02.02.2013 Views

Wiegandt GmbH

Wiegandt GmbH

Wiegandt GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

24<br />

Aquarium Technology and Accessories<br />

hw ®<br />

-Standard-Filter for hw ® -reverse-osmosis-units<br />

hw ® -pre-filter (5μ)<br />

hw ® -pre-filter (5μ)<br />

The hw ® -pre-filter is the standard pre-filter for the hw-reverse-osmosis systems. It<br />

consists of a special composite material designed specifically use in membrane technology.<br />

Users are urgently advised not to work with other<br />

filter media since these materials always lose particles that<br />

become stuck on the membrane surface and subsequently<br />

may lead to a significant and permanent reduction in performance.<br />

With W a max. mesh size of 5μ, it protects the membrane<br />

from the finest particles, sediments, and deposits found in<br />

tap water. These particles would otherwise destroy the fine<br />

structures of the membrane surface in a very short time and<br />

thereby render the membrane useless<br />

.<br />

The hw ® -pre-filter should be changed every 12 months to ensure optimal water flow<br />

as well as pressure on the membrane surface.<br />

Item no. Description<br />

hw-019010 hw ® -pre-filter (5μ)<br />

hw ® -activated-carbon-filter<br />

hw ® -activated-carbon-filter (active charcoal)<br />

The hw ® -activated-carbon-filter is installed in all hw-reverse-osmosis systems.<br />

Depending on the application scope of the hw-reverse-osmosis systems and the respective<br />

standards, of the water utilities, it carries out various<br />

tasks. Since the hw-polyvinyl-membrane can withstand<br />

chlorine concentrations up to 1 mg/l, this filter is usually<br />

connected to the permeate outlet of the reverse osmosis<br />

unit as the last stage to optimize the quality of the permeate.<br />

In geographic areas where the drinking water suppliers<br />

use so-called shot chlorination (southern Europe, Spain,<br />

Greece, etc.), the hw®-activated-carbon filter is installed<br />

between the hw®-micro-filter and the membrane module.<br />

Shot chlorination can result in chlorine concentrations in<br />

excess of 10 mg/l, which causes permanent damage even<br />

to the hw ® -Polyvinyl-Membrane.Der hw ® -activated-carbon filter should be replaced<br />

at least every 6 to 8 weeks depending on the removed water volume. After this<br />

duration, it is possible that the activated charcoal is permeated by bacteria, which<br />

would result in diminished water quality.<br />

Item no. Description<br />

hw-019020 hw-activated-carbon-filter (active charcoal)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!