Руководство по эксплуатации Вытяжка ... - Schwab

12
Installation Preparation
Installing the air hose for extraction mode
1. Install the hose connection 4 using the screws 7 and the washers 6 above the
hood’s chimney opening.
2. Connect the exhaust air hose (not supplied) onto the hose connection 4.
Afix the hose onto the hose connection using the hose’s clamp.
3. Insert the upper end of the exhaust air hose through the wall breakthrough in
such a way that the hose reaches the outside edge of the wall.
Important!
In order to keep noise level to a minimum and employ the performance
of the hood optimally, we recommend using a suitable exhaust air hose.