1.1 ha/day
146 Vaccinator Automatic vaccine syringe – We may provide vaccine syringe of high
quality and the lowest price for you
Automatic vaccine syringe –
Automatic vaccine syringe with tube or bottle
5.0 ml, 2.5 ml automatic vaccine syringe
Dosage is adjustable from 0.5 ml to 5.0 ml
Easy to use and clean
147 Burdizzo Castrator Size – 9"
Material used – Stainless steel
148 Duster Hopper capacity – 1.3 kg
Walking speed of operator – 2 to 3 km/hr
Fertilizer spreading of length – 20 ft. straight, 15 ft. right and 3 ft. left
Productivity – 4 to 6 acre/hr
Speed of handle – 40 to 50 rpm
149 Zero Tillage Machine Name – National Zero Till Maize/ Multi Crop Planter
Model – NMCP-ZT
No. of rows – Available in 5, 4, 3 and 2 rows
Row to row spacing – 24" standard (max.) and adjustable
Fertilizer metering – Agitator and sliding orifice type
Seed dropping – Vertical rotating disc with cells on its periphery
150 3 HP Pump Set HP – 3.0
Total weight – 43 kg

Max. head – 18 m
Max. discharge – 790 LPM
Application – Irrigation, dewatering
Colour – Green
151 Paddy Thresher Model – Double fan
Thresher – Multi crop
Drum size/inch – 60*31
RPM – 650
Output – 15-18 qtl.
152 Weighing Machine Capacity – 300 kg
Accuracy – 50g Class-III
Platter size – 750 x 750 mm (+/-10%)
153 Birsa Ridger Plough Capacity – 40-50 Dismil
154 Fertilizer Broadcaster Capacity – 15 kg
Manual
Broadcasting – Seed, fertilizer and pesticide (granular)
155 Rice Transplanter
(Four row)
Length - 1460 mm, Width - 1330 mm, Height - 530 mm, Weight - 20 kg
Row spacing – 200 mm
Working width – 1200 mm
Working depth – 20-30 mm
Operating speed – 0.25-0.70 km/h
Field efficiency (%) – 55-60
Plant hill – 2.5 mm
Hill to hill distance – 20 mm
Draft (N) – 120-180
Field capacity – 0.04-0.05 ha/h
Labour requirement man (ha/ha) – 4-50
156 Naveen Sickle
157 Bhaibhav Sickle
158 Gatoor Sprayer
159 Power Tiller 12 BHP
160 Veterinary Surgical
Tools
161 Budding & Grafting
Knife
162 Dutch Hoe
163 Disc Plough
164 MB Plough General purpose
165 Single Action Disc
Harrow
166 Cultivator
167 Rotary Tiller 5-12 BHP
168 Power Winnower
169 Nine Row Groundnut
Planter
170 Seed Treatment Drum
171 Siketier
172 Spectrophotometer Micro controlled double bean UV-VIS spectrophotometer with
Deuterium and Tungsten Lamp to work in 190 to 1100 nm, Band width
1.8 nm, Readability 0.1 nm, Deuterium lamp x Tungsten (w) halogen
lamp with all standard accessories.
173 Flamephotometer 2 line 24 character LCD read out. Sensitivity Na-0.5 ppm, K-0.5 ppm, Ca-
15 pm and Li-0.5 ppm with all standard accessories

174 pH meter Range-0-14 pH0 + 1999 mv, Resolution -0.001 pH/mc/0.10C, automatic
calibration, LC model with all standard accessories.
175 Water distillation plant Capacity-10 ltr. Complete with double walled coiled condenser,
metallic stand, electrical fitting with automatic low water level cut off
device with all accessories, all glass parts of borosil.
176 Kjeldahl digestion and
distillation
Kjeldahl digestion for 40 tubes with temperature control upto 350 0C.
kjeldahl distillation glass distillation assembles at a time 6 samples,
Electrically operated with all standard accessories.
177 Grinder 1.5 kilo wat plant sample grinding with variable mess size for grinding of
plant with essential accessories (brass, cup, etc.)
178 Conductivity bridge EC-Range 0-200 ms, Accuracy 1% Accuracy 1% of range, TDS Range 1-
100 ppm, Accuracy 1% of range, Temp. compensation-0-500C auto/manual, 2 line 20 character Dot Matrix backlight LCD read out
with standard accessories
179 Phycal balance Weighing capacity upto 50 kg
180 Shaker Horizontal, 1.5 HP motor, Top-2.5’x2’, Cap-50 volumetric flask, 125 ml at
a time
181 Hot air oven Size –SS 600x600x600, Range – 5-3000C, Microprocessor based PID
temperature indicator cum controller, work on 220/230 volts AC with all
standard accessories.
