You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SAFETY - Fig. 7 to 12<br />
English<br />
Fig. 7 – PREFER USE OF THE HP CLEANER'S FLEXIBLE EXTENSION CORD TO AN<br />
EXTENSION CORD REEL!<br />
An extension cord reel with under-dimensioned electrical cable sections results in overheating of<br />
the motor: All the more if the cable is left coiled on the reel!<br />
Should it be necessary to use an extension cord, be sure to unwind the cable<br />
completely and that the latter's features are at least as follows:<br />
� Minimum cross section of the wires: 2.5<br />
mm².<br />
� Maximum length of the cable: 15 m.<br />
� Earthing pin OBLIGATORY.<br />
� WATERPROOF socket.<br />
Fig. 8 – NEVER USE damaged or badly connected cables.<br />
Fig. 9 – Before starting up or before the first use, check that your electrical wiring complies<br />
with safety standards and that the voltage of the electrical supply network is the same as the<br />
one specified on the data plate of the device. Your product is protected against electric shock in<br />
compliance with the standards of CLASS I.<br />
Minimum requirements: 215 to 230V / 50 Hz - 20 A - Differential of 30mA /<br />
30ms.<br />
The product is equipped with an asynchronous motor which generates an amperage peak at<br />
start-up: It is hence necessary that your electrical wiring is able to "absorb" this peak.<br />
� Should your electrical network need to be adapted, have it done by a specialist, in<br />
compliance with the latest specifications and standards.<br />
� It is recommended that the electric supply to the cleaner should include a residual<br />
current device that will interrupt the supply if the leakage current to earth exceeds<br />
30mA for 30ms.<br />
Fig. 10 & 11 – The electrical equipment of the device is protected from water sprays. It is<br />
however not recommended to use the device in the rain or to direct the water jet towards the<br />
HP cleaner (water under pressure penetrates more easily): Risk of electric shock!<br />
Fig. 12 – NEVER ROLL OVER OR GO OVER THE HP HOSE WITH "HEAVY" OBJECTS :<br />
The internal metal braiding of the HP hose would be damaged and could break due to<br />
the pressure...<br />
FURTHER RECOMMENDATIONS :<br />
� NEVER pull on the electric cable of the device or its HP hose to move the device.<br />
� Never use the device if the high pressure hose is damaged.<br />
24
Change language