Philips Healthcare

Philips New ECG Cables and Leads Selection Guide Chapter 3 – Cables and Lead Sets
Europe (IEC Color Coding)
If you have this monitoring
device:
M3002A IntelliVue MMS X2
M3535A/M3536A
HeartStart MRx
Defibrillator/Monitor
Use Philips New Trunk
Cable
(Product Number)
Note: The monitoring
equipment must be
configured for full
10-lead functionality to
take conventional
diagnostic 12-lead.
The M1667A 10-Lead
Trunk Cable can also be
used for standard 5-lead
monitoring with the new
5-lead sets.
With one2 of Philips New
Lead Sets
(Product Number)
10-Lead Trunk Cable: 5-Lead + 5-Lead (12-pin connector)
M8102A MP2 Monitor M1663A
M1971A (ICU grabber, limb)
M8105A MP5 Monitor
Length: 6.5’ (2m) M1978A (ICU grabber, chest)
M1645A (ICU snap, limb)
M1604A (ICU snap, chest)
M3001A Intellivue
M1974A (OR grabber, limb)
Multi-Measurement Module
M1984A (OR grabber, chest)
10-Lead Trunk Cable: 6-Lead + 4-Lead (12-pin connector)
M8102A MP2 Monitor M1665A
M1681A (ICU grabber, limb)
M8105A MP5 Monitor
Length: 9’ (2.7m) M1533A (ICU grabber, chest)
M1683A (ICU snap, limb)
M1538A (ICU snap, chest)
M3001A Intellivue
Multi-Measurement Modules
Note: The monitoring
equipment must be
configured for full
M1685A (OR grabber, limb)
M1558A (OR grabber, chest)
M3002A IntelliVue MMS X2 10-lead functionality to
take conventional
diagnostic 12-lead.
The M1665A 10-Lead
Trunk Cable can also be
used for standard 5-lead
monitoring with the new
5-lead sets.
To replace Philips
Old IntelliVue
Trunk Cable
M1949A
6-Lead = limb
4-Lead = chest
3-8 Philips Medical Supplies Reference Guide http://shop.medical.philips.com