182 Refrigerator Big size, Double door, Automatic, Cap – 450 ltr. With standard
accessories.
183 Grinder For grinding plant material
184 Chemical balance Electronic analytical balance fully micro processor based with full tare
facilities. Readability – 0.01 mg
185 Laboratory setup Includes laboratory table/ desk, rack, almirah, angle iron rack, wash
basin, exhaust fan, gas burner, etc.
186 Atomic absorption
spectrophotometer
Double Beam
Range – 185-900 nm, Band width – Auto select in 8 steps from 1.0 to 2.5
nm, Light source – Hallow cathode lamp, Flow control – Integral gas
control system with panel flow meter, Read out – 4 line 20 characters
dot matrix backlight LCD module.
Single Beam
Range – 185-900 nm, Band with – 0.15-3.0 nm variable in steps of 0.15
nm, Flow control – Integral gas control system with panel purge meters,
Control – Microprocessor control system, Readout – 2 line 24 characters
dot matrix LCD panel with backlight.
187 Water distillation unit Horizontal compact type, boiler is fixed horizontally and condenser
vertically. Fitted with quartz boiler tube operated on 220 VAC, single
phase. Load approx 2 KW optional accessories – water checking cut
off device with sensors.
188 BOD incubator Capacity – 6 cuft, Size – 830 x 505 x 415 mm, Range – 5 to 500C. Double
walled inner chamber of stainless steel, outer and lid of mild steel.
Temperature is controlled by digital temperature indicator cum
controller. Refrigeration and heating unit super deluxe automatic.
189 Refrigerator Big size, double door, automatic, capacity – 450 ltr. with standard
accessories.
190 Hot air oven Ambient to 2500C, Capacity – 45 ltr., Microprocessor based PID
temperature indicator cum controller, work on 220/230 volts AC with all
standard accessories.
191 Precision electric
balance
Fully microprocessor based with full tare facilities. Dual range, semi
micro balance. Weighing range – 0-60/210 gm, Readability – 0.01/0.1
mg, Tare facility – 0-60/210 gm.
192 Digital PH meter PH range – 0.14, Resolution – 0.01, Accuracy – ± 0.01, Temp.
compensation – 0-100 automatic.

193 Binocular microscope High transmission head 55-77m IPD, reversible nosepieces for accurate
alignment and easy to change objectives – 5x10x45x100, Eyepieces –
5x10xWF (paired).
194 Spectrophotometer Micro controlled double bean UV-VIS spectrophotometer with
Deuterium and Tungsten Lamp to work in 190 to 1100 nm, Band width
1.8 nm, Readability 0.1 nm, Deuterium lamp x Tungsten (w) halogen
lamp with all standard accessories.
195 Autoclave (Vertical) Double walled sturdy constructions. Size – 550 mm x 750 mm, 110 ltr.,
Capacity – 6 kw load
196 Horizontal laminar
flow
197 Hot water bath Size – 16" x 12" x 4"
198 Working laboratory
table
Working area – 6'x2'x2', Hepa filter – 3'x2'x6' (2 nos.), Balanced blower
through perfilters, table top is covered with SS UV tube, fluorescent tube
light, gas cock and monometer.
Made of M.S. with duco painted, arrangement of drawers and shelves
in 2 sides. Top is covered with marble stone for lab work. 1 basin with
top arrangement, 1 gas line nozzle is provided. Size – 8'x3'.
199 Flamephotometer 2 line 24 character LCD read out. Sensitivity Na-0.5 ppm, K-0.5 ppm, Ca-
15 ppm and Li-0.5 ppm with all standard accessories.
200 Water distillation unit Horizontal compact type, boiler is fixed horizontally and condenser
vertically. Fitted with quartz boiler tube operated on 220 VAC, single
phase. Load approx 2 KW optional accessories – water checking cut
off device with sensors.
201 Centrifuge Revolutionary research centrifuge, complete set with standard
accessories.
