betalink k1
betalink k1
betalink k1
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Range of Adhesion Suitable for use on sheet metal and coated,<br />
aluminium stainless steel, GRP, PUR-RIM,<br />
Polycarbonate, PUR-plasticised, PUR-hard,<br />
PVC, wood and glass.<br />
Do not use for direct-glazing<br />
Surface Preparation<br />
BETAPRIME glass<br />
BETAPRIME paint/plastic<br />
BETAPRIME special plastic<br />
Over-paintabillity<br />
- paints without alcohol:<br />
- paints containing alcohol:<br />
All surfaces must be free from dirt, dust,<br />
grease and oil. Use primers if necessary.<br />
Usually a cleaning with BETACLEAN 3350 is<br />
sufficient. In special cases and for a long<br />
term adhesive-bonded joint, partial<br />
pretreatment with activators and/or primers<br />
is necessary. We recommend BETAPRIME glass,<br />
BETAPRIME paint/plastic and BETAPRIME special<br />
plastic. Please call our technical<br />
department.<br />
Attention: Do not use alcohol or<br />
nitro-dilution for cleaning.<br />
glass<br />
paint, PUR, PUR-RIM, ABS, ABS modified,<br />
Noryl, Metton, glass-fibre reinforced<br />
polyester-resin, glass-fibre reinforced<br />
epoxy-resin.<br />
Polyolefines (PP, PP-EPDM)<br />
Preliminary tests are recommended<br />
approx. 20 min after application<br />
approx. 60 to 90 min<br />
Preliminary tests are recommended<br />
Packaging Cartridge with 40 ml, 80 ml and 300 ml,<br />
sausages with 40 ml and 80 ml<br />
Dispensing Equipment For 300 ml cartridges use hand or air gun. We<br />
recommend air guns with rams. (i.e.<br />
BETAPRESS)<br />
For 40 and 80 ml cartridges applications use<br />
the squeeze-pipe and the<br />
multi-functional-nozzle for opening the<br />
membrane and the cap.<br />
Cleaning after application Uncured BETALINK K1 can be removed with<br />
BETACLEAN Spoiler. Cured BETALINK K1 can only<br />
be removed mechanically. Immerse tools in<br />
BETACLEAN Spoiler.<br />
Attention: Do not use BETACLEAN Spoiler for<br />
surface preparation.<br />
Shelf life 9 months with storage at +5 to +25°C in<br />
unopened containers<br />
Protection measures See health and safety data sheet.<br />
Dow Automotive Quality Management<br />
Quality is our highest priority. Dow Automotive works with a highly modern Quality Management System which<br />
meets all international requirements of QS 9000, VDA-6 and ISO 9001.<br />
The above information implies no liability as to the usage of our products. Since the applications,<br />
utilisation and processing of our products are beyond our control, the information given is not intended to<br />
replace your own trials with the products to establish their suitability for your particular application.<br />
Our liability is limited to the value of the products supplied by us and used by you.<br />
The information on this data sheet corresponds to the latest findings and supersedes all previous versions.<br />
Dow Automotive AG Dow Automotive (Italia) S.r.l Dow Automotive (France) S.A.<br />
CH-8807 Freienbach I-20010 Bareggio (MI) F-60130 Saint-Just en chaussee<br />
Tel. +41(0)55416 81 11 Tel. +39(0)2 90 36 11 66 Tel. +33(0) 3 44 77 61 00<br />
Fax +41(0)55416 82 20 Fax +39(0)2 90 27 66 98 Fax. +33(0) 3 44 77 61 61<br />
Dow Automotive AG, Techn. Datenblatt, BETALINK, Status terminated, Ausgabe 03, 23.6.99, D-10/UA, Page 2
Change language