HYSYS Operations Guide

More documents

Recommendations

Info

$MATH 209, Lab 5$

Refer to the TASC Thermal Reference guide for information about the selections available. Refer to TASC Thermal Reference guide for information about the selections available. Specification Description First Row to Shell U-Tubes Group Heat Transfer <strong>Operations</strong> 4-137 The U-tubes group allows you to select the configuration of the U-tubes. Layout Group Specify the distance between the centres of the first row tubes to the shell. The first tube row is that nearest the inlet nozzle. Last Row to Shell Specify the distance between the centres of the last row tubes to the shell. The last tube row is that furthest from the inlet nozzle. Specification Description U-Bend Orientation U-Bend Heat Transfer You can select the type of U-bend orientation from the drop-down list. There are three selections: • Default • Horizontal • Vertical You can select whether to include or exclude the heat transfer that occurs in the U-tube using the drop-down list. There are three selections: • Default • Allow for U-bend • Ignore U-bend The Layout group allows you to specify information used to design the layout of the bundle. Specification Description Normal/Full Bundle You can select what type of bundle to use from the drop-down list. There are three selections: • Default (Normal) • Normal Bundle • Full Bundle Tubes in Window You can select whether you want tubes in the window or not from the drop-down list. There are three selections: • Default (Yes) • Yes • No 4-137
4-138 Heat Exchanger Refer to the TASC Thermal Reference guide for information about the selections available. Specification Description Bundle Band Orientation Pass Partitions Group You can select the bundle band orientation from the drop-down list. There are three selections: • Default (horizontal) • Horizontal • Vertical Tube Alignment You can select the tube alignment from the drop-down list. There are four selections: • Default (if yes 45 90) • Fully aligned • Unaligned • Part aligned Layout Symmetry Pairs of Sealing Strips You can select the layout symmetry from the dropdown list. There are four selections: • Default (sym.case 1) • Symmetry (case 1) • Symmetry (case 2) • Not enforced Number of pairs of sealing strips. The Pass Partitions group allows you to specify information used to configure the pass partition. Specification Description Pass Partition Layout Vertical PP Lane Width Horizontal PP Lane Width You can select the type of pass partition from the dropdown list. There are four selections: • Not set • H Banded • Double Banded • Ribbon Banded Vertical pass partition lane width. Horizontal pass partition lane width. 4-138
Page 1 and 2:
HYSYS ® 2004.2 Operations Guide
Page 3 and 4:
Technical Support Online Technical
Page 5 and 6:
Phone and E-mail Customer support i
Page 7 and 8:
4.4 Heat Exchanger ................
Page 9 and 10:
14.5 Composite Curves Utility .....
Page 11 and 12:
1-2 Engineering 1.1 Engineering As
Page 13 and 14:
1-4 Engineering Refer to Section 1.
Page 15 and 16:
1-6 Operations For detailed informa
Page 17 and 18:
1-8 Operations For information on t
Page 19 and 20:
1-10 Operations Refer to Section 1.
Page 21 and 22:
1-12 Operations HYSYS operations ca
Page 23 and 24:
1-14 Common Property Views Refer to
Page 25 and 26:
1-16 Common Property Views contains
Page 27 and 28:
1-18 Common Property Views It is sh
Page 29 and 30:
1-20 Common Property Views Tube Bun
Page 31 and 32:
1-22 Common Property Views Object D
Page 33 and 34:
Page 35 and 36:
1-26 Common Property Views • Prop
Page 37 and 38:
1-28 Common Property Views Object I
Page 39 and 40:
Page 41 and 42:
1-32 Common Property Views For more
Page 43 and 44:
1-34 Common Property Views 4. Fill
Page 45 and 46:
1-36 Common Property Views Object D
Page 47 and 48:
1-38 Common Property Views 1-38
Page 49 and 50:
2-2 Column Operations 2.5.6 Cut Poi
Page 51 and 52:
2-4 Column Subflowsheet For detaile
Page 53 and 54:
2-6 Column Subflowsheet Independent
Page 55 and 56:
2-8 Column Subflowsheet For more in
Page 57 and 58:
2-10 Column Subflowsheet 3. Specify
Page 59 and 60:
2-12 Column Theory The following fi
Page 61 and 62:
2-14 Column Theory It is possible t
Page 63 and 64:
2-16 Column Theory Refer to Section
Page 65 and 66:
2-18 Column Theory Basic Column Par
Page 67 and 68:
2-20 Column Theory Absorber The bas
Page 69 and 70:
2-22 Column Theory Reboiled Absorbe
Page 71 and 72:
2-24 Column Theory Partial Condense
Page 73 and 74:
2-26 Column Installation Refer to S
Page 75 and 76:
2-28 Column Installation 2.3.2 Temp
Page 77 and 78:
2-30 Column Installation Refer to t
Page 79 and 80:
2-32 Column Installation Reboiled A
Page 81 and 82:
2-34 Column Installation Reflux Rat
Page 83 and 84:
2-36 Column Installation Using the
Page 85 and 86:
2-38 Column Property View Refer to
Page 87 and 88:
2-40 Column Property View When the
Page 89 and 90:
2-42 Column Property View Monitor P
Page 91 and 92:
2-44 Column Property View Further d
Page 93 and 94:
Page 95 and 96:
2-48 Column Property View The Updat
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
2-54 Column Property View For more
Page 103 and 104:
2-56 Column Property View Button Fu
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
2-62 Column Property View Maximum N
Page 111 and 112:
Page 113 and 114:
2-66 Column Property View Solving M
Page 115 and 116:
2-68 Column Property View Accelerat
Page 117 and 118:
2-70 Column Property View Type of C
Page 119 and 120:
2-72 Column Property View The follo
Page 121 and 122:
2-74 Column Property View The order
Page 123 and 124:
2-76 Column Property View column. T
Page 125 and 126:
Page 127 and 128:
2-80 Column Property View The Appro
Page 129 and 130:
2-82 Column Property View For the s
Page 131 and 132:
2-84 Column Property View Pump Arou
Page 133 and 134:
2-86 Column Property View 2.4.4 Rat
Page 135 and 136:
2-88 Column Property View Vessels P
Page 137 and 138:
2-90 Column Property View The Colum
Page 139 and 140:
2-92 Column Property View Feeds/Pro
Page 141 and 142:
Page 143 and 144:
2-96 Column Property View Profile T
Page 145 and 146:
2-98 Column Property View Profile T
Page 147 and 148:
2-100 Column Property View Data Con
Page 149 and 150:
2-102 Column Property View TBP Enve
Page 151 and 152:
2-104 Column Property View property
Page 153 and 154:
2-106 Column Property View Editing
Page 155 and 156:
Page 157 and 158:
2-110 Column Property View Before a
Page 159 and 160:
Page 161 and 162:
2-114 Column Property View Sub-grou
Page 163 and 164:
2-116 Column Property View Figure 2
Page 165 and 166:
2-118 Column Property View Equipmen
Page 167 and 168:
2-120 Column Specification Types Re
Page 169 and 170:
2-122 Column Specification Types 2.
