MASTER PEN DRILL - Fisch-Tools
MASTER PEN DRILL - Fisch-Tools
MASTER PEN DRILL - Fisch-Tools
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PREMIUM QUALITY SINCE 1946<br />
FISCH® Master Pen Drills are manufactured in<br />
Austria with modern CNC Machines to the highest<br />
European quality standards.<br />
<strong>MASTER</strong> <strong>PEN</strong> <strong>DRILL</strong><br />
• Made of EuropeanM2-High Speed Steel.<br />
• Drill full length of the bit in a single pass.<br />
• Unique design eliminates tear out.<br />
• No burning or chip jamming.<br />
• The deep flute shape clears the chips without repeatedly<br />
having to back the bit out during the cut.<br />
• Reduced friction by the shape of the outer flute area<br />
- made for faster drilling and less heat build up.<br />
• No vibrations, no wandering of the drill bit during<br />
the drilling process.<br />
• Shank is hardened twice for longer service life.<br />
Extended service life and duration of life<br />
The hardness of the FISCH® Master Pen Drill is very important<br />
for service life and duration of life.<br />
Hardness for longer life<br />
FISCH® conventional Pen Drill<br />
64HRC 59 HRC<br />
Service interval<br />
FISCH® conventional Pen Drill<br />
1350 holes without<br />
re-sharpening<br />
64 HRC from top to shank<br />
1000 holes without<br />
re-sharpening<br />
Made in Austria<br />
Since 1946<br />
FISCH®-<strong>Tools</strong><br />
HSS-M2<br />
<strong>MASTER</strong> <strong>PEN</strong> <strong>DRILL</strong><br />
<strong>PEN</strong> MAKER‘S BIT<br />
FASTER CUTTING - LESS HEAT -<br />
CLEANER HOLES<br />
The cutting edge geometry and flute design guides<br />
the bit straight in end grain and guarantees a clean<br />
entrance and exit hole. This leads to better chip<br />
removal than with a conventional pen drill bit.
WOOD, ACRYLIC, ALUMINUM TECHNICAL INFORMATION<br />
FISCH®-<strong>Tools</strong> Guarantees<br />
100% Premium Quality for Professionals<br />
FISCH® Master Pen Drill is designed for drilling<br />
smooth, precise holes into Wood (soft and<br />
hard wood), Acrylic and Aluminum. The actual<br />
drilling time/speed depends on the material i.e., a<br />
4” (100 mm) wood blank requires only 3 seconds<br />
to drill from end to end without any tear out or<br />
splintering!<br />
Part No. DIA<br />
INCH<br />
DIA<br />
mm<br />
OAL<br />
mm<br />
OAL<br />
INCH<br />
FLUTE<br />
LENGTH<br />
mm<br />
FLUTE<br />
LENGTH<br />
INCH<br />
013P0600150 6.00 150 5.9“ 120 4.72“<br />
013P0700150 7.00 150 5.9“ 120 4.72“<br />
013P0794150 5/16“ 7.94 150 5.9“ 120 4.72“<br />
013P0803150 LETTER<br />
„O“<br />
8.03 150 5.9“ 120 4.72“<br />
013P0873150 11/32“ 8.73 150 5.9“ 120 4.72“<br />
013P0900150 9.00 150 5.9“ 120 4.72“<br />
013P0952150 3/8“ 9.52 150 5.9“ 120 4.72“<br />
013P0992150 25/64“ 9.92 150 5.9“ 120 4.72“<br />
013P1000150 10.00 150 5.9“ 120 4.72“<br />
013P1032150 13/32“ 10.32 150 5.9“ 120 4.72“<br />
013P1072150 27/64“ 10.72 150 5.9“ 120 4.72“<br />
013P1100150 11.00 150 5.9“ 120 4.72“<br />
013P1190150 15/32“ 11.91 150 5.9“ 120 4.72“<br />
013P1230150 31/64“ 12.30 150 5.9“ 120 4.72“<br />
013P1310150 33/64“ 13.10 150 5.9“ 120 4.72“<br />
013P1400150 14.00 150 5.9“ 120 4.72“<br />
013P1500150 15.00 150 5.9“ 120 4.72“<br />
QUALITY • PRECISION• INNOVATION<br />
SINCE 1946<br />
Your FISCH®-<strong>Tools</strong>-Dealer:<br />
Ihr FISCH®-<strong>Tools</strong> Händler:<br />
FISCH®-<strong>Tools</strong><br />
Johann Eberhard Ges.m.b.H.<br />
Johann-Eberhard-Platz 1<br />
8503 St. Josef, Austria<br />
office@fisch-tools.com<br />
www.fisch-tools.com