Skin Care E

Made in Switzerland
PRO UNIT SKIN CARE

Q.Light ® Light Therapy for skin care
The Q.Light ® SKIN CARE UNIT is a cosmetic treatment system,
designed to produce young, smooth and healthy looking skin. While we
age, we begin to see visible signs of sun damage due to UV-light, time,
malnutrition and lifestyle choices, appearing in our complexion. The
Q.Light ® SKIN CARE UNIT is designed for the application of skin care
treatments in dermatological practices, aesthetic clinics, beauty salons
and for treatment at home. The main applications are:
Skin Care
Anti-Ageing
Acne Care
Cellulite care
Pain Care
Q.Light ® SKIN CARE UNIT Spezialized SKIN CARE modules
Made Made Made in in in Switzerland
Switzerland
Switzerland
Technical data Q.Light ® SKIN CARE UNIT
Device Models Q.Light ® 70 NT IR - SKIN CARE UNIT
Modules SKIN CARE, ANTI-AGEING,
ACNE CARE, CELLULITE CARE,
PAIN CARE and seperate
6 Colour Therapy Modules
Treatment Area 25 cm at max. treatment distance
Diameter Ø in cm
Light Source Patented full spectrum natural daylight source
Spectrum 385 – 1700nm
Polarization ≥ 98%
Visible Light
emission
Visible light between 385 - 780 nm
Infrarot Emission Near infrared between 780 - 1700 nm
UV emission no UV
Light Temperature Optimized power distribution over the
complete spectrum. 5300K
Certification ISO 9001 & EN 46001
CE Mark 1275
always the right spectrum

Light quality of the Q.Light ® SKIN CARE UNIT
Q.Light ® SKIN CARE UNIT emission spectrum with patented light source
technology
Transmission in %
100
80
60
40
20
0
385nm 780nm 1700nm
Q.Light ® treatment parameters with Q.Light ® SKIN CARE UNIT
Device Polarization- Treatment- Treatmentdegree
distance diameter
Q.Light®
SKIN CARE UNIT
Made in Switzerland
≥98% 25cm(max.) 25cm(max.)
≥98% 20cm 20cm
≥98% 15cm 15cm
Additional technical data for Q.Light ® SKIN CARE UNIT
Device Models Q.Light ® SKIN CARE UNIT
Voltage 230 V, 50 - 60 Hz / 110 V, 60Hz
Power Supply 50 VA max.
Saftey Class II, Type B
Power density- 40 mW/cm 2 , 2,4 Joule/cm 2 (min.) at max.
standard treatment distance
Weight 1’120g
Size 260 x 158 x 173 mm (L x B x H)
Guarantee 24 month from delivery date on
Stand-Home Stand-Standard Stand-PRO
patented light-source technology

Q.Light ® SKIN CARE UNIT Filter Module Set
The Q.Light ® SKIN CARE UNIT offers specialized treatment modules
which allows to treat specific skin conditions always with the right and
best spectrum. Insert the appropriate module into the module slot and
the Q.Light ® SKIN CARE UNIT is set for the treatment. The spectrum
developed by the specialized skin care filter modules are adjusted to
achieve adequate biological response needed to achieve best results
for the specific skin care application. With the use of these specialized Skin
Care Modules, dramatic improvements can now be accomplished
with no discomfort
Q.Light ® SKIN CARE Module / 385 - 780nm
100
Q.Light ® ANTI-AGEING Module / 385 - 1700nm
Made in Switzerland
80
60
40
20
0
100
80
60
40
20
0
Transmission in %
385 nm 780 nm
Relative Transmission in %
385 nm 780 nm 1700 nm
Q.Light ® ACNE CARE Module / 385 - 500nm
100
Q.Light ® CELLULITE CARE Module / 550 - 1700nm
Q.Light ® PAIN CARE Module / 580 - 1700nm
80
60
40
20
0
100
80
60
40
20
0
100
80
60
40
20
0
Transmission in %
385 nm 500 nm
Relative Transmission in %
550 nm 780 nm 1700 nm
Transmission in %
385 nm 780 nm 1700 nm
specislized Filter modules

The Q.Light ® SKIN CARE MODULE for skin care treatments to
combat negative environmental and lifestyle influences
The Q.Light ® SKIN CARE module is specially designed for the
treatments of:
tense and dry feeling skin
daily skin care
smoothing skin structure
prevention of skin disorders
irritated skin
and to
stimulate the skin’s regenerative processes
optimize oxygen transport to the skin
boost ROS (Reactive Oxygen Species) in skin cells.
and before application of dermal creams and serum
Q.Light ® SKIN CARE Module
Made in Switzerland
Technical features of Q.Light ® SKIN CARE MODULe
Module Q.Light ® SKIN CARE MODULE
Treatment Area
Diameter Ø in cm
25 cm at max. treatment distance
Powering Light Patented full spectrum natural daylight
Source
Module Spectrum 385 – 780nm
Polarization ≥ 98%
Visible Light Visible light between 385 – 780nm
emission
Infrared emission No infrared
UV Emission No UV
Light Temperature Optimized power distribution over the
complete spectrum. 5300K
Certification ISO 9001 & EN 46001
CE Mark 1275
regulates cellular-processes