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
2-128 Column Specification Types Re
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
2-134 Column Stream Specifications
Page 183 and 184:
2-136 Column-Specific Operations Fi
Page 185 and 186:
2-138 Column-Specific Operations Th
Page 187 and 188:
2-140 Column-Specific Operations Pa
Page 189 and 190:
2-142 Column-Specific Operations In
Page 191 and 192:
2-144 Column-Specific Operations Re
Page 193 and 194:
Page 195 and 196:
2-148 Column-Specific Operations Dy
Page 197 and 198:
2-150 Column-Specific Operations mo
Page 199 and 200:
Page 201 and 202:
2-154 Column-Specific Operations Fi
Page 203 and 204:
2-156 Column-Specific Operations Ob
Page 205 and 206:
2-158 Column-Specific Operations Co
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
2-164 Column-Specific Operations Sp
Page 213 and 214:
Page 215 and 216:
2-168 Column-Specific Operations tr
Page 217 and 218:
2-170 Column-Specific Operations It
Page 219 and 220:
2-172 Column-Specific Operations Ob
Page 221 and 222:
2-174 Column-Specific Operations Sp
Page 223 and 224:
2-176 Column-Specific Operations Ad
Page 225 and 226:
2-178 Column-Specific Operations Ea
Page 227 and 228:
2-180 Column-Specific Operations Pa
Page 229 and 230:
2-182 Column-Specific Operations Di
Page 231 and 232:
2-184 Column-Specific Operations Ef
Page 233 and 234:
2-186 Column-Specific Operations Pr
Page 235 and 236:
2-188 Column-Specific Operations di
Page 237 and 238:
Page 239 and 240:
2-192 Running the Column Run icon S
Page 241 and 242:
2-194 Running the Column Refer to E
Page 243 and 244:
2-196 Column Troubleshooting 2.9.1
Page 245 and 246:
2-198 Column Troubleshooting repres
Page 247 and 248:
2-200 References Refer to Section 2
Page 249 and 250:
3-2 Introduction 3.1 Introduction M
Page 251 and 252:
3-4 Crystalizer Operation 3.2 Cryst
Page 253 and 254:
3-6 Crystalizer Operation 3.2.1 Des
Page 255 and 256:
3-8 Crystalizer Operation Solver Pa
Page 257 and 258:
3-10 Neutralizer Operation The Crys
Page 259 and 260:
3-12 Neutralizer Operation If the e
Page 261 and 262:
3-14 Neutralizer Operation Object D
Page 263 and 264:
3-16 Neutralizer Operation For more
Page 265 and 266:
3-18 Precipitator Operation 3.4 Pre
Page 267 and 268:
3-20 Precipitator Operation Equatio
Page 269 and 270:
3-22 Precipitator Operation Paramet
Page 271 and 272:
3-24 Precipitator Operation Refer t
Page 273 and 274:
4-2 Heat Transfer Operations 4.4 He
Page 275 and 276:
4-4 Air Cooler The Air Cooler duty,
Page 277 and 278:
4-6 Air Cooler Air Cooler icon Dyna
Page 279 and 280:
4-8 Air Cooler Connections Page On
Page 281 and 282:
4-10 Air Cooler 4.1.4 Rating Tab Th
Page 283 and 284:
4-12 Air Cooler Refer to Section 1.
Page 285 and 286:
4-14 Air Cooler The information fro
Page 287 and 288:
4-16 Air Cooler The group contains
Page 289 and 290:
4-18 Air Cooler Refer to Section 1.
Page 291 and 292:
4-20 Air Cooler Criteria Value Airf
Page 293 and 294:
4-22 Air Cooler The following table
Page 295 and 296:
4-24 Air Cooler Object Description
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
4-30 Air Cooler Refer to ACOL Simul
Page 303 and 304:
Page 305 and 306:
4-34 Air Cooler The following table
Page 307 and 308:
4-36 Air Cooler Options Page This p
Page 309 and 310:
4-38 Cooler/Heater 4.2 Cooler/Heate
Page 311 and 312:
4-40 Cooler/Heater The relation is
Page 313 and 314:
4-42 Cooler/Heater Connections Page
Page 315 and 316:
4-44 Cooler/Heater Heat Loss Page R
Page 317 and 318:
4-46 Cooler/Heater 4.2.6 Performanc
Page 319 and 320:
4-48 Cooler/Heater Tables Page The
Page 321 and 322:
4-50 Cooler/Heater Specs Page The S
Page 323 and 324:
4-52 Cooler/Heater The Cooler or He
Page 325 and 326:
4-54 Cooler/Heater Refer to Section
Page 327 and 328:
4-56 Fired Heater (Furnace) To defi
Page 329 and 330:
4-58 Fired Heater (Furnace) Heat Tr
Page 331 and 332:
4-60 Fired Heater (Furnace) dM ( RP
Page 333 and 334:
4-62 Fired Heater (Furnace) For exa
Page 335 and 336:
4-64 Fired Heater (Furnace) Fired H
Page 337 and 338:
4-66 Fired Heater (Furnace) Connect
Page 339 and 340:
4-68 Fired Heater (Furnace) For mor
Page 341 and 342:
4-70 Fired Heater (Furnace) The fig
Page 343 and 344:
4-72 Fired Heater (Furnace) • she
Page 345 and 346:
4-74 Fired Heater (Furnace) Tube Pr
Page 347 and 348:
4-76 Fired Heater (Furnace) Duty Pa
Page 349 and 350:
4-78 Fired Heater (Furnace) Sub pag
Page 351 and 352:
4-80 Fired Heater (Furnace) 4.3.7 D
Page 353 and 354:
4-82 Heat Exchanger Refer to Sectio
Page 355 and 356:
4-84 Heat Exchanger Q loss = heat l
Page 357 and 358: 4-86 Heat Exchanger If the pressure
Page 359 and 360: 4-88 Heat Exchanger The Heat Exchan
Page 361 and 362: 4-90 Heat Exchanger Refer to the TA
Page 363 and 364: 4-92 Heat Exchanger Weighted Model
Page 365 and 366: 4-94 Heat Exchanger Steady State Ra
Page 367 and 368: 4-96 Heat Exchanger The Basic and D
Page 369 and 370: 4-98 Heat Exchanger Specifications
Page 371 and 372: 4-100 Heat Exchanger For more infor
Page 373 and 374: 4-102 Heat Exchanger Overall When y
Page 375 and 376: 4-104 Heat Exchanger For a more det
Page 377 and 378: 4-106 Heat Exchanger The following
Page 379 and 380: 4-108 Heat Exchanger The tube volum
Page 381 and 382: 4-110 Heat Exchanger Heat Transfer
Page 383 and 384: 4-112 Heat Exchanger The Delta P gr
