DNIT forFurnishing of squash court at CDLU Sirsa - Chaudhary Devi ...

27. The “contract sum” means the sum identified in the contract for the completion of
works as per contract.
28. “Contractor/ bidder’s equipment” means all appliances or machinery of whatsoever
nature materials or other things intended to form or forming part of the works.
29. “Portion of the work” means a part of the work or section of the work.
30. “Specifications” and “particular specifications” means the regulating guidelines
contained in the Haryana PWD specifications, Manual of Sewerage and Sewage
Treatment, Manual on Water Supply and Treatment published by the Central Public
Health and Environmental Engineering Organization (CPHEEO) under the Ministry
of Works and Housing, Indian Standard specifications and codes, all of latest
editions and those contained in the tender documents and also those based on good
engineering practices.
31. “Time for completion” means the time as stipulated for completion of the works or
any section or portion there-of as stated in the contract or as extended under clause
and shall be calculated from the date specified in the contract. It will be the date
when the contract enters into force for fulfillment of any obligation as per necessary
legal, financial or administrative requirements.
32. “Defect liability period” i.e. minimum 12 months means the period after actual
completion of work as mentioned in clause 7 of Chapter ‘A’ during which the
Contractor/ bidder will carry the full liability to make good to the complete
satisfaction of the Engineer-in-Charge, any defects in the completed work or any
bad work.
33. “Cost” means the amount which shall be deemed to include all overhead costs
whether incurred on or off the site, all taxes, excise duties, royalties etc. as
applicable on the materials, labour or any other item which is required to complete
the works.
34. “Temporary Works” mean temporary works of every kind required in or about the
execution of works.
35. “Permanent Works” mean the permanent works to be executed and maintained in
accordance with the Contract.
36. “Construction / Working Drawing of a particular component / item / equipment of
the means the detailed engineering drawing of that item submitted by the
Contractor/ bidder and approved by the Engineer-in-charge, CDLU, SIRSA, prior to
construction / fabrication / erection of that component, and based on which the same
shall be carried out.
37. “As-built Drawing of a particular component / item / equipment means the
engineering drawing submitted by the Contractor/ bidder prior to commissioning,
showing the actual details on which the construction / fabrication / erection of that
particular item has been carried out.
20 Contractor