HWA 1001 INOX HWA 1300 F - AL-KO Garten + Hobby
HWA 1001 INOX HWA 1300 F - AL-KO Garten + Hobby
HWA 1001 INOX HWA 1300 F - AL-KO Garten + Hobby
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• If the pump runs trouble-free, put it into<br />
operation as described in the instructions.<br />
Removing and mounting of non-return<br />
valve, cleaning (<strong>HWA</strong> <strong>1300</strong> F)<br />
• Remove the filter (see Section "cleaning the<br />
filter").<br />
• Unscrew the non-return valve (21) and clean<br />
it under flowing water.<br />
• Renew seal (22) if necessary.<br />
• Install the non-return valve.<br />
• Install the filter and filter cover.<br />
Frost protection<br />
Disposal<br />
RL 2002/96 EG<br />
Your domestic water system is susceptible to low<br />
temperatures. Make sure to empty the device of<br />
residual liquid (hoses, pump and reservoir) and<br />
store it so that it is protected from frost.<br />
• Empty the suction and pressure hoses.<br />
• Remove the draining screw (6) and (7) (<strong>HWA</strong><br />
<strong>1300</strong> F) drain all water from the pump chamber.<br />
• Replace the draining screw and store the<br />
device so that it is protected from frost.<br />
Do not dispose of worn-out units through the household garbage!<br />
The appliance, its packaging and accessories are all produced from recyclable<br />
materials and must be disposed of accordingly.<br />
GB 5 Translation of original user instructions