Coating Reference Handbook - Hempel

HEMPEL
PROVIDABLE EQUIPMENT E5
Equipment Type Comments
DFT-Gauge Magnetic and A straigthforward none-electronic should be
computer available for jobs requiring non-spark equipment.
electronic A memory- and statistical dft-gauge should be
available for heavy documentation jobs like
tank coatings and containers, which would
otherwice be too time consuming.
ISO 8501-1:1988 Surface preparation grades.
Being a pictorial standard, a copy MUST be
available to you in case of disputes of your
judgement.
ISO 8501-2:1995 Preparation grades for other steel surface
conditions than ISO 8501-1:1988, ie shopprimed
surfaces and old painted surfaces. Note text is
important. Photoes mostly examples.
HEMPEL'S Photo Reference:
HMP-STD*WJPHOTO*01-97
Water Jetting
RUGOTEST or
ISO 8503 or
Keane Tator
Comparator.
Surface roughness comparators.
Being a comparator standard, a copy MUST be
available to you in case of disputes of your
judgement.
Usually only the one most relevant in your area
is necessary. (Consult also pages R5)
Pocket Microscope
with ligth.
Magnification approx 10 x
Thermohydrograph
(°C + %RH) with
one weeks run.
To be used for monitoring application and curing
conditions eg at tank coating jobs.
When in use protect against contamination from
blasting and painting.
X-cut template In accordance with ISO2409 / ASTM D 3359.
Measuring Tape
25 mtrs
Conductivity For evaluation of abrasives and possible surface
Meter contamination in connection with eg tank coating
jobs.
Bresle For evaluation of possible surface contamination
Samplers in connection with eg tank coating jobs.
For use consult page R6c and standard
ISO 8502-6/ISO 8502-9.
Spare Parts for Batteries, bulbs, thermometers, pH-strips,
personal kits marking chalk, note books, small plastic bags
for samples, films, filters for respiratory masks,
skin protective cream, working gloves.
Replenishments for medicine chests.
INSPE5 ed4 28/11/06 EMi