202 Fume hood For digestion of plant samples with good exhaust.
4 ft x 6 ft x 2 ft
203 Cycloteck mill For grinding plant samples with standard accessories.
204 Laminar flow Horizontal working area, size-6’x2’x2’ HEPA
Filter 2’x2’x6’x2 nos
Balanced blower through prefilters table top is covered with SSUV Tube,
flworescent tube light, gas cock and monometer
205 Auto clave 14” dia x 22” hts digital temp controller
Automatic pressure control vertical type
206 BOD Incubator with
Humidity meter
Double walled insie stainless steel, outside made of mild steel with
insulation of 75mm
Size – HxWxD – 830 x 505x415 mm Temp is controlled by disital temp.
indicator cum controller from 5-5 0 c, Accuracy = 0.5 0 c. Air circulating
system is provided by 2nos. F.H. Motor with fan. Temperature setting
knob with electronic digital indicater cum controller, Range 5-5 0c with
PT-100 sensor
207 Grinder/ Mixer For laboratory purpose, Bio-fertilizer agent production
208 Digital weighing Top loading 400gm sensitivity 0.01 g
machine
209 Weighing machine 10 kg capacity readability – 1 gm
210 Sealing machine Sealing length 12”, width 3mm heating load 400 watt
211 Steel rack Made of MS with duco painted adjustable shelves with nut bolts
arrangement. Thickness 16-18 SWG size-6’x4’x1 ½’
212 Bee box with honey 1. Brood chamber, super chamber, 10+10 = 20 farmers
bees and other 2. Italian bee box and bee colony
accessories
3. 5 Farmers should be covered uniformly with bees on both
sides of the frame
4. Sufficient sealed and unsealed brood, honey and pollen stores
5. Young, prolific, queen
6. Honey extractor with different capacities along with other necessary

tools
213 Laminar flow Horizontal working area, size-6’x2’x2’ HEPA
Filter 2’x2’x6’x2 nos
Balanced blower through prefilters table top is covered with SSUV Tub
e, flworescent tube light, gas cock and monometer
214 BOD Incubator Double walled inside stainless steel, outside made of mild steel with
insulation of 75 mm.
Size – HxWxD = 830x505x415 mm 6 cuft temp. is contrdled by digital
temp Indicator cum controller from 5-500c, Acceeracy = 0.50c. Air
circulating system is provided by 2 nos FH motor with fan. Temperature
setting knob with electronic digital indicator cum controller, range 5-
500c with PT-100 sensor.
215 Auto clave 14” dia x 22” hts digital temp. controller. Automatic pressure control
vertical type
216 Digital balance Top loading 400g sensitivity 0.01g.
217 Hot air oven Size – SS 600x600x600 PID/ digital temperature indicator cum controller
2202230 volts A.C. double walled, adjustable shelves
218 Refrigerator Big Size, double door, capacity-450 L with stabilizers
219 Pulper Capacity 50 kg./hr. with 1 HP motor
220 Screw type Juice Manually operated suitable for cottage scale
extractor
221 Heat sealing machine Sealing length 12”, width 3mm, heating load 400 watt.
222 Crown corking Heavy duty hand operated with magnetic cork holder, adjustable to
machine
accommodated all size of bottles.
223 Heavy duty mixer 15 kg. of papad in 30 minutes
224 Weighing machine 10 kg. capacity readability 1 gm.
225 Solar drier Different size and make
226 Fruit mill/ crusher 1 HP single phase suitable for cottage industries
227 Digital hand
90
refrectometer
0 brix.
228 Refrigerator Big Size, double door, capacity-450 L with stabilizers
229 Agro Shade Net
House [Area 1800
sqft:7.9 ft (H)]
• Flat roof shape mild steel tube fabricated side corridor type structure
along with duly application of high quality anti-corrosive paint and
one coat of primer.
• 1 no. of door with proper locking system
• Post – 40 mm
• Purlin – 32 mm
• Bracing – 32 mm
• Corridor Bend – 32 mm
• Door – 25 mm
• Other fitting accessories including G.I. clamps, nut & bolt and
brackets, etc.
• Cladding material of ultra violet stabilized 50% green colour agro
shade net on structure.
• The shed net will be directly buried in the ground on the lower side
up to minimum depth of 30 cm to check insect-pest migration from
outside.
• Civil foundation of post for agro shade net house – CC foundation
(1:3:6), point type foundation of 2' (D) x 1' (L) x 1' (W), Floor – Natural
type.
• Overhead micro sprinkler system sufficient to irrigate protected area
with 1 HP mono block pump and online water filter and other
accessories.
