INSTALLATION INSTRUCTIONS 30" (76.2 CM) GAS ... - Jenn-Air

9. Position blower motor in cabinet opening and mount blower
motor to the floor.
Top View
Option 1 Option 2
Left Side Venting
1. Mark cabinet side for left side vent hole location.
B
A
A
B
A
A. 31³⁄₁₆" (79.2 cm) from top of cabinet
B. 18" (45.7 cm) from back wall
B
2. Mark and cut a 5½" (13.9 cm) diameter hole in the cabinet
side.
A. Inlet from range
B. Exhaust outlet
10. Connect vent system to blower motor outlet (option 1 shown)
with 4 - #8 x ¾" hex head screws provided.
A
B
A. 5½" (13.9 cm) diameter hole
A
B
3. Mark and cut a 14" x 11" (35.6 x 27.9 cm) opening in the floor
of the cabinet.
Top View
C
D
A. Inlet
B. Vent clamp
C. Floor
D. Vent system
A
11. Go to the “Make Gas Connection” section.
B
A. 11" (27.9 cm) from front of cabinet
B. 14" (35.6 cm) from left side of cabinet
13