Light quality produced by the Q.Light ® SKIN CARE Module
Q.Light ® emission spectrum with SKIN CARE Module
Transmission in %
100
80
60
40
20
0
385nm 780nm
Q.Light ® treatment parameters & treatment dose in min. with
Q.Light ® SKIN CARE UNIT & SKIN CARE MODULE
Device Polarization Treatment Treatment Therapy
degree distance diameter dose in
min
Q.Light ® 70 NT IR
SKIN CARE UNIT
Made in Switzerland
≥98% 25cm 25cm 6
≥98% 20cm 20cm 5
≥98% 15cm 15cm 4
How to treat with Q.Light® SKIN CARE Module
General SKIN CARE
Q.Light ® SKIN CARE treat ments
support skin- and its biological
functions. As individual treatment
sessions are short, it can easily be
integrated into standard skin care
programs. Depending on the
indication the Q.Light ® SKIN CARE
treatment is applied for just a few
minutes combined with the applied
treatment
In order to use the Q.Light ® system effectively, the skin should be
cleansed before exposure to the light. The average dose applied to
skin is around 12J/cm 2 . The visible polarized light beam is given
from a distance of max. 25cm to the skin surface, for 6 minutes over
each area, at a right angle. Special dermatological- or cosmetic
creams or skin serum can be applied before or after treatment. Any
residue of cream should be wiped away if applied before the
application of Q.Light ® treatment.
The condition of skin improves notably within the first two weeks of
therapy.
Side effects and contraindications have not been reported. It is
advisable to check longer lasting skin conditions to receive additional
professional advice.
defined SKIN CARE spectrum

The Q.Light ® ANTI-AGEING module for younger,
smoother and healthier looking skin
The Q.Light ® ANTI-AGEING module is specially designed for
the following applications:
To reduce wrinkles and fine lines
To slow down ageing of skin
To boost blood circulation into the finest blood capillaries.
For stimulation and regulation of the skin’s repair mechanisms
For daily skin care of ageing skin
Against tired & dull looking skin
Against flabby skin
Before application of anti-ageing creams and serum
Against coupe rose / spider veins
Q.Light ® ANTI-AGEING module
Made in Switzerland
Technical features of Q.Light ® ANTI-AGEING Module
Module ANTI-AGEING CARE
Treatment Area Ø 25 cm at max. treatment distance
standard
Powering Light Patented natural daylight spectrum light
Source source
Spectrum 385 – 1700nm
Polarization ≥ 98%
Visible Light
emission Visible light between 385 – 780nm
Infrared emission Near infrared between 780 – 1700nm
UV emission none
Light Temperature Optimized power distribution over the
complete spectrum. Practically cold light
Certification ISO 9001 & EN 46001
CE Mark 1275
activates microcirculation

Light quality produced by the Q.Light ® ANTI-AGEING module
Q.Light ® emission spectrum with ANTI-AGEING module
Transmission in %
100
80
60
40
20
0
385nm 780nm 1700nm
Q.Light ® treatment parameters & treatment dose in min. with
Q.Light ® SKIN CARE UNIT & Q.Light ® ANTI-AGEING module
Device Polarization Treatment Treatment Therapy
degree distance diameter dose in
min
Q.Light ® 70 NT IR
SKIN CARE UNIT
Made in Switzerland
≥98% 25cm 25cm 5
≥98% 20cm 20cm 4
≥98% 15cm 15cm 3
How to treat with Q.Light ® ANTI-AGEING module
General ANTI-AGEING care
For optimal results the Q.Light ®
ANTI-AGEING treatment is applied
on a daily basis. The Q.Light ®
ANTI-AGEING light beam is
polarized, incoherent visible and
near infrared light. The average dose
applied to aged skin must be min.
12J/cm 2 .
Skin should be cleansed before exposure to the light. The light beam is
applied from a distance of max. 25cm to the skin surface for 5 minutes
over each area at a right angle. Special dermatological or cosmetic
creams or skin serum can be applied before or after treatment. Any
residue of cream should be wiped away if applied before the application
of Q.Light ® treatment.
The condition of skin improves notably within the first two weeks of
therapy.
Regeneration of ageing skin with Light therapy takes place in different
interlinking processes:
Activation of microcirculation
Regulation of cellular processes in skin and tissue
Development of new collagen & elastine fibers
Start of
therapy
Result after
8 weeks of
light therapy
Support of oxygen supply to the cells due to photomodulation of blood
Optimization of epithelialization for optimal aesthetic treatment results
defined ANTI-AGEING spectrum