Page 385 and 386: 4-114 Heat Exchanger Heat transfer
Page 387 and 388: 4-116 Heat Exchanger Refer to Secti
Page 389 and 390: 4-118 Heat Exchanger Refer to Secti
Page 391 and 392: 4-120 Heat Exchanger Parameter Desc
Page 393 and 394: 4-122 Heat Exchanger Tables Page On
Page 395 and 396: 4-124 Heat Exchanger Basic Model Th
Page 397 and 398: 4-126 Heat Exchanger the Heat Trans
Page 399 and 400: 4-128 Heat Exchanger Dynamic Specif
Page 401 and 402: 4-130 Heat Exchanger Basic Model Wh
Page 403 and 404: 4-132 Heat Exchanger The HTFS-TASC
Page 405 and 406: 4-134 Heat Exchanger Refer to the T
Page 407: 4-136 Heat Exchanger Bundle Configu
Page 411 and 412: 4-140 Heat Exchanger Specification
Page 415 and 416: 4-144 Heat Exchanger Specification
Page 417 and 418: 4-146 Heat Exchanger Specific Enhan
Page 427 and 428: 4-156 LNG 4.5 LNG The LNG (Liquefie
Page 429 and 430: 4-158 LNG This relation is similar
Page 431 and 432: 4-160 LNG LNG icon Dynamic Specific
Page 433 and 434: 4-162 LNG Connections Page The Conn
Page 435 and 436: 4-164 LNG Heat Leak/Loss Group By d
Page 437 and 438: 4-166 LNG Specs Page On the Specs p
Page 439 and 440: 4-168 LNG In the figure below is a
Page 441 and 442: 4-170 LNG For more information refe
Page 443 and 444: 4-172 LNG exchanger block. Each zon
Page 445 and 446: 4-174 LNG Each of the following pla
Page 447 and 448: 4-176 LNG Internal Heat Transfer If
Page 449 and 450: 4-178 LNG attached to the LNG unit
Page 451 and 452: 4-180 LNG The equation used to calc
Page 453 and 454: 4-182 LNG The Plot Type drop-down l
Page 455 and 456: 4-184 LNG Refer to Section 1.3.4 -
Page 457 and 458: 4-186 LNG Main Settings The Main Se
Page 459 and 460:
4-188 LNG Specs Page The Specs page
Page 461 and 462:
4-190 LNG Refer to Section 1.3.3 -
Page 463 and 464:
4-192 LNG 4.5.8 HTFS-MUSE Tab The H
Page 465 and 466:
4-194 LNG The group located on the
Page 467 and 468:
4-196 LNG • Heat Load • Design
Page 469 and 470:
4-198 LNG Field Description Dimensi
Page 471 and 472:
4-200 LNG The layer pattern itself
Page 473 and 474:
4-202 LNG The table consists of the
Page 475 and 476:
4-204 LNG The following table defin
Page 477 and 478:
4-206 LNG The group consists of the
Page 479 and 480:
4-208 References Field Description
Page 481 and 482:
5-2 Logical Operations 5.4 Control
Page 483 and 484:
5-4 Adjust 5.1 Adjust The Adjust op
Page 485 and 486:
5-6 Adjust 5.1.2 Connections Tab Th
Page 487 and 488:
5-8 Adjust For more information, re
Page 489 and 490:
5-10 Adjust When the Simultaneous S
Page 491 and 492:
5-12 Adjust iteration status. This
Page 493 and 494:
5-14 Adjust Before installing the A
Page 495 and 496:
5-16 Adjust Refer to Section 1.3.1
Page 497 and 498:
5-18 Adjust Refer to Chapter C2 - S
Page 499 and 500:
5-20 Balance The Balance Operation
Page 501 and 502:
5-22 Balance Refer to Section 1.3.5
Page 503 and 504:
5-24 Balance Heat Balance This oper
Page 505 and 506:
5-26 Balance basis. Each individual
Page 507 and 508:
5-28 Boolean Operations For more in
Page 509 and 510:
5-30 Boolean Operations 3. Double-c
Page 511 and 512:
5-32 Boolean Operations Refer to Se
Page 513 and 514:
5-34 Boolean Operations 5.3.2 And G
Page 515 and 516:
5-36 Boolean Operations 5.3.4 Not G
Page 517 and 518:
5-38 Boolean Operations 5.3.6 On De
Page 519 and 520:
5-40 Boolean Operations 5.3.8 Latch
Page 521 and 522:
5-42 Boolean Operations • Initial
Page 523 and 524:
5-44 Boolean Operations The output
Page 525 and 526:
5-46 Boolean Operations To add a ne
Page 527 and 528:
5-48 Boolean Operations Connecting
Page 529 and 530:
5-50 Boolean Operations Connecting
Page 531 and 532:
5-52 Boolean Operations Changing th
Page 533 and 534:
5-54 Boolean Operations The C&E Mat
Page 535 and 536:
5-56 Control Ops 5.4 Control Ops HY
Page 537 and 538:
5-58 Control Ops For more informati
Page 539 and 540:
5-60 Control Ops Refer to Section 1
Page 541 and 542:
5-62 Control Ops Refer to Tuning Pa
Page 543 and 544:
5-64 Control Ops Configuration Page
Page 545 and 546:
5-66 Control Ops Advanced Page Figu
Page 547 and 548:
5-68 Control Ops During the setpoin
Page 549 and 550:
5-70 Control Ops Positional Form Kc
Page 551 and 552:
5-72 Control Ops In the present aut
Page 553 and 554:
5-74 Control Ops Scheduling Page Th
Page 555 and 556:
5-76 Control Ops The alarm points s
Page 557 and 558:
5-78 Control Ops controller needs t
Page 559 and 560:
5-80 Control Ops 5.4.3 Ratio Contro
Page 561 and 562:
5-82 Control Ops Parameters Tab The
Page 563 and 564:
5-84 Control Ops Tuning Parameters
Page 565 and 566:
5-86 Control Ops The following equa
Page 567 and 568:
5-88 Control Ops the specified peri
Page 569 and 570:
5-90 Control Ops Pv were equal and,
Page 571 and 572:
5-92 Control Ops For more informati
Page 573 and 574:
5-94 Control Ops IMC Design Page Th
Page 575 and 576:
5-96 Control Ops parameters if you
Page 577 and 578:
5-98 Control Ops Signal Processing
Page 579 and 580:
5-100 Control Ops For more informat
Page 581 and 582:
5-102 Control Ops Connections Tab T
Page 583 and 584:
5-104 Control Ops When PID paramete
Page 585 and 586:
5-106 Control Ops PV and SP The PV
Page 587 and 588:
5-108 Control Ops OP ss = steady st
Page 589 and 590:
5-110 Control Ops • Reverse - Act
Page 591 and 592:
5-112 Control Ops • Ramp Duration
Page 593 and 594:
5-114 Control Ops • Use Pv units.
