EP-3N EP-5N EP-9N EP-12N EP-15N P-3N P-5N P-9N P-12N P-15N

position the fan operates continuously. Whenthe switch is in the position the thermostatcontrols both the heater and the fanoperation by switching the heater and the fanoff when the desired temperature is reached.To pre-set the switching temperature of thethermostat:1. Before making electrical connection for thefirst time ensure that the Voltage andFrequency of the electrical supply matchesthat of the appliance data plate label.2. Turn the thermostat switch up to the maximumheating position.3. Select the fan and heater output level asrequired. This switches the appliance ON.4. The first time the appliance is switched ON, asabove, the surrounding environment will heatup accordingly. When the desired temperatureof the environment has been reached,turn the thermostat switch down until a"click" is heard. The unit will switch OFF.When the thermostat is in this position theappliance will automatically switch ON andOFF to maintain this desired temperature.5. To turn the unit off, turn the rotary switch tothe OFF (O) position.NOTE: Both the 12 and 15kW portable fanheaters incorporate a thermostat with two stageheating steps. This feature provides animprovement in the surrounding air temperaturedifferential, as well as a saving in energy.AUTOMATIC OVERHEAT DEVICEAll appliances incorporate an internal Over HeatProtection Device. This safety device will switchthe heating OFF in the case of the appliance overheating. When the appliance has been switchedOFF by this safety operating device reconnectioncan only commence after 15 minutes or until theunit has cooled down sufficiently. IF THEAPPLIANCE HAS BEEN SWITCHED OFF BY THISSAFETY OPERATING DEVICE THEN THE CAUSEMUST BE INVESTIGATED. To reset the automaticsafety overheat device simply press theRESET button located on the front casing faciafig(4), after which the unit should operate asnormal. If after this device has been activated,the appliance does not work properly thendisconnect the unit from the mains electricalsupply and contact the S&P Technical AssistanceService.MAINTENANCE– IMPORTANT : BEFORE CONDUCTING ANYMAINTENANCE OR CLEANING ENSURE THEAPPLIANCE IS DISCONNECTED FROM THEMAINS ELECTRICAL SUPPLY.– To ensure long and trouble free operation wedo however recommend that the intake andexhaust air vents are regularly checked toensure the is no build-up of dust or debris.TIP: With the appliance switched OFF, use avacuum cleaner to suck away any dust ordebris from inside the air intake and exhaustvents.– To clean the appliance simply wipe with adamp (not wet) cloth. Do Not Use anyabrasives or solvents.– Do Not disassemble the unit as this willinvalidate the S&P guarantee.– If the EC heaters are being used in environmentswith high relative humidity levels wewould recommend that the electricalconnections and heating elements areregularly checked for any build-up of wateror condensation. When disconnected fromthe electrical supply simply wipe the heaterparts with a dry lint free cloth.– If the units have not been used for aprolonged period of time within environmentswith high levels of relative humidityensure that there is no build-up of condensationon the heater elements before reconnectionto the electrical supply.IMPORTANT: Due to the nature of the appliance,the unit must be cleaned and checked at leastonce every year (operating or non operating) toensure trouble free safe operation.Standards: All model comply with the requirementsof standard; for electromagnetic compatibilityand interference.