230 Climate Controlled • Size – 10m (L) x 5m (B) x 3m (Centre ht.) : 2.1m (Side ht. from G.L.)
6

Greenhouse
(Polycarbonate type)
• The structure and design should be as such to adjust, the high
rainfall, so as to maintain the desired relative humidity levels as set at
different hardening stages for maximum survival. The main concept
to create the best possible conditions for 100% survival, better growth
and the morph genesis in plantlets and faster root and shoot growth.
• Humidity – Relative humidity (RH) up to 80±4% fogging through 100micron
size or latest available fine foggers so as to maintain desired
humidity with out drenching the plants.
• Cooling system – Cellulose cooling pad 100 mm thick and inserted in
G.I. sheet frame and also provided, PVC tank syntax 500 lit. capacity,
The dripping pipes to be provided over cooling pad and connected
with mono block pump 0.5 HP. The run off water collecting channel
and pipe to be provided to circulate the water. Provision of two no.
of 24" exhaust fan.
• Structure frame – Galvanized iron 38 mm x 38 mm±2 mm, for
supporting high quality 6 mm multi wall polycarbonate and the sheet
is secured with locking strip out side with air proof to maintain proper
humidity and temperature.
• Entry room – 1 no. of pre entry room for the greenhouse with auto
door closer and normal lighting provision.
• Foundation wall – 2 feet above ground level, 1 feet below and 10
inch wide, well furnished floor with 5 cm thick rodi : Sand : Cement
(4:3:1) mix.
231 Tomato Pulper • Capacity - 50 kg/hr, fully SS with one sieve ( 1/32) operated by electric
motor (single phase)
232 Pre Cooling Chamber • Forced air cooler
• Room temp. required - 0 to 150C • RH - upto 95%, temperature and RH controller, automatic door
closing mechanism
• Suitable for fruits and vegetables, flowers
• Storage capacity - 500 kg
233 Fruits and Vegetables
Washing Machine
234 Semi-Automatic Shrink
Wrapping Machine
(for fruits and
vegetables
packaging)
235 Pillow Pouch
Packaging Machine
with Nitrogen Flushing
System
236 Grain Cleaning
Machine
• Suitable for washing of mangoes, tomatoes, potatoes, carrots and
other root vegetables.
• Spray washing
• All contact parts must be stainless steel
• Capacity - upto 50 kg/hr suitable for lab purpose
• Fully insulated hot chamber with variable speed, drive for stepless
regulation of conveyor
• Digital MP based temperature controller for accurate maintain of
tunnel temperature
• Fitted on four wheels L sealing attachment
• Chamber size – 350mm x 250mm x 800mm
• Lab model with nitrogen gas flushing arrangement for sealing of all
types of polymeric film and laminated film machine should of SS
• Suitable for groundnut, wheat, maize, pulse, coriander, cumin seeds
• Power - 5 HP
• Capacity - 50-100kg (15-17 bags/hr) grade slope can be adjusted
• Grader can be moved both the side
• Air control is possible without changing pulley because of special
Bumber
237 Band Sealing • Suitable for sealing individual pouches/bag automatic
2

Machine (Pouch
sealing)
[Horizontal & Vertical]
• The machine has variable temperature controller and speed control
to suit different grade of plastic material
• Temperature ranges - 0-300 0 C
• Single phase
238 Mini Dal Mill • Consist with emery taper roll with sieves and cover, blower, cyclone,
vibrator for grading
• 12" diameter stone chalky
• Telpani tanks and screw conveyor and complete unit is mounted on
fabricated ‘c’ channel complete with 2 HP electric motor
239 Solar Dryer • Solar dryer for drying of agriculture produce of 25 kgs of drying
capacity with complete cover glass racks
240 Mobile LCV/VAN Van/LCV should be of approx. 20-21 ft in length, minimum power 74 HP,
torque min 225mm @1250-1800 rpm, fuel tank approx. 60 ltr.,
customaries with required fittings like display unit, microscope with
camera fittings, soil testing lab, water testing lab, leaf tissue kit, animal
diagnostic kit Refrigerator, Generator as mentioned in tender etc.
