ZA 35/85/105/155-BSY+(-HS) - D+H Mechatronic

Technical dataTypePower supply 24 VDC, ±15% 24 VDC, ±15% 24 VDC, ±15% 24 VDC, ±15%Nominal current 0,5A(1,2A) 1,0A(2,0A) 1,2A(2,2A) 1,4A(2,5A)Nominal force 300 N 800 N 1000 N 1500 NNominal locking force 1100 NLifetime>10 000 double strokesDuty cycle30 % (With cycle time 10 minutes)HousingAnodized aluminium / polycarbonateIngress protection IP 65Temperature range -5 ... +75°CFire stability 30 min / 300°CNominal stroke length* See type plateAdditional functions * Closing edge protection activated (3 stroke repeatings)* Programmable with software SW-BSY+ZA35-BSY+(-HS) ZA85-BSY+(-HS) ZA105-BSY+(-HS) ZA155-BSY+(-HS)Running speed and forces23mmClosure RangesI III5 mm/sII77mm5 mm/s~7,1 mm/s / ~8 mm/s (~17 mm/s)Normal operation =SHEV- fast running =7,1 mm/sForcesOPENCR IIICR IICR ICLOSEZA 35 ZA 85 ZA 105 ZA 155300 N300 N300 N800 N 1000 N 1500 N800 N 1000 N 1000 N800 N 1000 N 1000 N300 N 800 N 800 N 800 NAll forces+ approx. 20 % switch-off reserve(temporary)Closing edge protectionIn "CLOSE" direction the drive has an activeprotection for the main closing edge. With anoverload in the closing range 3 and 2 the drive runs"OPEN" for 10 seconds, then drive "CLOSE" again. Ifafter three attempts a closing is not possible, thedrive remains in this position.In addition, the drive has a passive protection. Theclosing speed in closure Range 2 and 1 is reduced to5 mm/s.Higher forces can occur on besidesclosing edges. Danger of violentpressure in handaccessible area.8/20 ZA-BSY+EnglishMain closing edgeBeside closing edgeBeside closing edge99.824.31 1.2/03/12