The Q.Light ® ACNE CARE MODULE for effective acne care and
inflamed or infected skin
The Q.Light ® ACNE CARE module is specially designed for the
application of the following applications:
Common acne
Acne vulgaris
- acne comedonica
- acne papulopustulosa
- acne conglobata
regulation of talc production
skin impurities and inflammation
skin irritations
skin allergies irritated & nervous skin
Q.Light ® ACNE CARE module
Made in Switzerland
Technical data of Q.Light ® ACNE CARE module
Module ACNE CARE
Treatment Area 25 cm at max. treatment distance
Diameter Ø in cm
Powering Light Patented full spectrum natural daylight light
Source source
Module Spectrum 385 – 500nm
Polarization ≥ 98%
Visible Light Visible light between 385 – 500nm
emission
Infrarot emission no infrared
UV emission no UV
Light Optimized power distribution over the
Temperature complete spectrum. Cold light
Certification ISO 9001 & EN 46001
CE Mark 1275
excites porphyrin

Light quality produced by the Q.Light ® ACNE CARE module
Q.Light ® emission spectrum with ACNE CARE module
Transmission in %
100
80
60
40
20
0
385nm 500nm
Q.Light ® treatment parameters & treatment dose in min. with
Q.Light ® SKIN CARE UNIT & Q.Light ® ACNE CARE module
Device Polarisation- Treatment- Treatment- Therapy
degree distace diameter Dose in
min
Q.Light ® 70 NT IR
SKIN CARE UNIT
Made in Switzerland
≥98% 15cm 15cm 6
≥98% 10cm 10cm 5
≥98% 5cm 5cm 3
How to treat with Q.Light ® ACNE CARE Module
General acne care
Treatments with
Q.Light ® ACNE CARE
module produces a specified
spectrum in the blue range of
polarized light. This spectrum
has a favorable influence on
acne. Scientific studies and
empirical reports show
individual cases of acne
to be significantly reduced or
Before treatment
After 8 weeks
of Light Therapy
even completely healed by regular exposition to the Light. As individual
treatment sessions are very short, Q.Light ® ACNE CARE can easily
be integrated into traditional - local or systemic - regimens of acne
therapy. The average dose applied is 12 J/cm2 once a day. For optimal
results it is recommended to clean the area to be treated with a mild
cleanser. Direct the Q.Light ® beam at a right angle to the treatment
area. The treatment time per session is 6 min. at max treatment distance.
Side effects and contraindications have not been reported. It is
advisable to check longer lasting skin conditions to receive additional
professional advice.
The beneficial influence and regenerating effect of the Q.Light ®
Therapy can be used to support various kinds of skin treatments.
defined ACNE CARE spectrum

Q.Light ® Light Therapy for CELLULITE CARE
The Q.Light ® CELLULITE CARE module is specially designed for the
following applications:
Cellulite in all stages
Weakness of connective tissue
Skin and tissue with metabolic dysfunction
Skin and tissue with insufficient blood circulation
Stimulation of lyphatic system
Q.Light ® CELLULITE CARE Modul
Made in Switzerland
Technical features of Q.Light ® CELLULITE CARE Module
Module CELLULITE CARE
Treatment Aera Ø 25 cm at max. treatment distance
standard
Light Source Patented natural daylight spectrum light
source
Spectrum 580 – 1700nm
Polarization ≥ 98%
Visible Light Visible light between 550 – 780nm
emission
Infrared emission Near infrared between 780 – 1700 nm
UV emission none
Light Temperature Optimized power distribution over the
complete spectrum.
Certification ISO 9001 & EN 46001
CE Mark 1275
550 nm 780 nm 1700 nm
activates microcirculation

Light quality & power density of Q.Light ® CELLULITE CARE module
Q.Light ® emission spectrum with patented light source technology
Made in Switzerland
How to treat CELLULITE with Q.Light ®
CELLULITE CARE
For optimal results the Q.Light ®
CELLULITE CARE therapy is
applied on a daily basis. The
Q.Light ® CELLULITE CARE light
beam is polarized, orange and near
infrared light. The average dose
applied for the treatment of cellulite
must be min. 19J/cm2 Relative Transmission in %
100
80
60
40
. The light
beam is directed at a right angle to
20
the area under treatment. The
treatment area is to be cleansed
0
550nm 780nm 1700nm
properly cleansed before light
therapy is applied.
The problem
Q.Light ® treatmentparameters & treatment dose in min. with
Q.Light ® SKIN CARE UNIT & Q.Light ® CELLULITE CARE module
Device Polarization Treatment Treatment Therapy
degree distance diameter dose in
min
Q.Light ® 70 NT IR
SKIN CARE UNIT
≥98% 25cm 25cm 8
≥98% 20cm 20cm 6
≥98% 15cm 15cm 4
The Q.Light ® CELLULITE CARE
treatment is also an ideal
preparation for skin and tissue
before the application of specialized
cellulite creams and ointments.
The beneficial influence and
regenerating effect of the Q.Light ®
Therapy can be used to support
various kinds of treatments against
cellulite.
At the start of
Light therapy
Result after
3 month
defined spectrum

