16.01.2013 Views

High Efficiency 3.0 High Efficiency 3.6 - Donauer Solartechnik ...

High Efficiency 3.0 High Efficiency 3.6 - Donauer Solartechnik ...

High Efficiency 3.0 High Efficiency 3.6 - Donauer Solartechnik ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

EN<br />

Graphical yield (day, month, year)<br />

Daily, monthly and annual yields can be displayed graphically in a Chart.<br />

2<br />

Event messages<br />

1 4<br />

Generator characteristic curve<br />

2 3<br />

System information<br />

1<br />

3<br />

1<br />

� Period for a single yield value (here: daily yield)<br />

� y-axis:<br />

– Yield in kWh<br />

– With an extra M: yield in MWh<br />

– The scaling changes depending on the maximum value<br />

� x-axis: time in hours/days/months/years<br />

� Total of all individual yields shown in the diagram, in kWh<br />

The graphical representation can show annual yields for the<br />

last 20 years.<br />

See Section 11, p. 65.<br />

� X-axis: Input voltage in V<br />

� Y-axis: Power in kW<br />

� Peak = MPP<br />

When the Gener. Ch. Curve menu item is called the inverter<br />

records the generator characteristic curve of the module and<br />

then displays it (Fig. upper left). The following applies:<br />

• The inverter traverses the entire input voltage range and<br />

records the power generated over this range. Duration: a<br />

few seconds, is displayed.<br />

• The MPP is the peak of the generator characteristic curve.<br />

• This peak and the generator characteristic curve change<br />

with the level of solar irradiation.<br />

• Multiple peaks are a sign of partial shadowing (Fig. lower<br />

left).<br />

The Information menu item contains the following 4 submenu<br />

items.<br />

• Contact information<br />

• System information (see fig. left):<br />

– Product designation<br />

– Serial number of the inverter<br />

– Information on the software and hardware versions of<br />

the inverter (see example � in fig. left)<br />

– Configured inverter address<br />

– Version of the operating instructions for the inverter<br />

• Country parameters: configured country and parameters;<br />

see also p. 70.<br />

• Self test: result of the last successfully performed self<br />

test (only when the configured country is Italy)<br />

46 742.641 | 11.43

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!