CDP 75/125/165 - Dantherm Air Handling AS
CDP 75/125/165 - Dantherm Air Handling AS
CDP 75/125/165 - Dantherm Air Handling AS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9<strong>75</strong>672 • Version 3.4 • 13.02.2012<br />
Display, continued<br />
Push buttons Push-buttons on the inspection side of the unit allows switching on and off dehumidification,<br />
heating coil and fan.<br />
Illustration The illustration shows the push buttons:<br />
Positions of the<br />
push buttons<br />
Functions of the<br />
push button<br />
An overview of the meaning of the push buttons<br />
is given below<br />
To switch on or off the functions, the setting of the push-buttons should be as follows:<br />
OFF (A) Resetting (B)<br />
The table gives an overview of the push button functions:<br />
Push button Description<br />
By means of the push-button with a Drop symbol, dehumidification<br />
can be switched off (A) or on (B)<br />
By means of the push-button with a Fire symbol, the heating coil<br />
can be switched off (A) or on (B)<br />
In position (A) the Fan is switched off and only runs if required –<br />
i.e. in accordance with the demand for dehumidification and/or<br />
heating<br />
In position (B) the fan run continuously – i.e. independent of the<br />
demand for dehumidification and/or heating<br />
29