Page 595 and 596:
5-116 Control Ops region where the
Page 597 and 598:
5-118 Control Ops Figure 5.74 The p
Page 599 and 600:
5-120 Control Ops IMC Design Page T
Page 601 and 602:
5-122 Control Ops You need to speci
Page 603 and 604:
5-124 Control Ops An example, it is
Page 605 and 606:
5-126 Control Ops Sample and Hold P
Page 607 and 608:
5-128 Control Ops For example, if t
Page 609 and 610:
5-130 Control Ops Monitor Tab A qui
Page 611 and 612:
5-132 Control Ops 5.4.5 MPC Control
Page 613 and 614:
5-134 Control Ops Refer to Section
Page 615 and 616:
5-136 Control Ops The mode of the c
Page 617 and 618:
5-138 Control Ops PV: Min and Max F
Page 619 and 620:
5-140 Control Ops Setpoint Ramping
Page 621 and 622:
5-142 Control Ops The Remote Sp opt
Page 623 and 624:
5-144 Control Ops value. Similarly,
Page 625 and 626:
5-146 Control Ops Notice that it is
Page 627 and 628:
5-148 Control Ops MPC Process Model
Page 629 and 630:
5-150 Control Ops Field Description
Page 631 and 632:
5-152 Control Ops MPC Control Type
Page 633 and 634:
Page 635 and 636:
5-156 Control Ops • The CCF file
Page 637 and 638:
Page 639 and 640:
5-160 Control Ops Feed Forward (FF)
Page 641 and 642:
5-162 Control Ops Object Descriptio
Page 643 and 644:
5-164 Control Ops Object Descriptio
Page 645 and 646:
5-166 Control Ops Refer to the DMCp
Page 647 and 648:
5-168 Control Ops Operation Tab The
Page 649 and 650:
Page 651 and 652:
5-172 Control Ops The Valve Paramet
Page 653 and 654:
5-174 Control Ops From Utility Flui
Page 655 and 656:
5-176 Digital Point Digital Control
Page 657 and 658:
5-178 Digital Point Refer to Sectio
Page 659 and 660:
5-180 Digital Point Figure 5.120 Au
Page 661 and 662:
5-182 Digital Point The following i
Page 663 and 664:
5-184 Digital Point Refer to Sectio
Page 665 and 666:
5-186 Parametric Unit Operation For
Page 667 and 668:
5-188 Parametric Unit Operation Con
Page 669 and 670:
5-190 Parametric Unit Operation Inp
Page 671 and 672:
5-192 Parametric Unit Operation Fig
Page 673 and 674:
5-194 Parametric Unit Operation Inp
Page 675 and 676:
5-196 Parametric Unit Operation For
Page 677 and 678:
5-198 Recycle Recycle icon 5.7.1 Re
Page 679 and 680:
5-200 Recycle For more information,
Page 681 and 682:
5-202 Recycle The Transfer Directio
Page 683 and 684:
5-204 Recycle Numerical Parameters
Page 685 and 686:
5-206 Recycle your flowsheet, but a
Page 687 and 688:
5-208 Recycle For more information
Page 689 and 690:
5-210 Recycle interconnected and ne
Page 691 and 692:
5-212 Recycle To access the Recycle
Page 693 and 694:
5-214 Recycle Recycle Setup Tab The
Page 695 and 696:
5-216 Selector Block Selector Block
Page 697 and 698:
5-218 Selector Block Refer to Secti
Page 699 and 700:
5-220 Selector Block The Inverse Co
Page 701 and 702:
5-222 Set 5.9 Set The Set is an ope
Page 703 and 704:
5-224 Set Figure 5.151 HYSYS solves
Page 705 and 706:
5-226 Spreadsheet Refer to Section
Page 707 and 708:
5-228 Spreadsheet Refer to the Calc
Page 709 and 710:
5-230 Spreadsheet Log Function Meth
Page 711 and 712:
5-232 Spreadsheet For example, supp
Page 713 and 714:
5-234 Spreadsheet Enumeration in Sp
Page 715 and 716:
5-236 Spreadsheet • Right-click a
Page 717 and 718:
5-238 Spreadsheet Refer to Section
Page 719 and 720:
5-240 Spreadsheet the process varia
Page 721 and 722:
5-242 Spreadsheet Spreadsheet Funct
Page 723 and 724:
5-244 Stream Cutter For more inform
Page 725 and 726:
5-246 Stream Cutter Changing Fluid
Page 727 and 728:
5-248 Stream Cutter The propagation
Page 729 and 730:
5-250 Stream Cutter First consider
Page 731 and 732:
5-252 Stream Cutter Refer to Sectio
Page 733 and 734:
5-254 Stream Cutter For more inform
Page 735 and 736:
5-256 Stream Cutter Once you have s
Page 737 and 738:
5-258 Stream Cutter Imbalance Info
Page 739 and 740:
5-260 Stream Cutter Refer to Sectio
Page 741 and 742:
5-262 Transfer Function Combination
Page 743 and 744:
5-264 Transfer Function Refer to Se
Page 745 and 746:
5-266 Transfer Function The Operati
Page 747 and 748:
5-268 Transfer Function Delay Page
Page 749 and 750:
5-270 Transfer Function Refer to th
Page 751 and 752:
5-272 Transfer Function 2nd Order P
Page 753 and 754:
5-274 Transfer Function K = amplitu
Page 755 and 756:
5-276 Transfer Function Refer to Se
Page 757 and 758:
5-278 Common Options Refer to Secti
Page 759 and 760:
5-280 Common Options Figure 5.197 T
Page 761 and 762:
5-282 Common Options Refer to Chapt
Page 763 and 764:
6-2 Optimizer 6.1 Optimizer HYSYS c
Page 765 and 766:
6-4 Optimizer Refer to Section 6.2
Page 767 and 768:
6-6 Original Optimizer Refer to Sec
