Capture Jet™ Hood with Side-Jet Technology - Halton

9
1
10
Construction
3 4 5
6 7 8
The KVI kitchen canopy comprises a Capture Jet unit
with side jets, a Capture Jet centrifugal fan
(optional), an IP65 light fitting, adjustment dampers,
airflow measurement taps and a KSA grease
separator.
All visible parts of the canopy are manufactured from
polished stainless steel AISI 304 and the unexposed
parts from galvanised steel. Joints on the lower edge
are fully welded.
A collection tray or a drain tap is fitted into the grease
drain channel in order to enable the removal of the
grease and dirt extracted by the KSA multi-cyclone
separator.
The Capture Jet air plenum is thermally insulated
using non-fibre-releasing material to prevent vapours
KVI - Capture Jet Hood with Side-Jet Technology
2
2
CODE DESCRIPTION
1 Outer casing – visible parts in stainless steel AISI 304
2 Exhaust air connection and adjustment damper
3 Capture Jet fan and grille
4 Access hatch
5 Light fitting with electrical junction box
6 Capture Jet nozzles
7 KSA grease filter
8 Grease collection tray or drain tap
9 Thermal insulation
10 Access hatch
from condensing on the inner face of the canopy
above the cooking equipment.
Testing and balancing taps (TAB) for flow
measurement are fitted to the exhaust plenum and
the Capture Jet air plenum.
The new Capture Jet family is manufactured in the
form of modular sections. Large canopies are
assembled using a combination of separate modules
without any beams between the modules, meaning
that one long section is created, which is aesthetically
preferable.
The modular sections make transportation and site
handling easier.
20/KVI/0000/0408/EN