RLROBC0301XW manual.pdf - E-milione E-milione

Rolando BC 301 XW TOKEN
USER AND MAINTENANCE MANUAL
Timer with countdown
Scale operation
Point 1:
Press “START/MODE”: the receiver will enter countdown mode (shown on the LCD display).
Next, turn the “UP/DOWN” clockwise to increase the seconds, or counter-clockwise to decrease
them. Press “START/MODE” to start the countdown.
- 19/24 -
Turn the “UP/DOWN” key
Point 2:
While the scale is in countdown mode, by pressing “START/MODE” you can stop the timer. Now
hold “START/MODE” pressed for 2 seconds: the countdown is reset and you can set a new time
on the timer.
Point 3:
When the countdown timer displays “00:00”, the alarm will start sounding, and the timer simultaneously
starts the countdown. To silence the alarm and stop the countdown, press any key on
the scale; if the alarm has not sounded after 1 minute, the countdown will stop at “99:59” and
flash.
Weighing
Point 1:
Place the scale on the surface, properly position the receiver and scale and slightly press the
scale. When the stop light flashes, press the scale; the receiver will ring when it receives the
signal and you can start weighing once the LCD display reads zero.
Point 2:
By pressing “START/MODE” in weighing mode, you can change the unit from g to oz.
Point 3:
Place the food on the surface: the LCD display reads the weight.
eng