Page 769 and 770:
6-8 Original Optimizer For informat
Page 771 and 772:
6-10 Original Optimizer Parameters
Page 773 and 774:
6-12 Original Optimizer 6.2.5 Optim
Page 775 and 776:
6-14 Original Optimizer BOX Method
Page 777 and 778:
6-16 Original Optimizer Fletcher Re
Page 779 and 780:
6-18 Hyprotech SQP Optimizer Refer
Page 781 and 782:
6-20 Hyprotech SQP Optimizer The St
Page 783 and 784:
6-22 Hyprotech SQP Optimizer • It
Page 785 and 786:
6-24 Selection Optimization For mor
Page 787 and 788:
6-26 Selection Optimization Stochas
Page 789 and 790:
6-28 Selection Optimization Branch
Page 791 and 792:
6-30 Selection Optimization The Con
Page 793 and 794:
6-32 Selection Optimization The bra
Page 795 and 796:
6-34 Example: Original Optimizer Ma
Page 797 and 798:
6-36 Example: Original Optimizer
Page 799 and 800:
6-38 Example: Original Optimizer He
Page 801 and 802:
6-40 Example: Original Optimizer Op
Page 803 and 804:
6-42 Example: Original Optimizer Ad
Page 805 and 806:
6-44 Example: MNLP Optimization Ref
Page 807 and 808:
6-46 Example: MNLP Optimization The
Page 809 and 810:
6-48 Example: MNLP Optimization Sin
Page 811 and 812:
6-50 Example: MNLP Optimization Def
Page 813 and 814:
6-52 Example: MNLP Optimization Dep
Page 815 and 816:
6-54 Example: MNLP Optimization 14.
Page 817 and 818:
6-56 Example: MNLP Optimization 9.
Page 819 and 820:
6-58 References 6.7 References 1 Bo
Page 821 and 822:
7-2 Piping Operations 7.4.3 Rating
Page 823 and 824:
7-4 Compressible Gas Pipe • Energ
Page 825 and 826:
7-6 Compressible Gas Pipe The Compr
Page 827 and 828:
7-8 Compressible Gas Pipe For more
Page 829 and 830:
7-10 Compressible Gas Pipe Refer to
Page 831 and 832:
7-12 Compressible Gas Pipe Refer to
Page 833 and 834:
7-14 Compressible Gas Pipe Prior to
Page 835 and 836:
7-16 Mixer Mixer icon The resultant
Page 837 and 838:
7-18 Mixer Connections Page On the
Page 839 and 840:
7-20 Mixer Refer to Section 1.3.6 -
Page 841 and 842:
7-22 Mixer Refer to Section 1.3.3 -
Page 843 and 844:
7-24 Pipe Segment Contact your Aspe
Page 845 and 846:
7-26 Pipe Segment Delta P Method 1:
Page 847 and 848:
7-28 Pipe Segment Diameter Informat
Page 849 and 850:
7-30 Pipe Segment U = overall heat
Page 851 and 852:
7-32 Pipe Segment Figure 7.15 In ad
Page 853 and 854:
7-34 Pipe Segment Model Horizontal
Page 855 and 856:
7-36 Pipe Segment Once the flow reg
Page 857 and 858:
7-38 Pipe Segment Duns & Ros The Du
Page 859 and 860:
7-40 Pipe Segment Regime Model Stra
Page 861 and 862:
7-42 Pipe Segment Orkisewski Orkise
Page 863 and 864:
7-44 Pipe Segment The resulting flo
Page 865 and 866:
7-46 Pipe Segment For more informat
Page 867 and 868:
7-48 Pipe Segment The table shown b
Page 869 and 870:
7-50 Pipe Segment Viewing Segments
Page 871 and 872:
7-52 Pipe Segment Refer to Section
Page 873 and 874:
7-54 Pipe Segment The K factor from
Page 875 and 876:
7-56 Pipe Segment Removing a Segmen
Page 877 and 878:
7-58 Pipe Segment Overall HTC When
Page 879 and 880:
7-60 Pipe Segment methods be used o
Page 881 and 882:
7-62 Pipe Segment If Ground is sele
Page 883 and 884:
7-64 Pipe Segment Profiles Page The
Page 885 and 886:
7-66 Pipe Segment Slug Tool The Slu
Page 887 and 888:
7-68 Pipe Segment Slug Results Page
Page 889 and 890:
7-70 Pipe Segment Refer to Friction
Page 891 and 892:
7-72 Pipe Segment Refer to Section
Page 893 and 894:
7-74 Pipe Segment Profile Page The
Page 895 and 896:
7-76 Pipe Segment µ ρ l = liquid
Page 897 and 898:
7-78 Pipe Segment All models are ba
Page 899 and 900:
7-80 Pipe Segment entering the liqu
Page 901 and 902:
7-82 Pipe Segment Ref Comp Tab The
Page 903 and 904:
7-84 Pipe Segment Description 7.3.9
Page 905 and 906:
7-86 Pipe Segment Description VH Fa
Page 907 and 908:
7-88 Pipe Segment New fittings shou
Page 909 and 910:
7-90 Relief Valve The Relief Valve
Page 911 and 912:
7-92 Relief Valve For more informat
Page 913 and 914:
7-94 Relief Valve Valve Type Descri
Page 915 and 916:
7-96 Relief Valve where: = density
Page 917 and 918:
7-98 Relief Valve Specs Page Figure
Page 919 and 920:
7-100 Relief Valve Refer to Chapter
Page 921 and 922:
7-102 Tee The Tee property view app
Page 923 and 924:
7-104 Tee A flow ratio is generally
Page 925 and 926:
7-106 Tee Refer to Section 1.3.6 -
Page 927 and 928:
7-108 Tee Refer to Section 1.3.3 -
Page 929 and 930:
7-110 Valve much more realistically
Page 931 and 932:
7-112 Valve 7.6.2 Design Tab The De
Page 933 and 934:
7-114 Valve If you are working excl
Page 935 and 936:
7-116 Valve Valve Manufacturer Intr
Page 937 and 938:
7-118 Valve Characteristics Curve P
