Technical Data - buchhammer-handel.de

More documents

Recommendations

Info

�� When choosing between various work tool models that can be installed onto the same machine configuration, consider work tool application, productivity requirements, and durability. Refer to work tool specifications for application recommendations and productivity information. �� × × × × × × × × × × × × × × × × × × × × × × × × × × 14 �� specifications �� × × × �� × × × × × × × × × × × × × × × ��
�� Caterpillar 3064 T turbocharged diesel engine. �� Gross power 70 95 Net power ISO 9249 67 91 EEC 80/1269 67 91 �� Bore 102 mm Stroke 130 mm Displacement 4.2 liters �� Two rocker pedals with detachable hand levers control steering and travel functions. �� controls are pilot-operated for reduced efforts left pedal and lever control left track; right pedal and lever control right track when idlers are in front, pushing both pedals or levers forward moves the excavator straight ahead when the idlers are in front, rocking both pedals or pulling both levers backward moves the excavator straight back �� Caterpillar designed and built track-type undercarriage. �� All engine horsepower (hp) are metric including front page. net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator no engine derating required below 1500 m altitude Meets Stage II EU Emission Directive 97/68/EC. �� Track width* �� 500 mm triple grouser 0.45 bar 0.47 bar 0.45 bar 600 mm triple grouser 0.38 bar 0.40 bar 0.38 bar 700 mm triple grouser 0.34 bar 0.35 bar 0.33 bar 770 mm triple grouser 0.31 bar 0.32 bar 0.30 bar 850 mm triple grouser 0.27 bar 0.25 bar * Custom product undercarriage are available. Consult your Caterpillar dealer for specifics. moving one pedal or lever more than the other, either forward or backward, results in a gradual turn moving one pedal or lever forward and the other pedal or lever backward counter-rotates the tracks for spot turns �� The operator sound level measured according to the procedures specified in ISO 6396 is 74 dB(A), for cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. �� The labeled spectator sound power level measured according to the test procedures and conditions specified in 2000/14/EC is 101 dB(A). �� Hydrostatic with independent planetary reduction. �� Swing Torque 30.4 kNm Swing Speed 12.0 rpm �� the swing mechanism is driven by a pinion gear sealed in a grease bath through a double-reduction planetary gear set swing priority and fine control are automatic �� Meets the following standard: ISO 10265:1998 �� wet, multiple-disc brakes are used on the final drive input shafts spring-applied, hydraulically released actuating a travel control simultaneously releases the brakes when the controls are released, the brakes automatically apply �� specifications 15
Page 1 and 2: ��
Page 3 and 4: �� The
Page 7 and 8: �� Cate
Page 11 and 12: �� The
Page 13: ��
Page 17 and 18: �� All
Page 19 and 20: ��
Page 21 and 22: ��
Page 23 and 24: ��
Page 25 and 26: ��
Page 27 and 28: ��

Technical Data - buchhammer-handel.de

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?