Tornado - Produkte von Arjohuntleigh bei ppm-marburg

Fault message
A red lamp lights up
If the red lamp at O lights up, disinfection has been aborted owing to low
temperature or some other fault. The display shows a message stating
the cause of the fault in plain text.
Acknowledging a fault message
Some messages need to be acknowledged before the machine can be
returned to run mode. When the cause of the fault has been found and
the fault has been put right, the fault message is acknowledged as
follows:
First press the s button and then the tbutton. Keep both buttons
pressed at the same time for 10 seconds.
The machine is now ready to operate. Re-run the aborted program if the
items are still in the machine. If the fault persists, call service personnel.
Power failure
2
If the power fails during a process, the machine remains locked. When the power
returns, the machine automatically restarts the interrupted process.
8 Edition 2005-06-25 Instruction manual 5014905-00 Rev A
1