Page 939 and 940:
7-120 Valve The valve characteristi
Page 941 and 942:
7-122 Valve The following equations
Page 943 and 944:
7-124 Valve Refer to Section 1.3.6
Page 945 and 946:
7-126 Valve Dynamic Specifications
Page 947 and 948:
7-128 Valve Friction Factor The Fri
Page 949 and 950:
7-130 Valve Refer to Section 2.4 -
Page 951 and 952:
7-132 Valve where: f = flow (lb/hr)
Page 953 and 954:
7-134 Valve K m (the pressure recov
Page 955 and 956:
7-136 References 8 Duns, H.Jr., and
Page 957 and 958:
8-2 Reactor Operations 8.5.5 Perfor
Page 959 and 960:
8-4 CSTR/General Reactors To overri
Page 961 and 962:
8-6 CSTR/General Reactors Property
Page 963 and 964:
Page 965 and 966:
Page 967 and 968:
Page 969 and 970:
Page 971 and 972:
Page 973 and 974:
Page 975 and 976:
Page 977 and 978:
Page 979 and 980:
Page 981 and 982:
Page 983 and 984:
Page 985 and 986:
Page 987 and 988:
Page 989 and 990:
Page 991 and 992:
Page 993 and 994:
Page 995 and 996:
Page 997 and 998:
8-42 Yield Shift Reactor There are
Page 999 and 1000:
8-44 Yield Shift Reactor For more i
Page 1001 and 1002:
8-46 Yield Shift Reactor Parameters
Page 1003 and 1004:
8-48 Yield Shift Reactor Refer to S
Page 1005 and 1006:
8-50 Yield Shift Reactor Object Des
Page 1007 and 1008:
Page 1009 and 1010:
8-54 Yield Shift Reactor = feed str
Page 1011 and 1012:
8-56 Yield Shift Reactor The compon
Page 1013 and 1014:
8-58 Yield Shift Reactor Base Yield
Page 1015 and 1016:
Page 1017 and 1018:
8-62 Yield Shift Reactor Results:Sh
Page 1019 and 1020:
8-64 Yield Shift Reactor jmin , pi
Page 1021 and 1022:
8-66 Yield Shift Reactor Design Dat
Page 1023 and 1024:
8-68 Yield Shift Reactor Base Shift
Page 1025 and 1026:
8-70 Yield Shift Reactor The inform
Page 1027 and 1028:
8-72 Plug Flow Reactor (PFR) 8.4 Pl
Page 1029 and 1030:
8-74 Plug Flow Reactor (PFR) Proper
Page 1031 and 1032:
Page 1033 and 1034:
Page 1035 and 1036:
Page 1037 and 1038:
Page 1039 and 1040:
Page 1041 and 1042:
Page 1043 and 1044:
Page 1045 and 1046:
Page 1047 and 1048:
Page 1049 and 1050:
Page 1051 and 1052:
Page 1053 and 1054:
Page 1055 and 1056:
8-100 Plug Flow Reactor (PFR) Prope
Page 1057 and 1058:
8-102 Plug Flow Reactor (PFR) Prope
Page 1059 and 1060:
9-2 Centrifugal Compressor or 9.1 C
Page 1061 and 1062:
9-4 Centrifugal Compressor or 9.1.1
Page 1063 and 1064:
9-6 Centrifugal Compressor or In th
Page 1065 and 1066:
9-8 Centrifugal Compressor or Equat
Page 1067 and 1068:
9-10 Centrifugal Compressor or Expa
Page 1069 and 1070:
9-12 Centrifugal Compressor or 9.1.
Page 1071 and 1072:
9-14 Centrifugal Compressor or If y
Page 1073 and 1074:
9-16 Centrifugal Compressor or For
Page 1075 and 1076:
9-18 Centrifugal Compressor or If y
Page 1077 and 1078:
9-20 Centrifugal Compressor or 6. F
Page 1079 and 1080:
9-22 Centrifugal Compressor or Once
Page 1081 and 1082:
9-24 Centrifugal Compressor or Figu
Page 1083 and 1084:
9-26 Centrifugal Compressor or Refe
Page 1085 and 1086:
Page 1087 and 1088:
9-30 Centrifugal Compressor or the
Page 1089 and 1090:
9-32 Centrifugal Compressor or Elec
Page 1091 and 1092:
9-34 Centrifugal Compressor or Theo
Page 1093 and 1094:
9-36 Centrifugal Compressor or Spee
Page 1095 and 1096:
9-38 Centrifugal Compressor or Powe
Page 1097 and 1098:
9-40 Centrifugal Compressor or MW =
Page 1099 and 1100:
Page 1101 and 1102:
9-44 Centrifugal Compressor or For
Page 1103 and 1104:
9-46 Centrifugal Compressor or A he
Page 1105 and 1106:
9-48 Reciprocating Compressor solut
Page 1107 and 1108:
9-50 Reciprocating Compressor The p
Page 1109 and 1110:
9-52 Reciprocating Compressor Rod L
Page 1111 and 1112:
9-54 Reciprocating Compressor Compr
Page 1113 and 1114:
9-56 Reciprocating Compressor Param
Page 1115 and 1116:
9-58 Reciprocating Compressor The S
Page 1117 and 1118:
9-60 Reciprocating Compressor Refer
Page 1119 and 1120:
9-62 Pump 9.3 Pump The Pump operati
Page 1121 and 1122:
9-64 Pump HYSYS can also back-calcu
Page 1123 and 1124:
9-66 Pump The Pump property view ap
Page 1125 and 1126:
9-68 Pump Parameters Page You can s
Page 1127 and 1128:
9-70 Pump To switch to the curve ch
Page 1129 and 1130:
9-72 Pump For more information refe
Page 1131 and 1132:
9-74 Pump Depending on the type of
Page 1133 and 1134:
9-76 Pump Figure 9.35 In the Curve
Page 1135 and 1136:
9-78 Pump To access the Curves Prof
Page 1137 and 1138:
9-80 Pump Object Description Low Sp
Page 1139 and 1140:
9-82 Pump Refer to Section 1.3.6 -
Page 1141 and 1142:
9-84 Pump Refer to Operation Model
Page 1143 and 1144:
9-86 Pump entered is only used, if
Page 1145 and 1146:
9-88 Pump Refer to Section 1.3.10 -
Page 1147 and 1148:
