INTEGRA - Noby AS

CA-64 PTSA
Synoptic board
• connecting of up to 128 LEDs for indicating zone/partition state
of security system
• RS-232 for communication with GUARDX application
onboard switching mode power supply
•
ZONES/OUTPUTS EXPANSION MODULES FOR INTEGRA CONTROL PANELS
CA-64 E
Zone expansion module
• system expansion with 8 zones
• support for NO, NC, EOL, 2EOL/NO, 2EOL/NC zone configurations
• programmable EOL resistance value
• pulse analysis with sensitivity setting for vibration
and roller shutter sensors
CA-64 ADR
Addressable bus expansion module
dedicated independent bus for addressable detectors
• support for up to 48 addressable zones
• switching mode power supply
•
CA-64 OPS-OC
Output expansion module
• system expansion with 8 outputs:
– 8 low current OC outputs
• switching mode power supply
CA-64 OPS-R
Output expansion module
• system expansion with 8 outputs:
– 8 relay outputs
• switching mode power supply
CA-64 OPS-ROC
Output expansion module
• system expansion with 8 outputs:
– 4 relay outputs
– 4 low current OC outputs
switching mode power supply
•
www.satel.eu
CA-64 EPS
Zone expansion modules
• system expansion with 8 zones
• support for NO, NC, EOL, 2EOL/NO, 2EOL/NC zone configurations
• programmable EOL resistance value
• pulse analysis with sensitivity setting for vibration
and roller shutter sensors
• switching mode power supply
CA-64 ADR-MOD
Addressing module
• converts standard (NO, NC) detector into addressable detector
installs inside detector enclosure
• compatible with CA-64 ADR addressable bus module
CA-64 O-OC
Output expansion module
• system expansion with 8 outputs:
– 8 low current OC outputs
CA-64 O-R
Output expansion module
• system expansion with 8 outputs:
– 8 relay outputs
CA-64 O-ROC
Output expansion module
• system expansion with 8 outputs:
– 4 relay outputs
– 4 low current OC outputs