High Gain Screen with
Tripod Stand
Ceiling/ Wall
Speakers
Dual Channel
Amplifier with Mixing
Console
A. Dual Channel
Amplifier
B. Multi Channel
Mixing Console
Screen size 6 ft x 4 ft
Glass beaded projection surface
Black borders, soft in structure, straight and unwrinkled
Wide angle of vision, excellent color restoration and text and picture
display
Designed for easily operation control and installation
Power Amplifier - Dual Channel
Performance Sensitivity - 0.725 (Volts RMS)
frequency Response - 22 Hz to 20 KHz + 0.75 Ob
Input : 12 mic/ line input + 2 stereo line
Stereo input : 2 band EQ
Mono input : 3 bank EQ with a swept mid
Output : Min 10-Segment LED, Headphone
Frequency Range 80 Hz - 20
Power Capacity 80 W
Nominal Dispersion 130 degree
Nominal Sensitivity 86 Db
Nominal Impedance 16 ohms
Components Low Freq. 4 in High Freq ¼ in (19 mm)
Channel Min 12
Patch Panels VGA Minimum 1
Audio video 1
S. Video 1
Other ports Necessary Ports
Cordless Handheld
Microphone
Cordless Lapel
Microphone
Display Panel with
Peripherals
Freq. range 710 to 865 MHz
Modulation FM
Audio bandwidth 40 Hz to 20 kHz
Freq. range 710 to 865 MHz
Modulation FM
Audio bandwidth 40 Hz to 20 kHz
Screen size 32”
Resolution XGA
Pixels 1920x1080
Contrast Ratio 10000:1
Swivel/Tilt Should be present
Both side speaker Should be present
Viewing Angle More than 170 degree
7

Portable X-Ray
Machine
Wall Mount Bracket & Table Stand Either one present with
installation
Feature
• Digital Display for mAs, kVp, Technic, X-Ray ON & Overload
Protection
• Independent kVp, mA, mAs Techniques for better radiographic
results
• Microprocessor based system for accurate time selection for
exposure
• Automatic overload protection with visual & audible indication for
longer life of the Tube
• Voltage display indicate whether line voltage compensation is to
be increased or decreased. Exposure to be taken at 220v
• Line voltage compensation from 150c to 270 v
• Automatic cuoff for high input voltage
• Each kVp Step of 5 kVp. Dual step mAs selection
• Standby Circuitry in case of electronic component failure, the unit
can still be operated in manual mode.
Composition
• Tube head
• 30 mA Generator
• Tube stand
• And switch, operation manual
Technical specification
• Radiographic kVp 45-85 kVp (Each Step of 5 kVp)
• Radiographic Rating 15 mA, 20 mA and 30 mA
• Generator Type 2 Pulse, Full wave rectified
• MAs 0-220 mAs (Each step of 1 mAs)
• Tube type Stationary Anode Tube
• Radiographic Timer Automatic selection by Microprocessor
• Soft touch key board illuminated digital display for mAs, mA,
Rad/ Fio Bucky ON/OFF, ON/OFF, Ready
& Exposure
• Stand by circuitry In case of any electronic component
failure, the system can still be operated
in manual mode
• Digital display for kVp, mAs, mA, X-Ray On, Overload
Silent Generator For running all the listed equipments
Soil Testing Lab Kit should be present for determining NPK & Alkaline ,Acidic in soil
Water Testing Lab Kit should be present for determining pH in water
Refrigerator 170 ltr. 180 ltr. Refrigerator, defrost system with all required acc.
Kingston Lock, Data
Projection System with
Laptop
Portable leaf tissue
analysis Kit
Brightness 2500ANSI Lumens
Resolution Native XGA
Pixels 1024x768
Contrast Ratio 2000:1 & USB Display function
I/P & O/P Should have two I/P & one output & in-built
speaker
Remote control should have wireless mouse in remote control
and with in-built Kingston locking facility
Laptop Pentium i3, 2.53Ghz with all latest accessories
with small inkjet portable printer
Portable system for detection the late blight and minor
Detection of leaf and should collect the sample for further detection in
lab
8

Portable animal
disease analysis kit
Sample preservation
kit
Microscope Fitted with
digital camera
Caballing, Installation
& Fitting
Revolving chair &
Fixed Chair
Wi-Fi System
compatible with all
presentation
equipments
Scroller stand 5”x3”
with mounted veenyl
posters
With carry bags
241 Ahuja Medium Power
Amplifier – 120 watt
242 AHUJA 2 way
compact PA Wall
243 AHUJA REFIEX Horn –
WFA – 21 Bell Dia
244 AHUJA Driver Ulnit –
AU40XT
245 AHUJA PA
Microphone – AUD
101 XLR
246 LCD Projector SAN
YO/SONY
247 Xerox Machine
248 Genet
Portable system required for diagnosis in animals
Portable system required for collecting samples & should bring to lab for
further research
Binocular microscope should be fitted with Digital Camera &
Compatible for showing different slides
all above Mentioned Equipments in Moving LVC/ VAN
Front Chair - High Back Synchrotilt with five position locking
with adjustable lumbar support with five prone
wheel with caster
Visitor Chair - Medium Back chair with adjustable lumbar
support with fixed base
> Power outpur-160 watt max RMS rated 120 watt.
