Lenze three-phase AC motors - MEYLE - Meyer Industrie Electronic ...

Technical data, motors
Rated data for operation at 50 Hz
Lenze three-phase AC motors are designed for operation on
230/400 V three-phase mains and with Lenze 8200, 8210,
9300 vector control and motec inverters.
Rated data for operation at 50 Hz
Type of protection: IP54, insulation class F
Motor type Shaft Speed Torque Power Current Supply Fre- Power- Effici- Stalling Starting Starting Moment Weight
height voltage quency factor ency torque torque current of
inertia
h
[mm]
nr [rpm]
Mr [Nm]
Pr [kW]
I
[A]
U
[V] [Hz] cos � �
MK [Nm]
MA [Nm]
IA/Ir J
[kgm
m
2] [kg]
MDòMAòò 071-12 71 1370 1.8 0.25 1.1/1.8 400/230 50 0.60 0.62 3.4 3.4 3.8 0.0006 5.9
MDòMAòò 071-32 71 1310 2.7 0.37 1.15/2.0 400/230 50 0.74 0.63 5.2 5.2 3.7 0.0008 6.6
MDòMAòò 080-12 80 1370 3.9 0.55 1.6/2.8 400/230 50 0.78 0.65 6.8 6.5 3.8 0.0016 8.6
MDòMAòò 080-32 80 1390 5.2 0.75 1.9/3.3 400/230 50 0.80 0.71 9.7 9.2 4.5 0.0019 9.88
MDòMAòò 090-12 90 1405 7.5 1.1 2.6/4.5 400/230 50 0.80 0.77 21.0 16.5 4.9 0.0026 14.0
MDòMAòò 090-32 90 1410 10.2 1.5 3.5/6.1 400/230 50 0.78 0.79 28.6 25.5 5.3 0.0034 17.2
MDòMAòò 100-12 100 1425 14.7 2.2 4.8/8.3 400/230 50 0.80 0.82 37.8 35.0 6.1 0.0057 25.0
MDòMAòò 100-32 100 1415 20.2 3.0 6.5/11.4 400/230 50 0.81 0.82 48.5 46.5 6.1 0.0065 26.0
MDòMAòò 112-22 112 1435 26.6 4.0 8.3/14.3 400/230 50 0.82 0.85 73.4 66.5 6.3 0.0118 34.0
MDòMAòò 132-12 132 1450 36.2 5.5 11.0/19.1 400/230 50 0.84 0.86 103.0 72.5 6.9 0.0290 62.0
MDòMAòò 132-22 132 1450 49.4 7.5 14.6/25.4 400/230 50 0.85 0.87 140.0 107.0 6.7 0.0350 73.0
MDòMAòò 160-22 160 1460 71.9 11.0 21.0/36.5 400/230 50 0.85 0.89 204.0 150.0 7.0 0.0610 110.0
MDòMAòò 160-32 160 1460 98.1 15.0 27.8/48.4 400/230 50 0.87 0.90 288.0 214.0 7.1 0.0750 130.0
MDòMAòò 180-12 180 1470 120.2 18.5 32.8/57.8 400/230 50 0.90 0.905 313.0 260.0 6.8 0.1350 165.0
MDòMAòò 180-22 180 1456 144.3 22.0 38.8/67.4 400/230 50 0.90 0.91 360.0 330.0 7.3 0.1550 175.0
* The motors can be operated at their rated torque in the voltage range between
360 and 440 V without thermally overloading the motor.
How operating frequency affects rated data
Please refer to the table for the rated data for operation at
50 Hz.
In the power range from 3 ... 7.5 kW, on self-ventilated
motors, please note the current derating of the
8200 motec.
The motors can be operated on 60 Hz mains. The table
below shows how the rated data is affected by the operating
frequency.
Frequency Voltage Power Speed Torque Motor starting torque
f in Hz
U
in %
P
in %
n
in %
M
in %
MAin %
Un Pn nn Mn MAN 50 100 100 100 100 100
60 100 100 120 83 70
60 120 120 120 100 100
22 Three-phase AC motors en 1/2006