Installation - Michael W. Buder
Installation - Michael W. Buder
Installation - Michael W. Buder
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Oven Assembly<br />
<strong>Installation</strong><br />
CONVEYOR<br />
1. Slide the conveyor belt supports in the guides<br />
with the gear wheel on the drive motor side.<br />
SeeFigure4.<br />
2. Install the conveyor belt assembly in the<br />
guides with the gear wheel on the drive motor<br />
side.<br />
3. Install the drive chain on the motor. See<br />
Figure 5<br />
Figure 4<br />
Figure 5<br />
4<br />
4. Install the conveyor belt as shown. See<br />
Figure 7 through Figure 13.<br />
NOTE: To reverse the direction of the drive motor<br />
(if necessary), exchange A1 and A2. See<br />
Figure 6.<br />
Y OR BL<br />
S3 S2 S1<br />
SPEED<br />
CONTROL<br />
L2 L1<br />
W<br />
V<br />
A1 A2 A3<br />
BK<br />
W<br />
Figure 6<br />
AC<br />
AC<br />
Figure 7<br />
GND<br />
DC MOTOR<br />
Belt Top<br />
Direction of<br />
Conveyor Travel
Change language