Toyota Child restraint seat - 73700-0W160 - Child restraint seat - Mini - mode d'emploi

! Note: The „For use in aircraft“ label is located
on the bottom of the child car seat, alongside the
nameplate.
The child car seat has been authorized solely for
forwards-facing passenger seats, without airbags,
that have been approved by the airline for use with a
child car seat.
CAUTION
In aircraft, the child car seat must be positioned
on the passenger seat against the direction
of travel, using a two-point safety belt (as
described in these instructions). Throughout the
entire flight (from the moment the cabin doors
are closed until they are opened again) ensure
that the child car seat is properly secured via
the two-point belt. Otherwise, other passengers
may be injured by the seat, should it come loose
during turbulence or an emergency landing.
WARNING!
The child car seat may only be attached in
an aircraft via a two-point seatbelt. Without
exception, the seat must be secured via a threepoint
seatbelt or the Toyota ISOFIX BASE when
used in a vehicle.
Step 1
Prepare the seat
[MINI_028] To install the child car seat in the
aircraft, the carry handle must be set upright in the
carry position.
Step 2
Place on the passenger seat
[MINI_029] Place the child car seat in a backwardsfacing
position on the passenger seat.
WARNING!
[Airbag Warning] NEVER fit the child car seat in a
backwards-facing position on a passenger seat
with the airbag activated. There is a SERIOUS
RISK OF INJURY OR DEATH.
EN
DE
FR
IT
ES
NL
Lexus or Toyota MINI 19