Sport ATV - Yamaha Motor Argentina

5-64
Sport ATV
Distributed by Yamaha
1
2
3
4
1. Ballance Racing Pro Peg Heel Guards
Heel Guards are constructed from 1" (0.125" thick) aluminum
with TIG welding, strong enough to withstand the roughest
conditions. Heavy-duty 1"-wide webbing for durability. Bolts
to the Ballance Racing Pro Pegs.
Fits ’10~’11 YFZ450X, ’09~’11 YFZ450R
GYT-0SS55-90-20 $189.95
Fits ’06~’11 Raptor 700R
GYT-0SS55-90-28 $189.95
Fits ’08~’11 Raptor 250
GYT-0SS55-90-36 $179.95
Replacement Webbing
(Not shown)
Replacement webbing for both types of Ballance Racing Nerf
Bars and Heel Guards. Same webbing type as shown in
images in this section.
For Ballance Racing Nerf Bars
GYT-0SS55-90-52 $32.50
For Ballance Racing Heel Guards
GYT-0SS55-90-53 $25.00
2. Ballance Racing Pro Pegs
These pegs are constructed from strong, cold-rolled steel
with four rows of aggressive teeth with a durable black
powder coat fi nish. Pegs feature a kick-up at the end for rider
leverage and are 1" lower than stock. Drainage cut-outs at
the bottom allow dirt, mud, and water to drain from the pegs.
These Pro Pegs can be used with the Ballance Racing Pro Peg
Heel Guards.
Fits ’10~’11 YFZ450X, ’09~’11 YFZ450R
GYT-0SS55-90-22 $164.95
Fits ’06~’11 Raptor 700R
GYT-0SS55-90-30 $164.95
Fits ’08~’11 Raptor 250
GYT-0SS55-90-38 $164.95
3. Ballance Peg Extensions
Provides additional grip and comfort by adding extra rows
of teeth to the stock peg. Large 2-1/2" kick-up on the end
of peg for rider leverage. Comes with all required bolts and
spacers to bolt directly to the stock pegs. Made from strong,
wear-resistant, cold-rolled steel. No drilling required. Powdercoated
fi nish for durability.
Fits ’06~’11 Raptor 700R (Shown)
GYT-0SS55-90-29 $44.95
Fits ’08~’11 Raptor 250
GYT-0SS55-90-37 $44.95
4. Ballance Racing Front Grab Bar
This top-quality front grab bar has a closed-loop confi guration
that provides protection to the front of the machine. Front
lower angle helps prevent the front bumper from scraping the
ground in “G-out” conditions. 1" diameter (0.125" thick) tube
construction for durability. Used by Yamaha racers, including
9x Champion Bill Ballance and 7x Champion Traci Cecco.
Fits ’10~’11 YFZ450X, ’09~’11 YFZ450R
GYT-0SS55-90-50 $154.95
Fits ’06~’11 Raptor 700R
GYT-0SS55-90-51 $154.95
Fits ’08~’11 Raptor 250
GYT-0SS55-90-49 $154.95