30 - ppw Handel GmbH

Tool description milling tools
Symbolerklärung / Technical references
Explication des symboles / Simboli / Referencias técnicas
PROTOSTAR FLASH Endmill with front radius, for roughing, with high feed
PROTOSTAR Qmax Roughing endmill, new generation
PROTOSTAR ULTRA Endmill for hard machining
AL25 End mill for AL- and AL-alloy, = 25°
AL Kordel G30 Roughing cutter with coarse round profile radially relieved
for AL- and AL-alloys, = 30°
AL RAPAX G40 Roughing / finishing cutter with flat coarse profile radially
relieved for AL- and AL-alloys, = 40°
H50 Tool type for tool application groups acc. to DIN 1836-H, = 50°
HNR KORDEL F30 Roughing cutter with fine flat profil radially relieved for tool
application groups acc. to DIN 1836-HR/NR, = 30°
HSC 30 Tool type for tool- application in acc. to DIN 1836-H,
to be qualified for HSC, = 30°
INOX U40 Tool type for stainless steel and alloyed tool steel, undersize, = 40°
INOX V40 Tool type for stainless steel and alloyed tool steel, full size, = 40°
N45 Tool type for tool- application in acc. DIN 1836-N, = 45°
NF RAPAX G25 Roughing / finishing cutter with coarse, flat profil radially relieved for
tool application groups acc. to DIN 1836-NF, = 25°
NR KORDEL G30 Roughing cutter with coarse round profile radially relieved relieved for
tool application groups acc. to DIN 1836-NR, = 30°
NS 30 Roughing / finishing cutter with flat chip- breaker profile,
cut direction right hand, = 30°
U30 Tool type, undersize, = 30°
V30 Tool type, full size, = 30°
W40 Tool type for tool application groups acc. to DIN 1836-W, = 40°
FS Tool type for application group DIN 1836-W, = 45°
W40 Tool type for application group acc. to DIN 1836-W, = 40°
2