> Power consumption – 250 AC & 12 V DC (12V car battery)
> 5 Mic & 2 Aux. inputs
> 50 -15000Hz + 3 dB
> Speaker outputs – 4 , 8 , 15 , 70 & 100V
> Weight – 11.3 Kg (Portable)
> Output Regulations . < 2 dB, no load to full load at 1 kHz
> Signal to noise ratio-60 db.
> 60 watt RMS output
> Power TAPs – 60 W, 50/30/15 watts
> Impedance / Voltage – 8 , 100 V
> High fidelity 2-way speaker system
> U Type bracket for convenient wall mounting of the speaker
> Cutt off Frequency – 160 Hz
> Weight – 3.00 Kg
> 40 W/100V
> 40 watt RMS/60 Watt Max
> Frequency Response – 160-7000Hz
> Weight -2.24 kg
> Freq. response – 50 -15000Hz
> Sensitivity – 2.2 mV/Pa.
> Impedance - 500
1280x8000 WXGA or 1024x768XGA
ANSI Lumen 2500
Printer Size – A4
Speed – 12-15 cpm
Zoom – 25% to 200
ANSI Umen – 3000
with Voltage stabilizer
5.0 KVA (Engine & alternator mounted and fitted on base with wheels
Air Cooled type) normal

5.0 KVA (Engine & alternator mounted and fitted on base with wheels
Air Cooled type) Silent
249 Fax Machine Plain Paper FAX
250 Computer
Desktop, Intel core 2Duo, 2.93 Ghz, processor 3MB Cache 1066 MHz ,
FSB 4GB DDR3 SDRAM, 500 G.B. HDD, DVD Writer, integrated LAN,
18.5”/19.0” LCD/TFT monitor, Integrated graphics media accelerator,
wireless LAN internal, preloaded Window 7 with certificate of authencity
and three years hardware warranty.
251 UPS 0.5 kva with backup ½ hour battery
kva with backup 1 hour battery
252 Laser Printer Laser jet 1007, HP 1020 or equivalent
253 Furniture requirements
for training hostel
254 Furniture requirements
for administrative
building
Iron cot with luggage rack (size 3’x6 ¼’)
Mattres (3”x6 ¼)
Student desk 3 seater
Student desk 2 seater
Nilkamal chair CHR 10
Nilkamal chair CHR 10 with arm
3 drawer office table 4’x2’
Table for tea room 6’x3’
Table for dining room 8’x3 1/1’
50” locker Almirah
78” locker almirah
Book case 4 drawer
Filing cabinet whatnot type
3 seater net chair
Centre table 42”x21”
Wooden bed 5’x6 ¼’
Wooden bed 3’x6 ¼’
Cushioned settee
Steel big rack (Kitchen)
Side table
• Steel armed chair – 1” rounded pipe, tubular sit & back knitted with
nylon cane and arm rest
• Revolving Chair executive – 360 degree revolving , 5 wheels,
hydraulic system lifting, cushioned seat & back with soft pu handle
• Whatnot – Steel whatnot size 30”x36”x 18” with 3 shelves
• Russian sofa 3 seater – teakwood, 4” thick high density cushion in
seat and 4” thick high density cushion back
• Russian sofa 2 seater – teakwood, 4” thick high density cushion in
seat and 4” thick high density cushion back
• Russian sofa single seater – teakwood, 4” thick high density cushion
in seat and 4” thick high density cushion back
• Cushioned visitor chair- steel cushioned with PU arm capsule type
• Table 6’x3’having three drawer one side, one cupboard on other
side, top
• Table 5x3 fitted with top & three drawer on one side
• 50” locker Almirah
• 78” locker almirah
• Book case 65”x33”x12” 4 compartment with locking
• 3 seater steel net chair combined
• Computer table standard
• Computer chair without arms
• Centre table 3x2 for sofa set
• Steel slotted angle rack size 78”x36”x15” with 6 adjustable self made
of 20 gauge sheet
9

