Wichtige Voraussetzungen für die erfolgreiche Montage - Closomat

Dear sanitation plumber and partner,
You have a CLOSOMAT PALMAVita, the genuine douche-WC, to install. Our customer expects a great
deal from this high-class product, which left our works after stringent testing. As manufacturers, we shall
appreciate your careful workmanship so that the customer can accept the equipment in perfect condition.
If you proceed according to these instructions, you will install the CLOSOMAT quickly and without problems.
Please ensure that it is installed only by skilled persons adequately familiar with sanitation or in particular with
CLOSOMAT. They should also understand one of the three languages in which these instructions are given.
The appropriate technical service for your country will be pleased to answer any questions (see on reverse
side).
Important requirements for successful installation
Vital information lead
Read these instructions through completely before starting work, so that you grasp the interrelations and can
then take the job in your stride.
Don’t install too soon
Install the CLOSOMAT only when all other people (plasterers, painters, tile layers, etc.) have finished.
This will avoid damage such as scratching, besides misuse of the CLOSOMAT as a sink or site toilet.
Check the delivery
Check with the data on the label and packing whether the model, colour and version correspond to the order.
Check connections
• Electrical connection
– Check whether voltage is present and the circuit has an earth-leakage circuit braker.
– Check whether the safety distances (protection zones) from the other sanitation equipment conform to
the regulations in force.
• Water connection (cold water only needed)
Check whether the mains can deliver at least 7 litres per minute and the continuous static pressure is
0.8 MPa (8 bar) max.
25