Fiber Optic Passive Components - PENGG KABEL GmbH
Fiber Optic Passive Components - PENGG KABEL GmbH
Fiber Optic Passive Components - PENGG KABEL GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Splice Cassettes<br />
Splice Cassette ...-SK/121..<br />
Stripping dimensions<br />
(cm):<br />
Windings Min. Max.<br />
1 37 49<br />
1.5 54 73<br />
2 69 95<br />
2.5 86 118<br />
3 104 144<br />
3.5 116 164<br />
• Splice storage for all kinds of optical fibres<br />
• Splice cassettes can be piled one on top of the other, so they can be “leafed through” like a book<br />
• Mounting of different splice protection holders is possible through the snap-on system<br />
• Laying in an 8-shaped loop is possible<br />
• Bending radius: >35 mm<br />
• Capacity<br />
Splices 16 splice protection tubes Ø 2.5 mm (heat-shrinkable)<br />
24 sandwich splice protectors (sandwich)<br />
Splice protection holders 2x ...-SRH8, 2x ...SRH12 or 2x ...-SWH12<br />
• Reserve fibre length approx. 80 m<br />
• Material: Polypropylene<br />
• Weight: 62 g<br />
• Scope of delivery: 1 Splice cassette (excl. splice protection holder)<br />
Splice Protection Tube Ø 2.5mm, DNW-SR61/2,5/00 or LWL-SR40/2,5/00<br />
• A splice protection tube protects the splicing point (bare fibre) against mechanical damage<br />
and moisture<br />
• Design: Transparent heat-shrinkable sleeve with metal pin inside and hot-melt adhesive<br />
• Installation in splice protection holder DNW-SRH8, LWL-SRH8/M or LWL-SK223/SR..<br />
• Technical specifications:<br />
Shrinking temp. of sleeve approx. 115°C to 125°C<br />
Melting point of adhesive approx. 75°C to 85°C<br />
Hardness of the metal pin > 400 HV<br />
Dimensions after shrinking Ø 2.5 x 61 mm,<br />
Ø 2.5 x 40 mm<br />
• Scope of delivery: 1 Splice protection tube<br />
Sandwich Splice Protector, DNW-SW32<br />
• A sandwich splice protector protects the splicing point (bare fibre) from mechanical damage<br />
and moisture<br />
• Design: V-shaped metal support with permanently elastic sealing<br />
• Installation in splice protection holder DNW-SWH12, LWL-SWH12/M or LWL-SK223/SW..<br />
• Technical specifications:<br />
Max. diameter of the fibre with a primary coating: 250 µm<br />
Storage temperature -30°C to +60°C<br />
Processing temperature-5°C to +45°C<br />
• Scope of delivery: 1 Sandwich splice protector<br />
Height of the cassette: 8 mm<br />
Shown open<br />
<strong>Fiber</strong> <strong>Optic</strong> <strong>Passive</strong> <strong>Components</strong> • 10/2012 • © by Pengg Kabel <strong>GmbH</strong> • Subject to technical alterations 47<br />
Splice Cassettes