Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Read this manual carefully to learn how to operate<br />
and service your machine correctly. Failure to do so<br />
could result in personal injury or equipment damage.<br />
This manual should be considered a permanent part<br />
of your machine and should remain with the machine<br />
when you sell it.<br />
Right-hand and left-hand sides are determined by<br />
facing the direction the implement will travel when<br />
going forward.<br />
Setting fuel delivery beyond published factory specifications<br />
or otherwise overpowering will result in loss<br />
of warranty protection for this machine.<br />
This lawn mower is designed solely for use in<br />
customary lawn mowing („intended use“). Use in<br />
any other way is considered as contrary to the<br />
intended use. The manufacturer accepts no liability<br />
for damage or injury resulting from this misuse, and<br />
these risks must be borne solely by the user. Compliance<br />
with and strict adherence to the conditions of<br />
operation, service and repair as specified by the<br />
manufacturer also constitute essential elements for<br />
the intended use.<br />
This lawn mower schould be operated, serviced and<br />
repaired only by persons familiar with all its particular<br />
characteristics and acquainted with the relevant safety<br />
rules (accident prevention). The accident prevention<br />
regulations, all other generally recognized<br />
regulations on safety and occupational medicine<br />
must be observed at all times. Any arbitrary modifications<br />
carried out on this lawn mower will relieve<br />
the manufacturer of all liability for any resulting damage<br />
or injury.<br />
Safety instructions are marked<br />
at the beginning of the text<br />
as follows: <br />
Special attention should be paid to these sections<br />
for your own safety!<br />
1. Key to picture 1<br />
GB<br />
1 Safety control bracket for engine brake<br />
2 Vario application<br />
3 Drive control bracket<br />
4 Guide spar top section<br />
5 Guide spar bolt connection<br />
6 Guide spar bottom section<br />
7 Dust ejection door<br />
8 Engine<br />
9 Handle for cutting height regulation<br />
10 Spark-plugs<br />
11 Airfilter<br />
12 Tank cap<br />
13 Collecting sack with TurboSignal<br />
14 Bowden feed<br />
15 Starter rope handle<br />
16 Operating handle for engines<br />
<br />
21