Temporary Site Electrical Installations

a
Standard Risk Control Arrangements
O. An appointed person must inspect the installation prior to the temporary electrics going live
P. An inspection certificate must be requested for any test or inspection works carried out
No. 55 Rev 04
Page 2 of 2
Q. The electrical distribution equipment and cabling within the site cabins must be formally inspected and
tested in accordance with IEE Wiring Regulations every 12 months
On Site Distribution of Electrics
R. 240V (and higher) temporary distribution cabling will only be carried out by those qualified and
competent to do so (NICEIC/ECA/SELECT)
S. 240V (and higher) cabling shall be armoured
T. All cables must be in good order, supported adequately, have correct bending radii and be clear of
sharp objects
U. Cables must be run in such a manner as to reduce the risk of creating a trip or overhead hazard
V. The connection and the entire distribution network shall be inspected and tested in accordance with
IEE Wiring Regulations every 3 months
W. Where cables risk being damaged such as where there is heavy pedestrian or vehicular traffic they
must be adequately protected by mechanical barriers
X. Overhead cables must be adequately identified
Other Local Control Arrangements
A Balfour Beatty Company © Mansell