Q.Light ® Light Therapy for PAIN CARE
The Q.Light ® PAIN CARE module is specially designed for the
following applications:
Before laser or IPL hair removal
Before application of permanent makeup
Before application of tattoos
Before epilation
general pain care
Q.Light ® PAIN CARE module
Made in Switzerland
Technical features Q.Light ® PAIN CARE module
Module PAIN CARE
Treatment Aera Ø 25 cm at max. treatment distance
standard
Powering Light Patented full spectrum natural daylight light
Source source
Spectrum 580 – 1700nm
Polarization ≥ 98%
Visible Light Visible light between 550 – 780nm
emission
Infrared emission Near infrared between 780 – 1700 nm
UV emission none
Light Temperature Optimized power distribution over the
complete spectrum.
Certification ISO 9001 & EN 46001
CE Mark 1275
activates microcirculation

Light quality & power density of Q.Light ® PAIN CARE module
Q.Light ® emission spectrum with patented light source technology
Transmission in %
100
80
60
40
20
0
580nm 780nm 1700nm
Q.Light ® treatment parameters & treatment dose in min. with
Q.Light ® SKIN CARE UNIT & Q.Light ® PAIN CARE module
Device Polarization Treatment Treatment Therapy
degree distance diameter Dose in
min
Q.Light ® 70 NT IR
SKIN CARE UNIT
Made in Switzerland
≥98% 25cm 25cm 6
≥98% 20cm 20cm 5
≥98% 15cm 15cm 4
How to treat pain with Q.Light ®
General pain care
For optimal results the
Q.Light ® PAIN CARE
therapy should be applied
before and during the
respective treatment. The
average dose applied to the
region of pain is around
12J/cm 2 to 24J/cm 2 . The
light beam is directed at a
right angle to the area to be
treated. Q.Light ® Therapy
can be an ideal complementary
treatment to a variety of cosmetic applications for example epilation
or application of permanent makeup. Its beneficial influence on pain
reduction can affect the customers general condition positively.
Q.Light ® therapy is applied for 4 – 6 minutes exposure time onto
the area to be treated before a treatment, for example before
epilation or permanent makeup. Direct the light from a distance of
approximately 25cm at a right angle. It is recommended to apply the
light also during the treatment. By doing so practically no pain
appears.
Side effects or contraindications have not been reported.
defined spectrum

Q.Light ® SKIN CARE UNIT Colour Filter Set – 6 colour filter modules
The Q.Light ® SKIN CARE UNIT offers special dichroic colour filter
modules which allows to use the device also for colour therapy.
Brilliant colours are achieved by the combination of the patented light
source, that is powered by the Q.Light ® and the special filter modules
Made in Switzerland
Red Filter Module
Characterization
Most active and warmest colour
Global effect
Activates energy reserves in case of
mental and physical exhaustion
Orange Filter Module
Characterization
Activity and inspiration
Global effect
Stimulates creativity and self-respect
especially under stress and depression
Yellow Filter Module
Characterization
Intelligence and success
Global effect
Strengthens and motivates in tired and
moody phases
Green Filter Module
Characterization
Balance and hope
Global effect
Boosts equilibrium, composure and
stamina in weak and restless situations
Blue Filter Module
Characterization
Coolest and most relaxing colour
Global effect
Reassures and relaxes nervous
irritability and stressful strain of all nature
Violet Filter Module
Characterization
Individualism and intuition
Global effect
Unblocks, relaxes and revives in
hopeless moments
There are many ways and techniques of how to apply Q.Light ®
colour light to the human body for therapeutic and wellness
purposes. It is advisable to visit colour therapy education courses or
seminars. For first information visit www.Qlight.info
for colour therapy

B & p ® – biotechnology & photomedicine
b & p ® AG develops and manufactures specialized Light Therapy Systems for professional application and for self medication at home.
Q.Light ® SKIN CARE UNIT with patented light source technology:
Made in Switzerland
Manufactor:
b & p ® Schweiz AG
Schlossgut Wiggen
CH - 9404 Rorschacherberg
Telefon +41 (0) 71 858 20 60
Fax +41 (0) 71 858 20 61
Email info@bundp.net
Web www.qlight.info
Your Local Q.Light ® dealer:
spezialized systems