Additif au manuel T

4 938989/0
Addition to T Programming manual - 938820/5
1 Changes to Rigid Tapping 25
1.1 Review: Rigid Tapping Cycle: G84 25
1.2 Programming the Cycle 25
1.3 Stopping the Rigid Tapping Cycle 25
1.4 Other Changes and Corrections 26
2 Rigid Tap Removal 27
2.1 Functional Description 27
2.1.1 Use 27
2.1.2 Programming the Cycle 27
2.1.3 Detectable Errors 28
2.1.4 Execution of the Rigid Tap Removal Cycle 28
2.1.5 Particular Conditions for Tap Removal on Sight 28
3 Change in Spindle Synchronisation 29
3.1 Functional Description of the Software 29
3.1.1 Speed-Dependent Acceleration 29
3.2 Spindle Synchronisation with Master Spindle
Speed Control 30
3.2.1 Corrector with Integral Action 30
3.2.2 Corrector with Variable Phase Lead 31
3.3 Man/Machine Interface 32
3.4 Principle of Use of the Software Product 33
3.4.1 Setting Procedure 33
3.4.2 Programming Spindle Synchronisation 33
3.5 List of Parameters E Relative to Spindles 36
4 Resumption of Thread Cutting 38
4.1 General 38
4.2 Programming 38
4.3 Constraints 39
4.4 Inclusion of function G38+ in Cycle G33 39
4.4.1 Syntax of Resumed Thread Cutting Included
in the Call to Cycle G33 39
5 Miscellaneous Changes and Updates 40
5.1 Creation of CNC Files 40
5.2 Section 6.5, Message display with wait
operator response 40
5.3 Automatic Homing Cycle 40
5.3.1 Homing Mode 40
5.3.2 Call by Function G159: AUTO (or MDI) Mode 42
5.3.3 Axes Synchronised by Machine Parameters 43
5.3.4 Spindle/C-axis switching in DISC NT 43