Mode d'emploi

Preparing for Use■ Using Battery Power1. Prepare one alkaline battery (6LR61: 9V, S-006P).*A manganese battery can be used but battery lifemay be extremely short depending upon the batterytype.2. Make sure that the power switch is set to itsOFF position then remove the battery coverfrom the rear panel.3. Check the alignment and polarity markings(+/–) on the battery, attach the battery to thebattery terminal then replace the batterycover.■ Using a Power Adaptor1. Make sure that the power switch is set to itsOFF position, then connect the poweradaptor’s DC plug into the device’s DC IN 9Vjack.2. Connect the power adaptor’s AC plug to anAC wall outlet.Power adaptorPower adaptor jack* If the power adaptor is connected when a battery isinstalled in the device, power is automatically suppliedfrom the power adaptor.* Make sure only the specified power adaptor is used.The use of any power adaptor other than the onespecified may result damage, fire, etc. Doing so mayvoid the warranty even if the device is still withinthe warranty period so please use caution.* When battery power gets low, the volume outputwill be reduced or the display will grow dim. If thisis the case, replace the battery with a new one assoon as possible.Cautions Regarding Memory Backup• This device has no data backup capabilities to preserve data when the battery is removed or when the AC adaptor isdisconnected.• If the device is left without power supplied from a battery or AC adaptor, song and chain program data created by theuser will be lost.• To replace the battery without loosing data connect the AC power adaptor to the device while changing the battery or,change the battery before battery power is completely exhausted and complete the battery changing procedure within3 minutes.• The device’s vibrator grows weak as battery power depletes.• When the display dims, the battery should be replaced as soon as possible.14