9-90 Pump In general, two specifica
Page 1149 and 1150:
9-92 Pump Power The duty is defined
Page 1151 and 1152:
9-94 References 9-94
Page 1153 and 1154:
10-2 Component Splitter 10.1 Compon
Page 1155 and 1156:
10-4 Component Splitter The Compone
Page 1157 and 1158:
10-6 Component Splitter Splits Page
Page 1159 and 1160:
10-8 Component Splitter For more in
Page 1161 and 1162:
10-10 Component Splitter Specs Page
Page 1163 and 1164:
10-12 Separator, 3-Phase Separator,
Page 1165 and 1166:
Page 1167 and 1168:
Page 1169 and 1170:
Page 1171 and 1172:
Page 1173 and 1174:
Page 1175 and 1176:
Page 1177 and 1178:
Page 1179 and 1180:
Page 1181 and 1182:
Page 1183 and 1184:
Page 1185 and 1186:
Page 1187 and 1188:
Page 1189 and 1190:
Page 1191 and 1192:
Page 1193 and 1194:
Page 1195 and 1196:
Page 1197 and 1198:
Page 1199 and 1200:
Page 1201 and 1202:
10-50 Shortcut Column Short Cut Dis
Page 1203 and 1204:
10-52 Shortcut Column Figure 10.33
Page 1205 and 1206:
10-54 References Column Result Desc
Page 1207 and 1208:
11-2 Solid Separation Operations 11
Page 1209 and 1210:
11-4 Baghouse Filter Baghouse Filte
Page 1211 and 1212:
11-6 Baghouse Filter For more infor
Page 1213 and 1214:
11-8 Cyclone 11.1.6 Dynamics Tab Th
Page 1215 and 1216:
11-10 Cyclone Connections Page You
Page 1217 and 1218:
11-12 Cyclone For more information
Page 1219 and 1220:
11-14 Cyclone Parameter Description
Page 1221 and 1222:
11-16 Hydrocyclone 11.3 Hydrocyclon
Page 1223 and 1224:
11-18 Hydrocyclone Connections Page
Page 1225 and 1226:
11-20 Hydrocyclone 11.3.3 Rating ta
Page 1227 and 1228:
11-22 Rotary Vacuum Filter 11.3.5 P
Page 1229 and 1230:
11-24 Rotary Vacuum Filter The Rota
Page 1231 and 1232:
11-26 Rotary Vacuum Filter For more
Page 1233 and 1234:
11-28 Rotary Vacuum Filter Refer to
Page 1235 and 1236:
11-30 Simple Solid Separator Simple
Page 1237 and 1238:
11-32 Simple Solid Separator For mo
Page 1239 and 1240:
11-34 Simple Solid Separator 11-34
Page 1241 and 1242:
12-2 Energy Stream Property View En
Page 1243 and 1244:
12-4 Energy Stream Property View Fo
Page 1245 and 1246:
12-6 Material Stream Property View
Page 1247 and 1248:
Page 1249 and 1250:
Page 1251 and 1252:
Page 1253 and 1254:
Page 1255 and 1256:
Page 1257 and 1258:
Page 1259 and 1260:
Page 1261 and 1262:
Page 1263 and 1264:
Page 1265 and 1266:
Page 1267 and 1268:
Page 1269 and 1270:
Page 1271 and 1272:
Page 1273 and 1274:
Page 1275 and 1276:
Page 1277 and 1278:
13-2 Introduction 13.1 Introduction
Page 1279 and 1280:
13-4 MASSBAL Subflowsheet MassBal i
Page 1281 and 1282:
13-6 MASSBAL Subflowsheet Reading i
Page 1283 and 1284:
13-8 MASSBAL Subflowsheet Refer to
Page 1285 and 1286:
Page 1287 and 1288:
13-12 MASSBAL Subflowsheet • Calc
Page 1289 and 1290:
Page 1291 and 1292:
13-16 Subflowsheet Property View 13
Page 1293 and 1294:
13-18 Subflowsheet Property View Fo
Page 1295 and 1296:
13-20 Subflowsheet Property View Wh
Page 1297 and 1298:
Page 1299 and 1300:
13-24 Subflowsheet Property View Re
Page 1301 and 1302:
13-26 Subflowsheet Property View do
Page 1303 and 1304:
13-28 Subflowsheet Property View Fo
Page 1305 and 1306:
Page 1307 and 1308:
14-2 Utilities 14.9.3 Performance T
Page 1309 and 1310:
14-4 Introduction For information o
Page 1311 and 1312:
14-6 Introduction Deleting a Utilit
Page 1313 and 1314:
14-8 Boiling Point Curves 14.2.1 De
Page 1315 and 1316:
14-10 Boiling Point Curves 14.2.2 P
Page 1317 and 1318:
14-12 Boiling Point Curves Details
Page 1319 and 1320:
14-14 Boiling Point Curves The Cont
Page 1321 and 1322:
14-16 CO2 Solids 14.3.1 Design Tab
Page 1323 and 1324:
14-18 Cold Properties To add the Co
Page 1325 and 1326:
14-20 Cold Properties For more info
Page 1327 and 1328:
14-22 Cold Properties 14.4.3 Dynami
Page 1329 and 1330:
14-24 Composite Curves Utility Conn
Page 1331 and 1332:
14-26 Composite Curves Utility Side
Page 1333 and 1334:
14-28 Composite Curves Utility Refe
Page 1335 and 1336:
14-30 Critical Properties The remai
Page 1337 and 1338:
14-32 Critical Properties For more
Page 1339 and 1340:
14-34 Dynamic Depressuring 14.9 Dyn
Page 1341 and 1342:
14-36 Dynamic Depressuring For more
Page 1343 and 1344:
14-38 Dynamic Depressuring 14.9.1 D
Page 1345 and 1346:
14-40 Dynamic Depressuring If you e
Page 1347 and 1348:
14-42 Dynamic Depressuring Refer to
Page 1349 and 1350:
Page 1351 and 1352:
14-46 Dynamic Depressuring OutsideU
Page 1353 and 1354:
Page 1355 and 1356:
14-50 Dynamic Depressuring Radio Bu
Page 1357 and 1358:
Page 1359 and 1360:
14-54 Dynamic Depressuring Equation
Page 1361 and 1362:
14-56 Dynamic Depressuring Operatin
