OM, 2348 LS, (CA), 96043004900, 2008-03, Ride Mower - Husqvarna

More documents

Recommendations

Info

02965 02965 SERVICE AND ADJUSTMENTS 02051 A NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor. • Slide mower under tractor until it is centered under tractor. • FIRST INSTALL ANTI-SWAY BAR (S). - From right side of mower, insert anti-sway bar into hole in transmission bracket (T). A T FIG. 17 - Pivot bar towards you and insert other end of bar into hole in rear mower bracket (D). Move mower as needed to insert bar. - Secure with washer and retainer spring as shown D FIG. 18 S 02996 02995 19 A FIG. 19 • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring. • Repeat on opposite side of tractor. • ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring. • Repeat on opposite side of tractor. C • Turn steering wheel to position wheels straight forward. • ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F) and secure with retainer spring (G) through hole in link located behind the bracket. • Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J). F G D FIG. 20 E FIG. 21 H B J
SERVICE AND ADJUSTMENTS • Disengage belt tension rod (K) from locking bracket (L). • Install belt onto engine clutch pulley (M). IMPORTANT: Check belt for proper routing in all mower pulley grooves. K FIG. 22 L M C S D B A FIG. 23 20 • Engage belt tension rod (K) on locking bracket (L). <strong>CA</strong>UTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly. • Raise attachment lift lever to highest position. • If necessary, adjust gauge wheels before op er at ing mower as shown in the Operation section of this manual. M H E F
Page 1: Ride Mower 2348 LS (CA) 96043004900
Page 4 and 5: III. CHILDREN Tragic accidents can
Page 6 and 7: Key (2) Keys UNASSEMBLED PARTS (1)
Page 8 and 9: OPERATION These symbols may appear
Page 10 and 11: OPERATION The operation of any trac
Page 12 and 13: TO OPERATE MOWER (See Fig. 9) Your
Page 14 and 15: PURGE TRANSMISSION CAUTION: Never e
Page 16 and 17: TRACTOR Always observe safety rules
Page 18 and 19: NOTE: Although multi-viscosity oils
Page 22 and 23: SERVICE AND ADJUSTMENTS TO LEVEL MO
Page 24 and 25: SERVICE AND ADJUSTMENTS TO REPLACE
Page 26 and 27: SERVICE AND ADJUSTMENTS REPLACING B
Page 28 and 29: TROUBLESHOOTING POINTS PROBLEM CAUS
Page 30 and 31: TRACTOR - - MODEL NUMBER 2348LS (96
Page 46 and 47: 1. Fold this page along dotted line
Page 48 and 49: SERVICE NOTES 47
Page 50: starter ropes and tiller tines; (2)

OM, 2348 LS, (CA), 96043004900, 2008-03, Ride Mower - Husqvarna

Create successful ePaper yourself

Delete template?

Save as template?