MAC Torch - John Zink Company

TM
PILOT LIGHTER

TM
Our self-sparking,
self-contained low
NOx propane torch
solves lighting
challenges. Custom
or standard lengths
are available in this
hand-held, reliable
unit. MAC Torch is
simple to use with
an intense flame
that won’t “flame
out” on the job.
Safety
Safety is the key issue in all combustion
systems. Filling a heater with fuel before
the pilots are lit spells certain disaster.

Engineered Solutions for
your Combustion System
Designed by John Zink Company’s ® most
experienced combustion engineers –
fine-tuned in the field.
MACTM Torch eliminates these typical problems:
• Difficulty lighting due to high winds
or drafts
• Flames that blow out in windy or
drafty conditions
• Ignited rags falling off the lighting
wand outside the burner and creating a
safety hazard
MAC Torch...light pilot lights and burners
safely and easily – the first time!
Features
• Light weight and easy to handle
• Small – fits in a 3/4” opening
• Self-contained – no batteries required
• Self-sparking
• Rugged construction – made for plant use
• Wind and draft proof
• Self-regulated fuel flow
• Intense low NOx flame
• Custom lengths available
Ordering MAC Torch is easy...
Call 918-234-5807 or fax your inquiry to
918-234-1932.
Standard lengths:
3 ft PN 1056256
4 ft PN 1039162
6 ft PN 1056254
Custom lengths available
John Zink ® also manufactures products for other
applications, including Flares, Vapor Control
and Thermal Oxidizers.
For more information on our other products,
call 800-755-4252.
John Zink Company, LLC
P.O. Box 21220
Tulsa, OK 74121
www.johnzink.com
Igniter Tip
Fuel
Connection
TM