1 - Panasonic
1 - Panasonic
1 - Panasonic
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
E<br />
10<br />
Battery Charging<br />
There are 2 ways to charge the battery.<br />
Charge with the battery pack attached to the computer.<br />
When you attach the computer ( steps 1 to 3 on page 8) with the AC adaptor attached<br />
to the Cradle, the battery attached to the computer is automatically charged.<br />
Charge with the battery pack attached to the Cradle.<br />
1 Connect the AC adaptor to the Cradle. ( step 2 on page 8)<br />
2 Remove the battery pack from the computer. ( Reference Manual)<br />
3 Insert the battery pack into the charging slot of the Cradle.<br />
Charging status indicator’s operation<br />
Charging status indicators<br />
Orange : Charging<br />
Green : Fully-charged<br />
Blinking red : Battery pack or Cradle may not be working properly. Quickly<br />
remove the battery pack and disconnect the AC adaptor, then<br />
connect them again. If the light continues to blink red, the battery<br />
pack or Cradle may be faulty.<br />
Blinking orange : Charging has been temporarily terminated as the internal<br />
temperature of the battery pack is outside the range possible for<br />
charging. Charging will start automatically when the temperature<br />
is restored to within this range.<br />
Please wait.<br />
Not lit :<br />
Battery pack is not properly inserted.