Page 1363 and 1364:
14-58 Dynamic Depressuring Valve Eq
Page 1365 and 1366:
Page 1367 and 1368:
14-62 Envelope Utility For more inf
Page 1369 and 1370:
14-64 Envelope Utility For more inf
Page 1371 and 1372:
14-66 Envelope Utility The figure b
Page 1373 and 1374:
14-68 Envelope Utility 14.10.2 Thre
Page 1375 and 1376:
14-70 Envelope Utility Plots Page T
Page 1377 and 1378:
14-72 Envelope Utility Instability
Page 1379 and 1380:
14-74 Envelope Utility Non-Instabil
Page 1381 and 1382:
14-76 Envelope Utility An equimolar
Page 1383 and 1384:
14-78 Envelope Utility • The seco
Page 1385 and 1386:
14-80 Envelope Utility TV-TH-TS Env
Page 1387 and 1388:
14-82 Envelope Utility Dynamics Tab
Page 1389 and 1390:
14-84 FRI Tray Rating Utility 14.11
Page 1391 and 1392:
14-86 FRI Tray Rating Utility Gener
Page 1393 and 1394:
14-88 FRI Tray Rating Utility Min/D
Page 1395 and 1396:
14-90 FRI Tray Rating Utility Optio
Page 1397 and 1398:
14-92 FRI Tray Rating Utility Objec
Page 1399 and 1400:
14-94 FRI Tray Rating Utility DC Fl
Page 1401 and 1402:
14-96 FRI Tray Rating Utility Dumpi
Page 1403 and 1404:
14-98 FRI Tray Rating Utility Objec
Page 1405 and 1406:
14-100 Hydrate Formation Utility Th
Page 1407 and 1408:
14-102 Hydrate Formation Utility
Page 1409 and 1410:
14-104 Hydrate Formation Utility se
Page 1411 and 1412:
Page 1413 and 1414:
Page 1415 and 1416:
14-110 Hydrate Formation Utility Si
Page 1417 and 1418:
14-112 Master Phase Envelope Utilit
Page 1419 and 1420:
14-114 Master Phase Envelope Utilit
Page 1421 and 1422:
14-116 Parametric Utility 14.14 Par
Page 1423 and 1424:
14-118 Parametric Utility Refer to
Page 1425 and 1426:
14-120 Parametric Utility To add th
Page 1427 and 1428:
14-122 Parametric Utility There are
Page 1429 and 1430:
14-124 Parametric Utility The table
Page 1431 and 1432:
14-126 Parametric Utility Data Tab
Page 1433 and 1434:
14-128 Parametric Utility Object De
Page 1435 and 1436:
14-130 Parametric Utility Training
Page 1437 and 1438:
14-132 Parametric Utility Refer to
Page 1439 and 1440:
14-134 Parametric Utility The Displ
Page 1441 and 1442:
14-136 Parametric Utility The Neura
Page 1443 and 1444:
14-138 Parametric Utility Button De
Page 1445 and 1446:
14-140 Parametric Utility Embedding
Page 1447 and 1448:
14-142 Parametric Utility NN Utiliz
Page 1449 and 1450:
14-144 Pipe Sizing Connections Page
Page 1451 and 1452:
14-146 Pipe Sizing 14.15.2 Performa
Page 1453 and 1454:
14-148 Production Allocation Utilit
Page 1455 and 1456:
14-150 Property Balance Utility To
Page 1457 and 1458:
14-152 Property Balance Utility You
Page 1459 and 1460:
14-154 Property Balance Utility The
Page 1461 and 1462:
14-156 Property Balance Utility 4.
Page 1463 and 1464:
14-158 Property Balance Utility Fig
Page 1465 and 1466:
14-160 Property Balance Utility Ref
Page 1467 and 1468:
14-162 Property Table 14.18.1 Desig
Page 1469 and 1470:
14-164 Property Table Next, you nee
Page 1471 and 1472:
14-166 Property Table For more info
Page 1473 and 1474:
14-168 Property Table Click the Vie
Page 1475 and 1476:
14-170 Tray Sizing To add the Tray
Page 1477 and 1478:
14-172 Tray Sizing Therefore, a giv
Page 1479 and 1480:
14-174 Tray Sizing Row Description
Page 1481 and 1482:
14-176 Tray Sizing Refer to the sec
Page 1483 and 1484:
14-178 Tray Sizing Refer to Section
Page 1485 and 1486:
14-180 Tray Sizing 10. The Tray Sec
Page 1487 and 1488:
14-182 Tray Sizing Specs Page The S
Page 1489 and 1490:
14-184 Tray Sizing Number of Passes
Page 1491 and 1492:
14-186 Tray Sizing Foaming Factor F
Page 1493 and 1494:
14-188 Tray Sizing HETP The height
Page 1495 and 1496:
14-190 Tray Sizing Hole Pitch Hole
Page 1497 and 1498:
14-192 Tray Sizing Common Tray Para
Page 1499 and 1500:
14-194 Tray Sizing Refer to Column
Page 1501 and 1502:
14-196 Tray Sizing Click the View W
Page 1503 and 1504:
14-198 Tray Sizing 14.19.3 Dynamics
Page 1505 and 1506:
14-200 Tray Sizing The previous sec
Page 1507 and 1508:
14-202 User Properties Refer to Cha
Page 1509 and 1510:
14-204 User Properties For more inf
Page 1511 and 1512:
14-206 Vessel Sizing To add the Ves
Page 1513 and 1514:
14-208 Vessel Sizing 4. You automat
Page 1515 and 1516:
14-210 Vessel Sizing For more infor
Page 1517 and 1518:
14-212 References 14.22 References
Page 1519 and 1520:
I-2 specification types 2-120 speci
Page 1521 and 1522:
I-4 H Heat Balance 5-24 Heat Exchan
Page 1523 and 1524:
I-6 process variable source 5-102,
Page 1525 and 1526:
I-8 Strip Chart 1-30 Subflowsheet 1
Page 1527:
I-10 I-10
show all

HYSYS Operations Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?