2 - Vanden Borre

Recommended audio output setting
Downloaded from www.vandenborre.be
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the
items.
Press [FUNCTION MENU] select “To Others” [OK] select “Setup” [OK] select
“Sound” Set each item
For details of the each item, refer to page 29.
“Digital
Audio
Output”
Example of connected equipment
TV via HDMI *1
Receiver with
HD audio *2 Receiver without
decoder
via HDMI
HD audio *2 Setup menu
decoder
via HDMI
Receiver via OPTICAL
“Dolby D/Dolby D
+/Dolby TrueHD”
“PCM” “Bitstream” “PCM” “PCM”
“DTS/DTS-HD” “PCM” “Bitstream” “PCM” “PCM”
“BD-Video
Secondary Audio”
“Off” “Off” “Off” “Off”
“PCM Down Conversion” No effect No effect No effect “Off” *3
“Downmix” “Stereo” No effect No effect “Stereo” *4
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*1 If connected to TV via the OPTICAL or AUDIO OUT terminal, these settings have no effect.
*2 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*3 If the connected equipment that does not support 96 kHz, set to “On”.
*4 If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
37
(37)
VQT2U34
ENGLISH