255 Pedal paddy thresher With double ball bearing and steel patti 12 nos.
256 Power paddy thresher
With winnowing and
straw walker,
mounted on rubber
tyre (6.00X 16 size)
trolley with 8 Hp aircooled
diesel engine
257 Power multi crop
thresher
Mounted on 2 tyre
(6.00 x 16 size) cart
type trolley fitted with
10 Hp air cooled
diesel engine having
following specification
Type : Fully enclosed threshing cylinder
Fly wheel : One
Concave : Clearance adjusting
Cylinder : Fully enclosed cylinder with 6 resp. bar
RPM : 650
Drive : V belt
Capacity : 750-900 kg/hour
Drum size : 18”X30”
No. of rows in rotor : 6
No. of stud in rotor : 36
No. of fly wheels : 2
No. of blower : 3
Perforated sheet size : 22”x36”
Fly wheel size : 24”
Required for threshing : Paddy , Wheat, Oilseeds,
Pulses, Millets
258 Zero Tillage machine Zero Tillage machine
259 Laser Land leveler Laser Land leveler
260 Weighing machine Up to 10 kg
Up to 200 kg
261 Power reaper Power reaper
262 Rotavator 24/36 blade, 25 HP Tractor
263 Cultivator 9 time
264 Disk harrow Offset disk harrow 14 disk
265 Icc Flaking Machine Production : 50 kg/ 24 hours
Bin Capacity : 15 KG
Small foot print
With pre filter for removing iron and other water impurities.
266 Auto NB Analyser with
accessories for
digestion system
Automatic 12 place microprocessor based digestion system,
Aluminium block 250 ml capacity with temperature controller PC
control automatic sequencing PC/Laptop connectivity with software
267 Water Activity Meter Measuring Range - 0.03 to 1.00 Aw (3 to 100% rh)
Measuring Time -

including EMI containing financial bid quoting prices inclusive of all taxes at the top
of envelop item no./item have must be given.
2. Tenders must be sent in sealed envelop with Tender Written on it in capital letters.
The last date of submission must be mentioned on the envelop.
3. Tender received after the due date and time will not be considered and are liable
to be rejected without assigning any reason.
4. In case of more than one items for which quotations have been given a list of items
duly signed shall be enclosed alongwith documents (Abstract of quoted
equipments).
5. The Central Purchase Committee reserves the right to reject any or all the tenders
without assigning any reason.
6. The rate should be inclusive of all taxes as mentioned in Serial no. 1. If any Vat/tax,
it should be mention separately.
7. The rates will remain operative for six months from the date of placing supply order.
8. While quoting the rate, please be sure to mention your sale tax (CST/JST/VAT)
registration number.
9. Any cutting and over writing in the tender paper should be attested and price may
be quoted separately for each items otherwise it shall not be entertained.
10. No tender will be accepted without printed catalogue and complete literature
with brand of concerned reputed firm.
11. The earnest money @ 2% of the total quoted value in shape of BD/NSC in favour of
Purchase Officer, Birsa Agricultural University, Ranchi only will have to be deposited
alongwith the tender by the suppliers. Tenders received without earnest money will
not be considered and are liable to be rejected without assigning any reason.
12. The security money @ 5% of the quoted in shape of BD/NSC will have to be
deposited by the supplier whose tender will be accepted.
13. Security money shall be forfeited if ordered items/ materials are not supplied in
scheduled time and as per specification.
14. Payment will be released after supply of order items successfully.
15. Guarantee period must be mentioned for each item.
16. Place of delivery, FOR-Destination.
17. Time of delivery-30 days after receiving supply order.
18. The sealed tender should be sent to Chairman, C.P.C., Birsa Agricultural University,
Kanke, Ranchi-834006, Jharkhand by Registered post/Speed Post/
Registered Courier only. No tender by hand will be accepted.

19. A letter of authorization of dealership of the firm/manufacturer must be enclosed
with the documents.
20. The Court of Ranchi Jharkhand State only will have the jurisdiction to deal with and
decide any legal matter of depute what so ever arising or of in dispute of the
control.
21. Name of the manufacturer, manufacturing the equipment with full address may
please be mentioned.
22. In case of unforeseen circumstances the tender will be opened on the next
working day.
I have read the terms and conditions of the tender, as given above, very carefully
and shall be the same.
Signature of the tenderer with stamp